..., fractures, and becomes cylindrical, which confirms the adhesive wear mechanism. The datasets generated and supporting the findings of this article are obtainable from the corresponding author upon reasonable request. References [1] Kocovic , P. , 2017 , 3D Printing and Its Impact...

... of materials. A LAM Hastelloy C22 was prepared by rotating strategy in this study, and the wear mechanism induced by heat treatment was investigated. The microstructural results showed that the columnar structure with the size of 1 ∼ 4 μm and the cellular structures with the size of 0.3 ∼ 1 μm were observed...

... three aspects of the micro-cutting, erosion peeling caused by the plastic deformation, and local gouging abrasion. The change of erosion angle led to the change of normal and tangential force components of erosion particles on the wear surface, which changed the main wear mechanism of erosion wear...

... ournal of T ribology . 30 05 2022 15 08 2022 20 08 2022 26 09 2022 electroless coatings microstructure micro-scratching friction coefficient wear mechanism Performance and cost are two important criterion material candidates are expected to excel in to be able...

...Yuankai Zhou; Mengdi Du; Xue Zuo In order to study the influence of current on the temperature rise and wear mechanism of the copper–graphite friction pair, the pin-disc current-carrying friction experiments were carried out under different current conditions. The friction coefficient, temperature...

...Qi Sun; Shijie Wang; Xiaoren Lv The tribological properties and wear mechanisms of ethylene propylene diene monomer (EPDM) with different carbon black contents under dry friction conditions are studied on an UMT Tribolab friction and wear tester. The variation of carbon black content in EPDM does...

...Jianhang Chen; Siyang Gao; Peng Wang; Weihai Xue; Shu Li; Deli Duan The tribological behavior of zinc phosphate impregnated graphite (ZPIG) against nickel-based superalloy (GH4169) in oil environment was investigated, and the lubrication and wear mechanism were also determined in this study...

... Al alloy sliding wear wear mechanism hardening effect scraper conveyor third bodies 13 07 2020 09 12 2020 10 12 2020 29 01 2021 Contributed by the Tribology Division of ASME for publication in the J ournal of T ribology . Email: 1129694135@qq.com Email...

... that of HESP; the wear mechanism of the coatings sprayed by HESP is the laminar cracking, peeling off and the adhesive wear. Email: 15754505018@163.com Email: majianlong5257@163.com Email: zhulina@cugb.edu.cn Email: wanghaidou@aliyun.com Email: liguolu@hebut.edu.cn Email: hzaam@163.com...

...; published online March 4, 2019. Assoc. Editor: Yi Zhu. 26 10 2018 29 01 2019 29 01 2019 SrSO 4 ceramic tribological properties high temperature wear mechanism In recent years, solid lubricants have been initiated as a response to the demand for lubricating under...

... November 24, 2018; published online January 16, 2019. Assoc. Editor: Yi Zhu. 13 06 2018 24 11 2018 composite stir casting abrasion friction wear mechanism RSM multiresponse optimization ANOVA Metal matrix composites (MMCs) are manufactured by various techniques...

... is in view of the generation of higher frictional heating causing material degradation to a greater extent and suggests the change in the wear mechanism from mild to severe wear. Significantly higher transition load and also the seizure load for the composites over that of the base alloy (Fig. 4 ) could...

... lubricant particles can be provided during the tribological collaboration and how the wear mechanism of the Al 2 O 3 /WS 2 -plastic PEEK/BG sliding pair looks like. The reliability of elements during tribological cooperation depends largely on the quality and condition of the surface layers involved...

... /N m with a friction coefficient of 0.60. Under a higher normal load of 6 N, the lower specific wear rate with a sliding speed of 0.29 m/s was 7.9 × 10 −6 mm 3 /N m with a friction coefficient of 0.80. When the applied load increased from 2 to 6 N, a transition of the wear mechanisms from oxidative...

... deformation and adhesion are dominant in wear mechanisms, which develop a two-body abrasive wear system. Subsequently, excessive plastic deformation results in spalling, oxidation, and developing flow of hard wear debris. This debris acts as third bodes and leads to activation of a three-body abrasive wear...

... dendrites eutectic alloys friction oxidation wear resistance Fe-B alloy dendrite composite friction wear mechanism Machine parts are required to have good reliability and wear resistance under severe operating conditions, such as large load and high speed, because the technology...

... fibers improve the wear resistance significantly. Samples with transverse fiber orientation show mostly abrasive wear, whereas, monolithic and parallel samples show adhesive wear mechanism. In addition, SiC reinforcements improve the wear resistance of the composite and the monolithic samples. Since...