Circumferential ring stiffeners are commonly used to improve the buckling strength of cylindrical shells. Under special circumstances, stiffener ring needs to be partially cut in order to avoid interference with vessel attachments or surrounding structures. No clear guideline is available in rule-based method to deal with such case. This paper investigates the extent of reduction in buckling capacity for a range of cylindrical shell geometries with stiffener rings having different cross sections and different extents of circumferential cut. Finite-element (FE)-based analysis as per ASME Section VIII, Division 2, Part 5 has been employed to determine the permissible external pressure in each of the cases. Effects of ring cross section and extent of circumferential cut of stiffening ring on the maximum permissible external pressure have been presented. A total of 63 combinations of shell-stiffening ring configurations of different L/D, D/t ratios, cross section shape, and extent of cut have been investigated. Geometrical parameters for these combinations under study are so chosen that normal working range in industries is covered. The results obtained provide guidelines to design shells with partially cut stiffening rings.

References

1.
De Paor
,
C.
,
Kelliher
,
D.
,
Cronin
,
K.
,
Wright
,
W.
, and
McSweeney
,
S.
,
2012
, “
Prediction of Vacuum-Induced Buckling Pressures of Thin-Walled Cylinders
,”
Thin-Walled Struct.
,
55
, pp.
1
10
.
2.
Gusic
,
G.
,
Combescure
,
A.
, and
Jullien
,
J.
,
2000
, “
The Influence of Circumferential Thickness Variations on the Buckling of Cylindrical Shells Under External Pressure
,”
Comput. Struct.
,
74
(
4
), pp.
461
477
.
3.
Sosa
,
E. M.
,
2002
, “
Computational Buckling Analysis of Shells: Theories and Practice
,”
Mec. Comput.
,
21
, pp.
1652
1667
.
4.
Taeprasartsit
,
S.
, and
Tao
,
K.
,
2005
, “
Effect of Shell Geometry and Material Constants on Dynamic Buckling Load of Elastic Perfect Clamped Spherical Caps
,”
Asian J. Civ. Eng. (Build. Hous.)
,
6
(
4
), pp.
303
315
.
5.
Aghajari
,
S.
,
Abedi
,
K.
, and
Showkati
,
H.
,
2006
, “
Buckling and Post-Buckling Behavior of Thin-Walled Cylindrical Steel Shells With Varying Thickness Subjected to Uniform External Pressure
,”
Thin-Walled Struct.
,
44
(
8
), pp.
904
909
.
6.
Hauviller
,
C.
,
2007
, “
Design Rules for Vacuum Chambers
,”
CERN Accelerator School Vacuum in Accelerators
, Platja d' Aro, Spain, May 16–24, pp.31–42.
7.
Brar
,
G. S.
,
Hari
,
Y.
, and
Williams
,
D. K.
,
2010
, “
Calculation of Working Pressure for Cylindrical Vessel Under External Pressure
,”
ASME
Paper No. PVP2010-25173.
8.
Vasilikis
,
D.
, and
Karamanos
,
S. A.
,
2011
, “
Buckling Design of Confined Steel Cylinders Under External Pressure
,”
ASME J. Pressure Vessel Technol.
,
133
(
1
), p.
011205
.
9.
Nemeth
,
M. P.
,
2014
, “
Buckling Analysis for Stiffened Anisotropic Circular Cylinders Based on Sanders' Nonlinear Shell Theory
,”
NASA Technical Report No. NASA/TM-2014-218176
.
10.
ASME
,
2010
, “
Boiler & Pressure Vessel Code, Sec VIII Div 1
,” American Society of Mechanical Engineers, New York.
11.
ASME
,
2010
, “
Boiler & Pressure Vessel Code, Sec VIII Div 2
,” American Society of Mechanical Engineers, New York.
12.
Teng
,
J. G.
,
1996
, “
Buckling of Thin Shells: Recent Advances and Trends
,”
ASME Appl. Mech. Rev.
,
49
(
4
), pp.
263
274
.
13.
ANSYS Inc.
, 2015, “ANSYS 14.5 Help Manuals.”
14.
Brownell
,
L. E.
, and
Young
,
E. H.
,
1959
,
Process Equipment Design
,
Wiley
,
New York
.
You do not currently have access to this content.