... of the pressure in the tanks are most reliably obtained by experiments. Very localized pressures may be important for the structural response of the tank containment system. Moreover, the typical pressure time history duration is similar to the structural natural frequency. Therefore, pressure measurements need...

... analysis internal stresses stress-strain relations structural engineering tanks (containers) welds residual stress shakedown fatigue assessment welded joint hot-spot stress Marine structures like ship hulls and offshore oil platforms are in general designed for a finite fatigue life...

... fatigue fatigue testing sloshing tanks (containers) thermal insulation cryogenic fatigue fatigue strength Mark-III membrane system LNG carriers insulation system S-N curves MARK III and NO 96 types are the most common membrane-type LNG insulation systems employed for LNG carriers...

..., and (3) to discuss possible ways for further improvement of knowledge about the variability of still water loads during real ships’ operation. 05 08 2009 29 04 2010 01 04 2011 01 04 2011 bending goods distribution statistical analysis tanks (containers) Weibull...

.... 10 06 2009 27 09 2010 30 03 2011 30 03 2011 beams (structures) elastic constants internal stresses ships tanks (containers) yield strength A ship hull girder is a complex assembly of unstiffened/stiffened plates, frames, etc. and is subjected to longitudinal...

... LNG tank scaling finite element analysis natural gas technology plates (structures) sloshing steel supports tanks (containers) 18 05 2009 25 09 2009 06 12 2010 06 12 2010 In the dynamic analysis, the damping level may play an important role. As mentioned...

...-9048-7 03 07 2008 20 06 2009 10 03 2010 10 03 2010 compressive strength compressive testing glass fibre reinforced composites hydraulic motors natural gas technology polymer foams tanks (containers) thermal insulation viscoelasticity Young's modulus...

... tanks (containers) 30 08 2007 08 09 2008 01 03 2010 01 03 2010 2010 American Society of Mechanical Engineers ...

... Platforms With Mooring Lines in Side-by-Side Offloading Operation ,” Appl. Ocean Res. , 27 , pp. 292 – 310 . 10.1016/j.apor.2006.02.001 0141-1187 24 06 2008 17 03 2009 01 10 2009 loading loading equipment tanks (containers) unloading Nowadays, the single point...

... at the sea bottom KT earthquake spectrum (spectrum of ground acceleration) 20 03 2007 14 08 2007 18 07 2008 earthquake engineering finite element analysis fluid dynamics modal analysis stochastic processes tanks (containers) underwater equipment Large energy...

.... fluid oscillations tanks (containers) water waves 01 07 2004 07 02 2008 11 07 2008 Figure 9 shows the comparison between the model tests and the numerical analysis at a cylinder depth of 1.67 ft . The experimental results give a different resonant frequency in Fig...

... because measurements of wave profile in such facilities can be more precise than in full scale and parameters of the generated sea states can be controlled and repeated if necessary. ocean waves offshore installations statistical analysis tanks (containers) 01 11 2006 17 04 2007...

... ocean waves offshore installations risk analysis shipbuilding industry storage tanks (containers) In recent years, terms such as freak wave, rogue wave, or monsters of the deep could often been read in newspapers or heard in radio and television. The public is more sensitized to extreme...

..., who assisted us in the accomplishment of this study. ships marine engineering design engineering tanks (containers) bending bending strength tanker structures bulk carrier structures container ship structures strength assessment design sea states design regular waves design loads...

... Vibrated Granular Materials, Part I: Collective Processes ,” Commun. Nonlinear Sci. Numer. Simul. 1007-5704 , 12 , pp. 254 – 272 . 09 02 2006 04 08 2006 flow simulation tanks (containers) chemical engineering mixing turbulence impellers blades viscoelasticity mechanical...

... for the reliability assessment of different plate elements. 21 07 2005 16 02 2006 corrosion plates (structures) tanks (containers) ships Corrosion is one of the most critical degrading mechanisms of the structural strength of ships and offshore structures. Various theoretical approaches...

... sloshing fluid oscillations tanks (containers) structural engineering design engineering Weibull distribution Pareto distribution LNG sloshing probability pressure experiments structural response Growing global energy consumption and an increasing use of natural gas as compared...

... by a duct. The sealed tank is simply a rectangular tank sealed at the top to prevent overflow. Galerkin method finite element analysis Runge-Kutta methods sloshing fluid oscillations tanks (containers) flow instability water waves 20 04 2004 25 05 2005 2006 American...

... simulation stratified flow water waves viscosity numerical analysis tanks (containers) Relatively recently, a review of many of the practical problems in engineering in which free-surface sloshing plays a role was published by Ibrahim et al. ( 1 ). If such tanks are exposed to the environment...

..., buckling repeatedly occurred under the action of the cyclic wave loads. Plastic deformation accumulated and eventually cracks appeared. corrosion ageing reliability design maintenance engineering thickness measurement tanks (containers) probability inspection ships structural engineering...