... the findings of this article are obtainable from the corresponding author upon reasonable request. The authors attest that all data for this study are included in the paper. References [1] Scharf , T. W. , and Prasad , S. V. , 2012 , “ Solid Lubricants: A Review ,” J. Mater. Sci. , 48 ( 2...

..., a comparative study on the friction properties of their blends with pristine carbon nanofibers (CNFs) and fluorinated ones (CF 0.85 ) was investigated, based on which they were intended to be used as solid lubricant additives. An adsorption effect of fatty acid molecules is observed in CNFs particles unlike CF...

... in the J ournal of T ribology . 08 03 2021 14 05 2021 15 05 2021 07 06 2021 composite coating design of experiments MoS 2 response surface methodology solid lubricants TiO 2 ZrO 2 coatings dry friction tribological systems The application of solid...

...Adedoyin Abe; Dipankar Choudhury; Min Zou Polytetrafluoroethylene (PTFE) is a solid lubricant with low friction coefficient. However, it lacks durability as a thin coating. Prior studies have shown that a polydopamine (PDA) underlayer enhances the coating durability. In this study, 100, 200...

...: philippe.bilas@univ-antilles.fr 24 03 2020 21 09 2020 21 09 2020 29 10 2020 dry friction fluid friction mixed lubrication solid lubricants Graphite and hexagonal boron nitride (hBN) present good lubrication properties due to their lamellar structure characterized...

... friction sliding solid lubricants wear Researchers are working continuously on ceramic composites for their use in wear-resistant applications owing to superior mechanical characteristics. Due to high hardness, fracture toughness, and anti-corrosion properties, ceramic materials are widely used...

... 2020 13 08 2020 28 09 2020 PTFE/PEEK composite friction coefficient mechanical properties transfer films friction mechanisms micromechanics-based friction theory sliding contact solid lubricants Engineering thermoplastics and their composites are used extensively...

... that contain 5, 7.5, 10, 12.5, and 15 wt% solid lubricants were evaluated. Morphologies, such as micropores and ball and scratch, were characterized after the rotating sliding tests. A high lubricant concentration could adversely affect the flexural strength of as-sintered samples because of the formation...

... Email: 460140536@qq.com Contributed by the Tribology Division of ASME for publication in the J ournal of T ribology . 04 07 2019 08 02 2020 09 02 2020 19 02 2020 Cu/Ti 3 AlC 2 composites tribological properties elevated temperatures friction solid lubricants...

... is attributed to the formation of a mixed tribofilm on the wear tracks supported by the underlying densified matrix. Wear mechanisms are also discussed here. sliding dry friction solid lubricants wear References [1] Zhang , Z. , Dong , Y. , Li , F. , Zhang , Z. , Wang , H...

...@mech.iitd.ac.in Email: p.roy@cmeri.res.in Email: n_mandal@cmeri.res.in Contributed by the Tribology Division of ASME for publication in the J ournal of T ribology . 17 05 2019 26 09 2019 26 09 2019 01 10 2019 abrasion friction solid lubricants wear Currently...

... on the preliminary findings from dry and wet tribology with some selected composites, Al–B 4 C/EN31 tribopair is subjected to the particle-based lubrication by selecting different types of solid lubricants (boric acid, MoS 2, and MWCNT) as oil additives. The present study reveals the following interesting facts...

... , E. R. , 2008 , Applied Tribology: Bearing Design and Lubrication , 2nd ed. , Wiley , Chichester, UK. Friction Hydrodynamic lubrication Journal bearings Solid lubricants Third bodies In the hot working environment, the application of conventional oil-lubricated journal...

... RIBOLOGY . Manuscript received June 29, 2017; final manuscript received September 26, 2017; published online October 27, 2017. Assoc. Editor: Satish V. Kailas. 29 06 2017 26 09 2017 Lubricant additives Solid lubricants Wear Finished oil contains a package of additives...

...: Robert Wood. 07 03 2017 26 06 2017 Abrasion Metalworking Micro-tribology Sliding Solid lubricants During machining, cutting fluids are mainly used to remove the heat generated, improve tribological properties, and flush the chip and debris. Cutting fluids reduce machining...

.... Assoc. Editor: Dae-Eun Kim. 21 07 2016 23 11 2016 Friction Gas (air) bearings Sliding Solid lubricants Thrust bearings Wear Wear mechanisms Magnesium is an attractive material for the automotive purpose, mostly because of its light weight—36% lighter than aluminum...

... of Cenosphere and Barium Sulphate Based Friction Composites ,” Wear , 309 ( 1–2 ), pp. 259 – 268 . 10.1016/j.wear.2013.12.001 [5] Allam , I. M. , 1991 , “ Solid Lubricants for Application at Elevated Temperatures ,” J. Mater. Sci. , 26 ( 15 ), pp. 3977 – 3984 . 10.1007/BF02402936 [6...

...Xijun Hua; Julius Caesar Puoza; Jianguo Sun; Peiyun Zhang; Jinghu Ji; Hao Wang; Hao Fu; Zhengyang Kang Experimental studies of friction and wear on textured surfaces filled with composite solid lubricant and lubricated with grease were conducted on a sliding plain bearing to enhance the working...

... June 21, 2015; final manuscript received January 13, 2016; published online July 8, 2016. Assoc. Editor: Zhong Min Jin. 21 06 2015 13 01 2016 Polymeric additives Sliding Solid lubricants Wear Wear mechanisms Under conditions of dry sliding, PTFE is commonly observed...

... friction Solid lubricants Wear Lubricants that are effective at extreme operating temperatures above 800 °C are necessary for new-generation high-performance gas turbine engines with increased propulsion capability [ 17 – 19 ]. However, effective high temperature lubrication is a significant...