The VariLeg is an exoskeleton allowing a paraplegic to walk. It was used for competing on an obstacle course at the first Cybathlon. It integrates an adjustable stiffness in the knee joint to improve the walking performance. However, the adjustable stiffness mechanism (ASM) of the VariLeg is bulky and heavy, which hampers the handling of the exoskeleton. Hence, the choice of an ASM concept that only needs small springs is essential. This study benchmarks six state-of-the-art ASMs regarding their needed energy storage capacity, thus their potential for a high compactness. The benchmark is performed with the requirements of the VariLeg and a second requirements set, which can be fulfilled by all six ASMs. The benchmark can be transferred to other requirements as well. It is based on models of the ASMs with their design parameters optimized for the given requirements set. The benchmark reveals large differences between the performances of the investigated ASM concepts of up to a factor of five in the energy storage capacity. This compactness benchmark is a useful design tool to choose a suitable mechanism to realize a compact implementation. More compact ASMs will improve the handling of assistive robots with a physically adjustable stiffness, such as the VariLeg, to support handicapped people in everyday life.
Skip Nav Destination
Article navigation
October 2017
Research-Article
Benchmark of the Compactness Potential of Adjustable Stiffness Mechanisms
Marius Stücheli,
Marius Stücheli
Product Development Group Zurich,
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: marius.stuecheli@alumni.ethz.ch
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: marius.stuecheli@alumni.ethz.ch
Search for other works by this author on:
Marianne Schmid Daners,
Marianne Schmid Daners
Product Development Group Zurich,
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: marischm@ethz.ch
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: marischm@ethz.ch
Search for other works by this author on:
Mirko Meboldt
Mirko Meboldt
Professor
Product Development Group Zurich,
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: meboldtm@ethz.ch
Product Development Group Zurich,
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: meboldtm@ethz.ch
Search for other works by this author on:
Marius Stücheli
Product Development Group Zurich,
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: marius.stuecheli@alumni.ethz.ch
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: marius.stuecheli@alumni.ethz.ch
Marianne Schmid Daners
Product Development Group Zurich,
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: marischm@ethz.ch
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: marischm@ethz.ch
Mirko Meboldt
Professor
Product Development Group Zurich,
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: meboldtm@ethz.ch
Product Development Group Zurich,
Department of Mechanical
and Process Engineering,
ETH Zurich,
Zurich 8092, Switzerland
e-mail: meboldtm@ethz.ch
1Corresponding author.
Manuscript received December 20, 2016; final manuscript received May 7, 2017; published online August 8, 2017. Assoc. Editor: Marcia K. O'Malley.
J. Mechanisms Robotics. Oct 2017, 9(5): 051009 (13 pages)
Published Online: August 8, 2017
Article history
Received:
December 20, 2016
Revised:
May 7, 2017
Citation
Stücheli, M., Daners, M. S., and Meboldt, M. (August 8, 2017). "Benchmark of the Compactness Potential of Adjustable Stiffness Mechanisms." ASME. J. Mechanisms Robotics. October 2017; 9(5): 051009. https://doi.org/10.1115/1.4037114
Download citation file:
Get Email Alerts
Cited By
Design of Rolling Motion for Snake-like Robots using Center-of-Gravity (COG) Shift
J. Mechanisms Robotics
Modelling and Control of Cable Driven Exoskeleton for Arm Rehabilitation
J. Mechanisms Robotics
Related Articles
Energy-Optimal Hopping in Parallel and Series Elastic One-Dimensional Monopeds
J. Mechanisms Robotics (June,2018)
A Compact, Modular Series Elastic Actuator
J. Mechanisms Robotics (August,2016)
A Model for Multi-Input Mechanical Advantage in Origami-Based Mechanisms
J. Mechanisms Robotics (December,2018)
Development of n -DoF Preloaded Structures for Impact Mitigation in Cobots
J. Mechanisms Robotics (October,2018)
Related Proceedings Papers
Related Chapters
Backlash
Design and Application of the Worm Gear
Understanding the Problem
Design and Application of the Worm Gear
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution