A novel parallel robot, dubbed the SDelta, is the subject of this paper. SDelta is a simpler alternative to both the well-known Stewart–Gough platform (SGP) and current three-limb, full-mobility parallel robots, as it contains fewer components and all its motors are located on the base. This reduces the inertial load on the system, making it a good candidate for high-speed operations. SDelta features a symmetric structure; its forward-displacement analysis leads to a system of three quadratic equations in three unknowns, which admits up to eight solutions, or half the number of those admitted by the SGP. The kinematic analysis, undertaken with a geometrical method based on screw theory, leads to two Jacobian matrices, whose singularity conditions are investigated. Instead of using the determinant of a 6 × 6 matrix, we derive one simple expression that characterizes the singularity condition. This approach is also applicable to a large number of parallel robots whose six actuation wrench axes intersect pairwise, such as all three-limb parallel robots whose limbs include, each, a passive spherical joint. The workspace is analyzed via a geometric method, while the dexterity analysis is conducted via discretization. Both show that the given robot has the potential to offer both large workspace and good dexterity with a proper choice of design variables.
Issue Section:
Research Papers
References
1.
Kong
, X.
, and Gosselin
, C.
, 2007
, Type Synthesis of Parallel Mechanisms
, Vol. 33
, Springer
, Berlin.2.
Merlet
, J.-P.
, 2006
, Parallel Robots
, Vol. 128
, Springer, Dordrecht, The Netherlands.3.
Briot
, S.
, and Khalil
, W.
, 2015
, Dynamics of Parallel Robots
, Springer
, Cham, Switzerland.4.
Stewart
, D.
, 1965
, “A Platform With Six Degrees of Freedom
,” Proc. Inst. Mech. Eng.
, 180
(1
), pp. 371
–386
.5.
Fichter
, F.
, 1986
, “A Stewart Platform-Based Manipulator—General-Theory and Practical Construction
,” Int. J. Rob. Res.
, 5
(2
), pp. 157
–182
.6.
Podhorodeski
, R. P.
, and Pittens
, K. H.
, 1994
, “A Class of Parallel Manipulators Based on Kinematically Simple Branches
,” ASME J. Mech. Des.
, 116
(3
), pp. 908
–914
.7.
Yang
, G.
, Chen
, I. M.
, Chen
, W.
, and Lin
, W.
, 2004
, “Kinematic Design of a Six-DOF Parallel-Kinematics Machine With Decoupled-Motion Architecture
,” IEEE Trans. Rob.
, 20
(5
), pp. 876
–884
.8.
Behi
, F.
, 1988
, “Kinematic Analysis for a Six-Degree-of-Freedom 3-PRPS Parallel Mechanism
,” IEEE J. Rob. Autom.
, 4
(5
), pp. 561
–565
.9.
Kim
, J.
, Park
, F. C.
, Ryu
, S. J.
, Kim
, J.
, Hwang
, J. C.
, Park
, C.
, and Iurascu
, C. C.
, 2001
, “Design and Analysis of a Redundantly Actuated Parallel Mechanism for Rapid Machining
,” IEEE Trans. Rob. Autom.
, 17
(4
), pp. 423
–434
.10.
Sorli
, M.
, Ferraresi
, C.
, Kolarski
, M.
, Borovac
, B.
, and Vukobratovic
, M.
, 1997
, “Mechanics of Turin Parallel Robot
,” Mech. Mach. Theory
, 32
(1
), pp. 51
–77
.11.
Chen
, C.
, Gayral
, T.
, Caro
, S.
, Chablat
, D.
, Moroz
, G.
, and Abeywardena
, S.
, 2012
, “A Six Degree of Freedom Epicyclic-Parallel Manipulator
,” ASME J. Mech. Rob.
, 4
(4
), p. 041011
.12.
Liu
, X. J.
, and Wang
, J. S.
, 2003
, “Some New Parallel Mechanisms Containing the Planar Four-Bar Parallelogram
,” Int. J. Rob. Res.
, 22
(9
), pp. 717
–732
.13.
Monsarrat
, B.
, and Gosselin
, C. M.
, 2003
, “Workspace Analysis and Optimal Design of a 3-Leg 6-DOF Parallel Platform Mechanism
,” IEEE Trans. Rob. Autom.
, 19
(6
), pp. 954
–966
.14.
Jin
, Y.
, Chen
, I. M.
, and Yang
, G. L.
, 2009
, “Kinematic Design of a Family of 6-DOF Partially Decoupled Parallel Manipulators
,” Mech. Mach. Theory
, 44
(5
), pp. 912
–922
.15.
Azulay
, H.
, Mahmoodi
, M.
, Zhao
, R.
, Mills
, J. K.
, and Benhabib
, B.
, 2014
, “Comparative Analysis of a New 3xPPRS Parallel Kinematic Mechanism
,” Rob. Comput.-Integr. Manuf.
, 30
(4
), pp. 369
–378
.16.
Fu
, J.
, Gao
, F.
, Pan
, Y.
, and Du
, H.
