Design and other fundamental topics in engineering are often isolated to dedicated courses. An opportunity exists to foster a culture of engineering design and multidisciplinary problem solving throughout the curriculum. Designettes, charettelike design challenges, are rapid and creative learning tools that enable educators to integrate design learning in a single class, across courses, across terms, and across disciplines. When two or more courses join together in a designette, a multidisciplinary learning activity occurs; multiple subjects are integrated and applied to open-ended problems and grand challenges. This practice helps foster a culture of design, and enables the introduction of multidisciplinary design challenges. Studies at the Singapore University of Technology and Design (SUTD) demonstrate learning of engineering subject matter in a bio-inspired robotics designette (MechAnimal), an interactive musical circuit designette, and an automated milk delivery (AutoMilk) designette. Each challenge combines problem clarification, concept generation, and prototyping with subject content such as circuits, biology, thermodynamics, differential equations, or software with controls. From pre- and postsurveys of students, designettes are found to increase students' understanding of engineering concepts. From 321 third-semester students, designettes were found to increase students' perceptions of their ability to solve multidisciplinary problems.

Issue Section:
Design Education
Keywords:
Creativity, Design courses, Design education, Concept generation, Curricula
Topics:
Design, Students

References

1.
Wood
,
K. L.
,
Elara
,
M. R.
,
Kaijima
,
S.
,
Dritsas
,
S.
,
Frey
,
D.
,
White
,
C. K.
,
Jensen
,
D.
,
Crawford
,
R. H.
,
Moreno
,
D.
, and
Pey
,
K. L.
,
2012
, “
A Symphony of Designettes-Exploring the Boundaries of Design Thinking in Engineering Education
,” Paper No. AC2012-4004.
2.
Kober
,
N.
,
2014
,
Reaching Students: What Research Says About Effective Instruction in Undergraduate Science and Engineering
,
National Academies Press
,
Washington, DC
.
3.
Klukken
,
P.
,
Parsons
,
J. R.
, and
Columbus
,
P. J.
,
1997
, “
The Creative Experience in Engineering Practice: Implications for Engineering Education
,”
J. Eng. Educ.
,
86
(
2
), pp.
133
–
138
.
4.
Kazerounian
,
K.
, and
Foley
,
S.
,
2007
, “
Barriers to Creativity in Engineering Education: A Study of Instructors and Students Perceptions
,”
ASME J. Mech. Des.
,
129
(
7
), pp.
761
–
768
.
5.
Dym
,
C. L.
,
Agogino
,
A. M.
,
Eris
,
O.
,
Frey
,
D. D.
,
Leifer
,
L. J.
, and
College
,
H. M.
,
2005
, “
Engineering Design Thinking, Teaching, and Learning
,”
J. Eng. Educ.
,
94
(
1
), pp.
103
–
120
.
6.
McMasters
,
J.
,
2004
, “
Influencing Engineering Education: One (Aerospace) Industry Perspective
,”
Int. J. Eng. Educ.
,
20
(
3
), pp.
353
–
371
.
7.
Bilén
,
S. G.
,
Devon
,
R. F.
, and
Okudan
,
G. E.
,
2002
, “
Core Curriculum and Methods in Teaching Global Product Development
,”
International Conference on Engineering Education
, pp.
1
–
6
.
8.
Bright
,
A.
, and
Phillips
,
J.
,
1999
, “
The Harvey Mudd Engineering Clinic Past, Present, Future
,”
J. Eng. Educ.
,
88
(
2
), pp.
189
–
194
.
9.
Aglan
,
H. A.
, and
Ali
,
S. F.
,
1996
, “
Hands-On Experiences: An Integral Part of Engineering Curriculum Reform
,”
J. Eng. Educ.
,
85
(
4
), pp.
327
–
330
.
10.
Koen
,
B. V.
,
2013
, “
Debunking Contemporary Myths Concerning Engineering
,”
Philosophy and Engineering: Reflections on Practice, Principles and Process
,
D. P.
Michelfelder
, N. McCarthy, and
D. E.
Goldberg
, eds.,
Springer, Dordrecht
,
The Netherlands
, pp.
115
–
137
.
11.
Koen
,
B. V.
,
2013
, “
Debunking Contemporary Myths Concerning Engineering
,”
Philos. Eng. Technol.
,
15
, pp.
115
–
137
.
12.
Ahmed
,
S.
,
2007
, “
An Industrial Case Study: Identification of Competencies of Design Engineers
,”
ASME J. Mech. Des.
,
129
(
7
), pp.
709
–
716
.
13.
Dym
,
C. L.
, and
College
,
H. M.
,
1994
, “
Teaching Design to Freshmen: Style and Content
,”
J. Eng. Educ.
,
83
(
4
), pp.
303
–
310
.
14.
Nielsen
,
J. D.
,
Du
,
X. Y.
, and
Kolmos
,
A.
,
2010
, “
Innovative Application of a New PBL Model to Interdisciplinary and Intercultural Projects
,”
Int. J. Electr. Eng. Educ.
,
47
(
2
), pp.
174
–
188
.
15.
Heitmann
,
G.
,
1996
, “
Project-Oriented Study and Project-Organized Curricula: A Brief Review of Intentions and Solutions
,”
Eur. J. Eng. Educ.
,
21
(
2
), pp.
121
–
131
.
16.
Bailey
,
R.
,
2006
, “
Effects of Industrial Experience and Coursework During Sophomore and Junior Years on Student Learning of Engineering Design
,”
ASME J. Mech. Des.
,
129
(
7
), pp.
662
–
667
.
17.
Otto
,
K.
,
Camburn
,
B.
,
Wood
,
K.
,
Bouffanais
,
R.
,
Kyoseva
,
E.
,
Yee
,
L. H.
,
Poletti
,
D.
,
Simpson
,
R.
,
Nannicini
,
G.
, and
Yong
,
J.
,
2014
, “
Integrated 2D Design in the Curriculum: Effectiveness of Cross-Subject Engineering Challenges
,”
ASEE Annual Conference
, p.
24.763
.
18.
Bloom
,
B. S.
,
1984
,
Taxonomy of Educational Objectives Book 1: Cognitive Domain
,
Addison Wesley Publishing Company
,
White Plains, NY
.
19.
Anderson
,
L. W.
,
Krathwohl
,
D. R.
,
Airasian
,
P. W.
,
Cruikshank
,
K. A.
,
Mayer
,
R. E.
,
Pintrich
,
P. R.
,
Raths
,
J.
, and
Wittrock
,
M. C.
,
2000
,
A Taxonomy for Learning, Teaching, and Assessing: A Revision of Bloom's Taxonomy of Educational Objectives
,
Abridged Edition/Pearson
,
New York
.
20.
Anderson
,
L.
, and
Northwood
,
D.
,
2002
, “
Recruitment and Retention Programs to Increase Diversity in Engineering
,”
International Conference on Engineering Education
,
Manchester, UK
, pp.
1
–
5
.
21.
National Research Council
,
2000
,
How People Learn: Brain, Mind, Experience, and School: Expanded Edition
,
The National Academies Press
,
Washington, DC
.
22.
Calabro
,
K.
,
Kiger
,
K.
,
Lawson
,
W.
, and
Zhang
,
G.
,
2008
, “
New Directions in Freshman Engineering Design at the University of Maryland
,”
ASEE/IEEE
Frontiers in Education Conference
,
Saratoga Springs, NY, Oct. 22–25
, pp. T2D:
6
–
11
.
23.
Prince
,
M.
,
2004
, “
Does Active Learning Work? A Review of the Research
,”
J. Eng. Educ.
,
93
(
3
), pp.
223
–
231
.
24.
Laws
,
P. W.
,
1997
, “
Millikan Lecture 1996: Promoting Active Learning Based on Physics Education Research in Introductory Physics Courses
,”
Am. J. Phys.
,
65
(
1
), p.
14
.
25.
Heller
,
P.
,
1992
, “
Teaching Problem Solving Through Cooperative Grouping. Part 2: Designing Problems and Structuring Groups
,”
Am. J. Phys.
,
60
(
7
), p.
637
.
26.
Heller
,
P.
,
1992
, “
Teaching Problem Solving Through Cooperative Grouping. Part 1: Group Versus Individual Problem Solving
,”
Am. J. Phys.
,
60
(
7
), p.
627
.
27.
Hake
,
R. R.
,
1992
, “
Socratic Pedagogy in the Introductory Physics Laboratory
,”
Phys. Teach.
,
30
(
9
), p.
546
.
28.
Hake
,
R. R.
,
1987
, “
Promoting Student Crossover to the Newtonian World
,”
Am. J. Phys.
,
55
(
10
), p.
878
.
29.
Sokoloff
,
D. D. R.
, and
Thornton
,
R. R. K.
,
1997
, “
Using Interactive Lecture Demonstrations to Create an Active Learning Environment
,”
AIP
Conference Proceedings, College Park, MD, pp.
1061
–
1074
.
30.
Mazur
,
E.
,
1997
,
Peer Instruction: A User's Manual
,
Prentice-Hall, Upper Saddle River
,
NJ
.
31.
Holzer
,
S. M.
, and
Andruet
,
R. H.
,
2000
, “
Experiential Learning in Mechanics With Multimedia
,”
Int. J. Eng. Educ.
,
16
(
5
), pp.
372
–
384
.
32.
Linsey
,
J.
,
Talley
,
A.
,
White
,
C.
,
Jensen
,
D.
, and
Wood
,
K.
,
2009
, “
From Tootsie Rolls to Broken Bones: An Innovative Approach for Active Learning in Mechanics of Materials
,”
Adv. Eng. Educ.
,
1
(
3
), pp.
1
–
23
.
33.
Linsey
,
J.
,
Talley
,
A.
,
Jensen
,
D.
,
Wood
,
K.
,
Kathy
,
S.
,
Kuhr
,
R.
, and
Eways
,
S.
,
2007
, “
From Tootsie Rolls to Composites: Assessing a Spectrum of Active Learning Activities in Engineering Mechanics
,”
ASEE Annual Conference
,
Honolulu, HI
, pp.
12.770.1
–
12.770.27
.
34.
Linsey
,
J.
,
Cobb
,
B.
,
Academy
,
U. S. A. F.
,
Jensen
,
D.
,
Wood
,
K.
, and
Eways
,
S.
,
2006
, “
Methodology and Tools for Developing Hands-on Active Learning Activities
,”
ASEE Annual Conference
,
Chicago, IL
, pp.
11.927.1
–
11.927.31
.
35.
Bean
,
J. C.
,
2011
,
Engaging Ideas: The Professor's Guide to Integrating Writing, Critical Thinking, and Active Learning in the Classroom
,
Jossey-Bass
, San Francisco.
36.
Felder
,
R. M. R.
, and
Brent
,
R.
,
2005
, “
Understanding Student Differences
,”
J. Eng. Educ.
,
94
(
1
), pp.
57
–
72
.
37.
Heuvelen
,
A. V.
, and
Maloney
,
D.
,
1999
, “
Playing Physics Jeopardy
,”
Am. J. Phys.
,
67
(
3
), pp.
252
–
256
.
38.
Felder
,
R. M.
,
Felder
,
G. N.
,
Mauney
,
M.
,
Hamrin
,
C. E.
,
Dietz
,
E. J.
, and
Education
,
E.
,
1995
, “
A Longitudinal Study of Engineering Student Performance and Retention. V. Comparisons With Traditionally-Taught Students
,”
J. Eng. Educ.
,
84
(
4
), pp.
469
–
480
.
39.
Hake
,
R. R.
,
1998
, “
Interactive-Engagement Versus Traditional Methods: A Six-Thousand-Student Survey of Mechanics Test Data for Introductory Physics Courses
,”
Am. J. Phys.
,
66
(
1
), p.
64
.
40.
Jensen
,
D.
,
Wood
,
J.
, and
Wood
,
K.
,
2003
, “
Enhancing Mechanical Engineering Curriculum Through the Use of Hands-on Activities, Interactive Multimedia and Tools to Improve Team Dynamics
,”
Int. J. Eng. Educ.
,
19
(
6
), pp.
874
–
884
.
41.
Linsey
,
J.
,
Talley
,
A.
,
Wood
,
K. L.
,
Jensen
,
D.
, and
Schmidt
,
K.
,
2008
, “
PHLIpS for Active Learning
,”
ASEE Annual Conference
,
Pittsburgh, PA
, pp.
13.979.1
–
13.979.10
.
42.
Dalrymple
,
O. O.
,
Sears
,
D. A.
, and
Evangelou
,
D.
,
2011
, “
The Motivational and Transfer Potential of Disassemble/Analyze/Assemble Activities
,”
J. Eng. Educ.
,
100
(
4
), pp.
741
–
759
.
43.
Lewis
,
K.
,
Moore-Russo
,
D. A.
,
Kremer
,
G. E. O.
,
Tucker
,
C.
,
Simpson
,
T. W.
,
Zappe
,
S. E.
,
McKenna
,
A. F.
,
Carberry
,
A. R.
,
Chen
,
W.
,
Gatchell
,
D. W.
,
Shooter
,
S. B.
,
Paretti
,
M. C.
,
McNair
,
L. D.
, and
Williams
,
C.
,
2013
, “
The Development of Product Archaeology as a Platform for Contextualizing Engineering Design
,”
ASEE Annual Conference & Exposition
,
Atlanta, GA
, pp.
23.1186.1
–
23.1186.17
.
44.
Daly
,
S. R.
,
Mosyjowski
,
E. A.
, and
Seifert
,
C. M.
,
2014
, “
Teaching Creativity in Engineering Courses
,”
J. Eng. Educ.
,
103
(
3
), pp.
417
–
449
.
45.
Roedel
,
R.
,
Doak
,
B.
,
Politano
,
M.
,
Duerden
,
S.
,
Green
,
M.
,
Linder
,
D.
, and
Evans
,
D.
,
1995
, “
An Integrated, Project-Based, Introductory Course in Calculus, Physics, English, and Engineering
,”
Frontiers in Education Conference
,
Atlanta, GA
, pp.
1
–
6
.
46.
Beaudoin
,
D. L.
, and
Llis
,
D. F. O.
,
1995
, “
A Product and Process Engineering Laboratory for Freshmen
,”
J. Eng. Educ.
,
84
(
3
), pp.
279
–
284
.
47.
Kadlowec
,
J.
,
Bhatia
,
K.
,
Chandrupatla
,
T. R.
,
Chen
,
J. C.
,
Constans
,
E.
,
Hartman
,
H.
,
Marchese
,
A. J.
,
von Lockette
,
P.
, and
Zhang
,
H.
,
2007
, “
Design Integrated in the Mechanical Engineering Curriculum: Assessment of the Engineering Clinics
,”
ASME J. Mech. Des.
,
129
(
7
), pp.
682
–
691
.
48.
Chesler
,
N. C.
,
D'Angelo
,
C. M.
,
Arastoopour
,
G.
, and
Shaffer
,
D. W.
,
2011
, “
Use of Professional Practice Simulation in a First-Year Introduction Engineering Course
,”
ASEE Annual Conference
,
Vancouver, BC
, pp.
22.15851
–
22.1585.9
.
49.
Otto
,
K.
, and
Wood
,
K.
,
1998
, “
Product Evolution: A Reverse Engineering and Redesign Methodology
,”
Res. Eng. Des.
,
10
(
4
), pp.
226
–
243
.
50.
Wood
,
K.
,
Jensen
,
D.
,
Bezdek
,
J.
, and
Otto
,
K.
,
2001
, “
Reverse Engineering and Redesign: Courses to Incrementally and Systematically Teach Design
,”
J. Eng. Educ.
,
90
(
3
), pp.
363
–
374
.
51.
Wood
,
J.
, and
Campbell
,
M.
,
2005
, “
Enhancing the Teaching of Machine Design by Creating a Basic Hands-on Environment With Mechanical ‘Breadboards'
,”
Int. J. Mech. Eng. Educ.
,
33
(
1
), pp.
1
–
25
.
52.
Otto
,
K.
,
Wood
,
K.
,
Bezdek
,
J.
,
Murphy
,
M.
, and
Jensen
,
D.
,
1998
, “
Building Better Mousetrap Builders: Courses to Incrementally and Systematically Teach Design
,”
ASEE Annual Conference
,
Seattle, WA
, pp.
3.129.1
–
3.129.21
.
53.
Aikens
,
M.
,
Brown
,
S.
,
Castañeda-Emenaker
,
I.
,
French
,
D.
,
French
,
M.
,
Hauze
,
S.
,
Murphy
,
K.
,
Rave
,
S.
,
Singer
,
T.
, and
Chang
,
N. W.
,
2013
, “
Guitar Building
,” accessed Feb. 20, 2014, http://www.guitarbuilding.org/bios/
54.
Hussmann
,
S.
, and
Jensen
,
D.
,
2007
, “
Crazy Car Race Contest: Multicourse Design Curricula in Embedded System Design
,”
IEEE Trans. Educ.
,
50
(
1
), pp.
61
–
67
.
55.
Engineering Accreditation Commission
,
2013
,
Criteria for Accrediting Engineering Programs Effective for Reviews During the 2014-2015 Accreditation Cycle
, ABET, Baltimore.
56.
Crismond
,
D. P.
, and
Adams
,
R. S.
,
2012
, “
The Informed Design Teaching and Learning Matrix
,”
J. Eng. Educ.
,
101
(
4
), pp.
