Abstract

In the present discussion, many errors have been found in the aforementioned paper and have been corrected.

First Error:

In Eq. (10) in Ref. [1], the term 2υΓuz2uz2 is wrong because its units are sec3/2 instead of m/sec2. The correct form is 2υΓuz2uz2.

Second Error:

In Eq. (11) in Ref. [1], the term 2υΓvz2vz2 is wrong because its units are sec3/2 instead of m/sec2. The correct form is 2υΓvz2vz2.

Third Error:

The term μ0(ρcp)(u2+v2) in Eq. (12) in Ref. [1] is wrong. The correct form is μ0(ρcp)((uy)2+(vx)2).

Fourth Error:

The term M2(Ecx(f)2+Ecy(g)2) in Eq. (24) in Ref. [1] is wrong. The correct form is M(Ecx(f)2+Ecy(g)2).

Fifth Error:

Equation (18) in Ref. [1] qrz=16σ*T33k*Tz is wrong. The correct form is qrz=16σ*T33k*2Tz2

Sixth Error:

v,x and u,y in Fig. 1 are wrong. The correct forms are u,x and v,y, respectively.

Seventh Error:

In Nomenclature, the units of magnetic field M are (σ*B02/aρ). This is wrong. The correct units are (σB02/aρ).

Eighth Error:

In Nomenclature, the units of specific heat are (JkgK). The correct units are (J/kg/K).

Ninth Error:

In Nomenclature, the dimensionless parameter Kp=υkp* is wrong because it is dimensional with units sec1. The correct form is Kp=υakp*.

Tenth Error:

In Nomenclature, the dimensionless parameter Nb=ζDB(CwC)α is wrong. The correct form is Nb=ζDB(CwC)αm.

Eleventh Error:

In Nomenclature, the dimensionless parameter Nt=ζDT(TwT)Tα is wrong. The correct form is Nt=ζDT(TwT)Tαm.

Twelfth Error:

In Nomenclature, it is written as Uw = stretching velocity along the y-direction. The correct is “along the x-direction.”

Thirteenth Error:

In Nomenclature, it is written as Vw = stretching velocity along the x-direction. The correct is “along the y-direction.”

Fourteenth Error:

In Nomenclature, the definition of radiation parameter Rd=16σ*T23kk* is wrong. The correct form is Rd=16σ*T33kk*.

Fifteenth Error:

In Nomenclature, the dimensionless parameter Mt=TfTβ+cs(TmTs) is wrong because it is dimensional with units m2sec2Kelvin. The correct form is Mt=cp(TfT)β+cs(TmTs).

Sixteenth Error:

In Nomenclature, it is written σ = Boltzmann constant (W/m2/K4). This is wrong. The correct form is σ = electrical conductivity (Ω1m1).

Seventeenth Error:

In Nomenclature, the parameter αm=kρ is wrong. The correct form is αm=kρcp.

Eighteenth Error:

In Nomenclature, it is written σ* = electrical conductivity (m2/s1). This is wrong. The correct form is σ* = Stefan–Boltzmann constant (kg/s3/K4).

Nineteenth Error:

In figures in Ref. [1] appear the parameter H, which is unknown. Its definition is H=Q0(ρcp)a.

Twentieth Error:

In Conclusions in Ref. [1], it is written “the case of fluid value (Pr = 0.71) when compared to gas value (Pr = 6.2).” The Prandtl number Pr = 6.2 corresponds to water not to gas (air).

Reference

1.
Tarakaramu
,
N.
,
Sivakumar
,
N.
,
Narayana
,
P. V. S.
, and
Sivajothi
,
R.
,
2022
, “
Viscous Dissipation and Joule Heating Effects on 3D Magnetohydrodynamics Flow of Williamson Nanofluid in a Porous Medium Over a Stretching Surface With Melting Condition
,”
ASME Open J. Eng.
,
1
, p.
011033
.