, 2015
, “Forward Kinematics Solutions of a Special Six-Degree-of-Freedom Parallel Manipulator With Three Limbs
,” Adv. Mech. Eng.
, 7
(5
), pp. 1
–11
.17.
Wu
, Y. N.
, and Gosselin
, C. M.
, 2004
, “Synthesis of Reactionless Spatial 3-DOF and 6-DOF Mechanisms Without Separate Counter-Rotations
,” Int. J. Rob. Res.
, 23
(6
), pp. 625
–642
.18.
Wampler
, C.
, Morgan
, A.
, and Sommese
, A.
, 1990
, “Numerical Continuation Methods for Solving Polynomial Systems Arising in Kinematics
,” ASME J. Mech. Des.
, 112
(1
), pp. 59
–68
.19.
Faugère
, J.-C.
, and Lazard
, D.
, 1995
, “Combinatorial Classes of Parallel Manipulators
,” Mech. Mach. Theory
, 30
(6
), pp. 765
–776
.20.
Innocenti
, C.
, and Parenticastelli
, V.
, 1990
, “Direct Position Analysis of the Stewart Platform Mechanism
,” Mech. Mach. Theory
, 25
(6
), pp. 611
–621
.21.
Gan
, D.
, Dias
, J.
, and Seneviratne
, L.
, 2016
, “Unified Kinematics and Optimal Design of a 3RRPS Metamorphic Parallel Mechanism With a Reconfigurable Revolute Joint
,” Mech. Mach. Theory
, 96
(Pt. 2
), pp. 239
–254
.22.
Merlet
, J. P.
, 2004
, “Solving the Forward Kinematics of a Gough-Type Parallel Manipulator With Interval Analysis
,” Int. J. Rob. Res.
, 23
(3
), pp. 221
–235
.23.
Gibson
, C. G.
, and Hunt
, K. H.
, 1990
, “Geometry of Screw Systems—1. Screws—Genesis and Geometry
,” Mech. Mach. Theory
, 25
(1
), pp. 1
–10
.24.
Merlet
, J. P.
, 1989
, “Singular Configurations of Parallel Manipulators and Grassmann Geometry
,” Int. J. Rob. Res.
, 8
(5
), pp. 45
–56
.25.
Park
, F.
, and Kim
, J. W.
, 1999
, “Singularity Analysis of Closed Kinematic Chains
,” ASME J. Mech. Des.
, 121
(1
), pp. 32
–38
.26.
Zlatanov
, D.
, Fenton
, R. G.
, and Benhabib
, B.
, 1998
, “Identification and Classification of the Singular Configurations of Mechanisms
,” Mech. Mach. Theory
, 33
(6
), pp. 743
–760
.27.
Bohigas
, O.
, Zlatanov
, D.
, Ros
, L.
, Manubens
, M.
, and Porta
, J. M.
, and IEEE
, 2012
, “Numerical Computation of Manipulator Singularities
,” IEEE International Conference on Robotics and Automation
(ICRA
), Saint Paul, MN, May 14–18, pp. 1351
–1358
.28.
Wen
, J. T.
, and O’Brien
, J. F.
, 2003
, “Singularities in Three-Legged Platform-Type Parallel Mechanisms
,” IEEE Trans. Rob. Autom.
, 19
(4
), pp. 720
–726
.29.
Ben-Horin
, P.
, and Shoham
, M.
, 2006
, “Singularity Condition of Six-Degree-of-Freedom Three-Legged Parallel Robots Based on Grassmann–Cayley Algebra
,” IEEE Trans. Rob.
, 22
(4
), pp. 577
–590
.30.
Ben-Horin
, P.
, and Shoham
, M.
, 2006
, “Singularity Analysis of a Class of Parallel Robots Based on Grassmann–Cayley Algebra
,” Mech. Mach. Theory
, 41
(8
), pp. 958
–970
.31.
Kong
, X. W.
, and Gosselin
, C. M.
, 2001
, “Uncertainty Singularity Analysis of Parallel Manipulators Based on the Instability Analysis of Structures
,” Int. J. Rob. Res.
, 20
(11
), pp. 847
–856
.32.
Gosselin
, C.
, and Angeles
, J.
, 1990
, “Singularity Analysis of Closed-Loop Kinematic Chains
,” IEEE Trans. Rob. Autom.
, 6
(3
), pp. 281
–290
.33.
Bonev
, I. A.
, and Gosselin
, C. M.
, 2000
, “A Geometric Algorithm for the Computation of the Constant-Orientation Workspace of 6-RUS Parallel Manipulators
,” ASME
Paper No. DETC2000/MECH-14106.http://etsmtl.ca/professeurs/ibonev/documents/pdf/MECH_14106.pdf34.
Masory
, O.
, and Wang
, J.
, 1994
, “Workspace Evaluation of Stewart Platforms
,” Adv. Rob.
, 9
(4
), pp. 443
–461
.35.
Majid
, M. Z. A.
, Huang
, Z.
, and Yao
, Y. L.
, 2000
, “Workspace Analysis of a Six-Degrees of Freedom, Three-Prismatic-Prismatic-Spheric-Revolute Parallel Manipulator
,” Int. J. Adv. Manuf. Technol.