738
–
797
.
57.
Box
,
G.
, and
Liu
,
P.
,
1999
, “
Statistics as a Catalyst to Learning by Scientific Method Part I-An Example
,”
J. Qual. Technol.
,
31
(
1
), pp.
1
–
15
.
58.
Watson
,
W.
,
Kumar
,
K.
, and
Michaelsen
,
L.
,
1993
, “
Cultural Diversity's Impact on Interaction Process and Performance: Comparing Homogeneous and Diverse Task Groups
,”
Acad. Manage. J.
,
36
(
3
), pp.
590
–
602
.
59.
Ogot
,
M.
,
Okudan
,
G.
,
Simpson
,
T. W.
, and
Lamancusa
,
J. S.
,
2008
, “
A Framework for Classifying Disassemble/Analyse/Assemble Activities in Engineering Design Education
,”
J. Des. Res.
,
7
(
2
), pp.
120
–
135
.
60.
Foster
,
G.
,
Holland
,
M.
,
Ferguson
,
S.
, and
Deluca
,
W.
,
2012
, “
The Creation of Design Modules for Use in Engineering Design Education
,”
ASME
Paper No. DETC2012-71181.
61.
Linnerud
,
B.
, and
Mocko
,
G.
,
2013
, “
Factors That Effect Motivation and Performance on Innovative Design Projects
,”
ASME
Paper No. DETC2013-12758.
62.
White
,
C.
,
Crawford
,
R. H.
,
Wood
,
K.
, and
Talley
,
A.
,
2010
, “
Influences and Interests in Humanitarian Engineering
,”
ASEE Global Colloquium on Engineering Education
,
Singapore
, pp.
15.733.1
–
15.733.13
.
63.
Kolb
,
D. A.
,
1983
,
Experiential Learning: Experience as the Source of Learning and Development
,
Prentice Hall
,
Upper Saddl River
,
NJ
.
64.
Keefe
,
M.
,
Glancey
,
J.
, and
Cloud
,
N.
,
2007
, “
Assessing Student Team Performance in Industry Sponsored Design Projects
,”
ASME J. Mech. Des.
,
129
(
7
), pp.
692
–
700
.
65.
Pajares
,
F.
,
1996
, “
Self-Efficacy Beliefs in Academic Settings
,”
Rev. Educ. Res.
,
66
(
4
), pp.
543
–
578
.
66.
Groot
,
D.
,
Carberry
,
A. R.
,
Lee
,
H.-S.
, and
Ohland
,
M. W.
,
2010
, “
Measuring Engineering Design Self-Efficacy
,”
J. Eng. Educ.
,
99
(
1
), pp.
71
–
79
.
67.
Beghetto
,
R.
,
Kaufman
,
J.
, and
Baxter
,
J.
,
2011
, “
Answering the Unexpected Questions: Exploring the Relationship Between Students' Creative Self-Efficacy and Teacher Ratings of Creativity
,”
Psychol. Aesthetics, Creativity Arts
,
5
(
4
), pp.
342
–
349
.
68.
Olds
,
B. M.
,
Moskal
,
B. M.
, and
Miller
,
R. L.
,
2005
, “
Assessment in Engineering Education: Evolution, Approaches and Future
,”
J. Eng. Educ.
,
94
(
1
), pp.
13
–
25
.
69.
Chan
,
J.
,
Fu
,
K.
,
Schunn
,
C.
,
Cagan
,
J.
,
Wood
,
K.
, and
Kotovsky
,
K.
,
2011
, “
On the Benefits and Pitfalls of Analogies for Innovative Design: Ideation Performance Based on Analogical Distance, Commonness, and Modality of Examples
,”
ASME J. Mech. Des.
,
133
(
8
), p.
081004
.
70.
Markman
,
A. B.
,
Wood
,
K. L.
,
Linsey
,
J. S.
,
Murphy
,
J. T.
, and
Laux
,
J. P.
,
2009
, “
Supporting Innovation by Promoting Analogical Reasoning
,”
Tools for Innovation
,
A. B.
Markman
, and
K. L.
Wood
, eds.,
Oxford University Press
,
New York
, pp.
85
–
103
.
71.
Lee
,
Y.
,
Gero
,
J.
, and
Williams
,
C.
,
2012
, “
Exploring the Effect of Design Education on the Design Cognition of Two Engineering Majors
,”
ASME
Paper No. DETC2012-71218.
Copyright © 2016 by ASME
You do not currently have access to this content.