... failed due to excessive cross-sectional deformation. Several incidents of rupture or fracture in the pipe wall were observed at the sharp fold of the wrinkle on the compression side of the deformed pipe. 14 04 2010 20 07 2010 20 01 2011 20 01 2011 bending strength compressive...

... 12 05 2008 07 04 2009 bending strength cracks crude oil failure (mechanical) fatigue fatigue testing pipes test equipment The primary objective of the research endeavor described in this paper was to compare the fatigue strength of epoxy fiberglass composite pipes...

... pressure and compression moment became evident where the outer diameter/wall thickness of a cylinder is large and the yield ratio of the material is small. 08 09 2006 16 01 2007 23 01 2008 bending strength compressive strength finite element analysis plastic deformation tensile...

... of appropriate material data. The physical assumptions adopted conform to those of the R5 life assessment procedure. The resulting semi-analytic model provides a more secure method for extrapolation of experimental data than previously available. 03 02 2006 14 07 2006 welds bending strength...

... recommendations are made, consistent with the ASME∕PVRC tightness-based methodology. 14 12 2005 01 05 2006 pressure vessels flanges gaskets leak detection bending strength design engineering flange joints leakage external moments external loads Flanged joints are essential...

... 10 11 2005 bending strength bending machines carbon steel elastoplasticity finite element analysis stress-strain relations pressurized elbow in-plane bending biaxial ratcheting pressure piping kinematic hardening Pressurized piping is widely used in nuclear, electric...

... caused by pitting corrosion is shown in Fig. 3 . Reduction of cross-sectional area caused by pitting corrosion of the reinforcing steel bar steel concrete corrosion mortar ultrasonic materials testing bending strength construction components ultrasonic transducers acoustic...

... heat exchangers bending strength mechanical strength pressure vessels finite element analysis Tube-to-tubesheet (T/TS) joints are used in tubular heat exchangers serving a variety of applications, including nuclear and conventional power generation, water treatment, and chemical industries...

... analysis bending strength thermal stresses internal stresses classification finite element analysis Hechmer and Hollinger 1 gave descriptions of an initial Pressure Vessel Research Council (PVRC) study. The work defined preliminary needs for guidelines to assess finite element analysis (FEA...