Variable stiffness and variable damping can play an important role in robot movement, particularly for legged robots such as bipedal walkers. Variable impedance also introduces new control problems, since there are more degrees of freedom to control, and the resulting robot has more complex dynamics. In this paper, we introduce novel design and fabrication methodologies that are capable of producing cost effective hardware prototypes suitable for investigating the efficacy of impedance modulation. We present two variable impedance bipedal platforms produced using a combination of waterjet cutting and 3D printing, and a novel fused deposition modeling (FDM) 3D printing based method for producing hybrid plastic/metal parts. We evaluate walking trajectories at different speeds and stiffness levels.
Skip Nav Destination
Article navigation
February 2016
Research-Article
Rapid Manufacture of Novel Variable Impedance Robots
Alexander Enoch,
Alexander Enoch
Institute of Perception,
Action and Behaviour,
School of Informatics,
University of Edinburgh,
Edinburgh EH8 9YL, UK
e-mail: a.m.enoch@sms.ed.ac.uk
Action and Behaviour,
School of Informatics,
University of Edinburgh,
Edinburgh EH8 9YL, UK
e-mail: a.m.enoch@sms.ed.ac.uk
Search for other works by this author on:
Sethu Vijayakumar
Sethu Vijayakumar
Institute of Perception,
Action and Behaviour,
School of Informatics,
University of Edinburgh,
Edinburgh EH8 9YL, UK
e-mail: sethu.vijayakumar@ed.ac.uk
Action and Behaviour,
School of Informatics,
University of Edinburgh,
Edinburgh EH8 9YL, UK
e-mail: sethu.vijayakumar@ed.ac.uk
Search for other works by this author on:
Alexander Enoch
Institute of Perception,
Action and Behaviour,
School of Informatics,
University of Edinburgh,
Edinburgh EH8 9YL, UK
e-mail: a.m.enoch@sms.ed.ac.uk
Action and Behaviour,
School of Informatics,
University of Edinburgh,
Edinburgh EH8 9YL, UK
e-mail: a.m.enoch@sms.ed.ac.uk
Sethu Vijayakumar
Institute of Perception,
Action and Behaviour,
School of Informatics,
University of Edinburgh,
Edinburgh EH8 9YL, UK
e-mail: sethu.vijayakumar@ed.ac.uk
Action and Behaviour,
School of Informatics,
University of Edinburgh,
Edinburgh EH8 9YL, UK
e-mail: sethu.vijayakumar@ed.ac.uk
Manuscript received August 1, 2014; final manuscript received April 8, 2015; published online August 18, 2015. Assoc. Editor: Aaron M. Dollar.
J. Mechanisms Robotics. Feb 2016, 8(1): 011003 (11 pages)
Published Online: August 18, 2015
Article history
Received:
August 1, 2014
Revision Received:
April 8, 2015
Citation
Enoch, A., and Vijayakumar, S. (August 18, 2015). "Rapid Manufacture of Novel Variable Impedance Robots." ASME. J. Mechanisms Robotics. February 2016; 8(1): 011003. https://doi.org/10.1115/1.4030388
Download citation file:
Get Email Alerts
Cited By
On the climbing ability of passively suspended tracked robots
J. Mechanisms Robotics
Uniform stretch behavior of creased units
J. Mechanisms Robotics
A Proportional Control Strategy for Stiffness Tuning of Parallel Manipulators
J. Mechanisms Robotics
Related Articles
Novel Design and Three-Dimensional Printing of Variable Stiffness Robotic Grippers
J. Mechanisms Robotics (December,2016)
Hybrid Deposition Manufacturing: Design Strategies for Multimaterial Mechanisms Via Three-Dimensional Printing and Material Deposition
J. Mechanisms Robotics (May,2015)
Integrated Manufacture of Exoskeletons and Sensing Structures for Folded Millirobots
J. Mechanisms Robotics (May,2015)
Cooperative Tool Path Planning for Wire Embedding on Additively Manufactured Curved Surfaces Using Robot Kinematics
J. Mechanisms Robotics (May,2015)
Related Proceedings Papers
Related Chapters
Design of Assembly Robot Controller Based on PROFI-BUS for Hubcap Gear-Box Pressure Assembling
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Novel and Efficient Mathematical and Computational Methods for the Analysis and Architecting of Ultralight Cellular Materials and their Macrostructural Responses
Advances in Computers and Information in Engineering Research, Volume 2
Data Base R&D for Unified Life Cycle Engineering
Computerization and Networking of Materials Data Bases