The technology of large scale hydrogen transmission from central production facilities to refueling stations and stationary power sites is at present undeveloped. Among the problems that confront the implementation of this technology is the deleterious effect of hydrogen on structural material properties, in particular, at gas pressures of the order of , which are the suggested magnitudes by economic studies for efficient transport. In order to understand the hydrogen embrittlement conditions of the pipeline materials, we simulate hydrogen diffusion through the surfaces of an axial crack on the internal wall of a vessel coupled with material deformation under plane strain small scale yielding conditions. The calculation of the hydrogen accumulation ahead of the crack tip accounts for stress-driven transient diffusion of hydrogen and trapping at microstructural defects whose density evolves dynamically with deformation. The results are analyzed to correlate for a given material system the time after which hydrogen transport takes place under steady state conditions with the level of load in terms of the applied stress intensity factor at the crack tip and the size of the domain used for the simulation of the diffusion.
Interaction of Hydrogen Transport and Material Elastoplasticity in Pipeline Steels
- Views Icon Views
- Share Icon Share
- Search Site
Dadfarnia, M., Somerday, B. P., Sofronis, P., Robertson, I. M., and Stalheim, D. (July 1, 2009). "Interaction of Hydrogen Transport and Material Elastoplasticity in Pipeline Steels." ASME. J. Pressure Vessel Technol. August 2009; 131(4): 041404. https://doi.org/10.1115/1.3027497
Download citation file: