... 31 05 2023 08 06 2023 Email: kanza.basit@pnec.nust.edu.pk Email: hamza.shams@pnec.nust.edu.pk Email: muhammad.a.khan@cranfield.ac.uk Email: drasifmansure@pnec.nust.edu.pk contact dry friction sliding stick-slip tribological systems wear Accepted Manuscript...

... Email: hsingh_nitk@rediffmail.com Email: s_k_tomar02@yahoo.com 1 Corresponding author. Email: vaibhavgangwarme@gmail.com microwave casting setup process parameters wear-rate SEM XRD EDS Taguchi technique ANFIS adhesion dry friction hardness wear References [1...

... (WR) coefficient of friction (COF) artificial neural network (ANN) adaptive neuro-fuzzy inference system (AnFIS) decision tree (DT) dry friction References [1] Kulekci , M. K. , 2008 , “ Magnesium and Its Alloys Applications in Automotive Industry ,” Int. J. Adv. Manuf...

... 2023 1 Corresponding author. Email: jerzy.dryzek@ifj.edu.pl Email: mwrobel@agh.edu.pl subsurface zone dynamical recrystallization vanadium positron annihilation electron backscatter diffraction dry friction wear References [1] Moore , M...

... roughness transfer layer laser shock peening dry friction surface treatments tribology References [1] Ralls , A. M. , Kumar , P. , and Menezes , P. L. , 2021 , “ Tribological Properties of Additive Manufactured Materials for Energy Applications: A Review ,” Processes...

....com Contributed by the Tribology Division of ASME for publication in the J ournal of T ribology . 05 09 2022 02 11 2022 04 11 2022 14 02 2023 selective laser melting titanium wear mechanisms mechanical properties cutting dry friction National Natural...

... molecules forms on the surface of the ceramic tribopair as shown in Figs. 12( a ) and 12( b ) . Compared with dry friction environment in vacuum, CoFs in air are inevitably more stable. Elastic deformation occurs during the relative motion, and the shear stress compresses and cuts the surface material...

... contact mechanics dry friction hardness surfaces wear Additive manufacturing has found an increasing demand in a variety of industries and research issues due to its capacity to produce near-net shape and complex parts [ 1 – 4 ]. Due to its rapid material deposition and building rates, wire...

... 05 09 2022 06 09 2022 17 11 2022 laser additive manufacturing heat treatment Hastelloy c22 residual stress wear mechanism abrasion dry friction hardness surface treatments wear mechanisms National Natural Science Foundation of China 10.13039/501100001809...

... author. Email: bijaykumar.show@mme.nitdgp.ac.in Contributed by the Tribology Division of ASME for publication in the J ournal of T ribology . 19 07 2022 06 10 2022 06 10 2022 27 10 2022 nano-composite wear SEM abrasion adhesion dry friction Al alloy...

... Division of ASME for publication in the J ournal of T ribology . 27 09 2021 27 09 2022 27 09 2022 26 10 2022 dry friction surface layers wear mechanisms Owing to a high melting point, hardness, and high-temperature strength, tantalum carbide (TaC) is a typical...

... rubber aligned CNTs anisotropy frictional performance dry friction interface polymeric additives sliding National Natural Science Foundation of China 10.13039/501100001809 51975300 For centuries, rubber has been widely used in industrial applications related to tribological...

... ribology . 10 03 2022 21 06 2022 24 06 2022 04 08 2022 Cu–Zn alloy high temperature dry friction sliding wear mechanisms Copper and copper alloys are extensively applied in power industry, auto parts, and engineering machinery due to their high mechanical...

... particles break away three-body abrasive wear is produced. electrical plating copper oxide surface finish tribological behavior tin oxide aluminum adhesion coatings contact dry friction surface roughness and asperities surfaces wear wear mechanisms In this research, a total of five...

... aluminum matrix composites ceramic particles abrasion dry friction sliding Aluminum (Al) and its alloys have high corrosion resistance, low density, high thermal conductivity, good recycling properties, high specific strength, etc. [ 1 – 3 ]. However, Al alloys have incompetent wear properties...

... by the Tribology Division of ASME for publication in the J ournal of T ribology . 16 11 2021 28 02 2022 01 03 2022 03 05 2022 wear in space environment BMG alloy selection 3D profilometry revision of Archard wear coefficients dry friction gears hardness sliding surfaces...

... friction recovery instantaneous braking brakes contact mechanics dry friction surface properties and characterization wear mechanisms Phenolic resin-based short fiber reinforced and filled heterogeneous material system as composite friction materials are the part of the vehicle’s braking...

... roughness triboinformatics coefficient of friction wetting contact angle hydrophobic coating dry friction friction interface nano-tribology surface roughness and asperities National Science Foundation 10.13039/100000001 2028535 The COVID-19 pandemic has encouraged researchers...

... [ 30 ]. PTFE/PEEK composite composite microstructure PTFE morphology apparent PTFE friction coefficient friction mechanisms mechanism-based friction theory contact dry friction interface 05 11 2021 24 01 2022 24 01 2022 28 02 2022 Contributed by the Tribology...

... 14 02 2022 dry friction hardness sliding wear Aluminum matrix composites (AMCs) are produced by adding particles with different properties into the Al alloy by various methods in order to be used in applications requiring functional properties. In particle reinforced aluminum...