, 16
(6
), pp. 441
–449
.36.
Dash
, A. K.
, Chen
, I. M.
, Yeo
, S. H.
, and Yang
, G. L.
, 2005
, “Workspace Generation and Planning Singularity-Free Path for Parallel Manipulators
,” Mech. Mach. Theory
, 40
(7
), pp. 776
–805
.37.
Jo
, D. Y.
, and Haug
, E. J.
, 1989
, “Workspace Analysis of Closed Loop Mechanisms With Unilaterial Constraints
,” ASME Design Automation Conferences, Montreal, QC, Canada, Sept. 17–21, pp. 53
–60
.38.
Adkins
, F. A.
, and Haug
, E. J.
, 1997
, “Operational Envelope of a Spatial Stewart Platform
,” ASME J. Mech. Des.
, 119
(2
), pp. 330
–332
.39.
Haug
, E.
, Luh
, C.-M.
, Adkins
, F.
, and Wang
, J.-Y.
, 1996
, “Numerical Algorithms for Mapping Boundaries of Manipulator Workspaces
,” ASME J. Mech. Des.
, 118
(2
), pp. 228
–234
.40.
Merlet
, J. P.
, 1999
, “Determination of 6D Workspaces of Gough-Type Parallel Manipulator and Comparison Between Different Geometries
,” Int. J. Rob. Res.
, 18
(9
), pp. 902
–916
.41.
Patel
, S.
, and Sobh
, T.
, 2014
, “Manipulator Performance Measures—A Comprehensive Literature Survey
,” J. Intell. Rob. Syst.
, 77
(3–4
), pp. 547
–570
.42.
Moreno
, H. A.
, Saltaren
, R.
, Carrera
, I.
, Puglisi
, L.
, and Aracil
, R.
, 2012
, “Performance Indices for Robotic Manipulators: A Review of the State of the Art
,” Rev. Iberoam. Autom. Inf. Ind.
, 9
(2
), pp. 111
–122
.43.
Harada
, T.
, Friedlaender
, T.
, and Angeles
, J.
, 2014
, “The Development of an Innovative Two-DOF Cylindrical Drive: Design, Analysis and Preliminary Tests
,” IEEE International Conference on Robotics and Automation
(ICRA
), Hong Kong, China, May 31–June 7, pp. 6338
–6344
.44.
Nanua
, P.
, Waldron
, K. J.
, and Murthy
, V.
, 1990
, “Direct Kinematic Solution of a Stewart Platform
,” IEEE Trans. Rob. Autom.
, 6
(4
), pp. 438
–444
.45.
Hunt
, K. H.
, 1986
, “Special Configurations of Robot-Arms Via Screw Theory
,” Robotica
, 4
(3
), pp. 171
–179
.46.
Angeles
, J.
, 2014
, Fundamentals of Robotic Mechanical Systems. Theory, Methods, Algorithms
, 4th ed., Springer
, New York
.47.
Burdick
, J. W.
, 1995
, “A Classification of 3R Regional Manipulator Singularities and Geometries
,” Mech. Mach. Theory
, 30
(1
), pp. 71
–89
.48.
Notash
, L.
, 1998
, “Uncertainty Configurations of Parallel Manipulators
,” Mech. Mach. Theory
, 33
(1–2
), pp. 123
–138
.49.
Yang
, G.
, Chen
, I.-M.
, Lin
, W.
, and Angeles
, J.
, 2001
, “Singularity Analysis of Three-Legged Parallel Robots Based on Passive-Joint Velocities
,” IEEE Trans. Rob. Autom.
, 17
(4
), pp. 413
–422
.50.
Downing
, D. M.
, Samuel
, A. E.
, and Hunt
, K. H.
, 2002
, “Identification of the Special Configurations of the Octahedral Manipulator Using the Pure Condition
,” Int. J. Rob. Res.
, 21
(2
), pp. 147
–159
.51.
Ebert-Uphoff
, I.
, Lee
, J. K.
, and Lipkin
, H.
, 2002
, “Characteristic Tetrahedron of Wrench Singularities for Parallel Manipulators With Three Legs
,” Proc. Inst. Mech. Eng., Part C
, 216
(1
), pp. 81
–93
.52.
FarzanehKaloorazi
, M.
, Masouleh
, M. T.
, and Caro
, S.
, 2016
, “Collision-Free Workspace of Parallel Mechanisms Based on an Interval Analysis Approach
,” Robotica
, 1
(1
), pp. 1
–14
.53.
Angeles
, J.
, and López-Cajún
, C. S.
, 1992
, “Kinematic Isotropy and the Conditioning Index of Serial Robotic Manipulators
,” Int. J. Rob. Res.
, 11
(6
), pp. 560
–571
.54.
Zanganeh
, K. E.
, and Angeles
, J.
, 1997
, “Kinematic Isotropy and the Optimum Design of Parallel Manipulators
,” Int. J. Rob. Res.
, 16
(2
), pp. 185
–197
.Copyright © 2017 by ASME
You do not currently have access to this content.
