Skip Nav Destination
Issues
January 2016
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Research Papers
Incorporating Density and Temperature in the Stretched Exponential Model for Predicting Stress Relaxation Behavior of Polymer Foams
J. Eng. Mater. Technol. January 2016, 138(1): 011001.
doi: https://doi.org/10.1115/1.4031426
Topics:
Density
,
Relaxation (Physics)
,
Stress
,
Temperature
,
Polymer foams
Experimental Assessment of High Damping Rubber Under Combined Compression and Shear
J. Eng. Mater. Technol. January 2016, 138(1): 011002.
doi: https://doi.org/10.1115/1.4031427
Topics:
Bearings
,
Compression
,
Compressive stress
,
Damping
,
Rubber
,
Shear (Mechanics)
,
Stress
,
Shear modulus
,
Shapes
,
Deformation
Comparison of Static and Dynamic Powder Compaction: Experiment and Simulation
J. Eng. Mater. Technol. January 2016, 138(1): 011003.
doi: https://doi.org/10.1115/1.4031615
Topics:
Compacting
,
Copper
,
Density
,
Engineering simulation
,
Simulation
,
Stress
,
Temperature
,
Pressure
,
Particulate matter
,
Shock (Mechanics)
Predicting the Peen Forming Effectiveness of Ti-6Al-4V Strips With Different Thicknesses Using Realistic Finite Element Simulations
J. Eng. Mater. Technol. January 2016, 138(1): 011004.
doi: https://doi.org/10.1115/1.4031830
Asymmetric Postbuckling Behavior of Hemispherical Shell Structure Under Axial Compression
J. Eng. Mater. Technol. January 2016, 138(1): 011005.
doi: https://doi.org/10.1115/1.4031960
Topics:
Compression
,
Deformation
,
Displacement
,
Hinges
,
Shells
Importance of Bonding Atmosphere for Mechanical Reliability of Reactively Bonded Solder Joints
J. Eng. Mater. Technol. January 2016, 138(1): 011006.
doi: https://doi.org/10.1115/1.4032020
Topics:
Bonding
,
Fracture (Materials)
,
Fracture (Process)
,
Fracture toughness
,
Pressure
,
Reliability
,
Solder joints
,
Solders
,
Stress
,
Vacuum
Effect of Geometrical Discontinuities on Strain Distribution for Orthotropic Laminates Under Biaxial Loading
J. Eng. Mater. Technol. January 2016, 138(1): 011007.
doi: https://doi.org/10.1115/1.4032004
Topics:
Anisotropy
,
Composite materials
,
Failure
,
Fracture (Process)
,
Gages
,
Geometry
,
Laminates
,
Numerical analysis
,
Splines
,
Stress
Technical Brief
Bending Stresses in Triangular Auxetic Plates
J. Eng. Mater. Technol. January 2016, 138(1): 014501.
doi: https://doi.org/10.1115/1.4031665
Topics:
Bending (Stress)
,
Plates (structures)
,
Stress
,
Poisson ratio
Plastic Zone Size at Sharp Indentation of Classical Elastic–Plastic Materials: Behavior at Ideally Plastic Hardening
J. Eng. Mater. Technol. January 2016, 138(1): 014502.
doi: https://doi.org/10.1115/1.4031736
Topics:
Finite element methods
,
Hardening
,
Plastics
,
Numerical analysis
,
Work hardening
,
Mechanical behavior
Email alerts
RSS Feeds
Multiphysics Simulations of Microwave Induced Damage Applied to Rock Samples of Varying Strength and Absorptivity
J. Eng. Mater. Technol (July 2023)
Creation of a Life Prediction Model for Combined High-Cycle Fatigue and Creep
J. Eng. Mater. Technol (July 2023)
XFEM Analysis of Strain Rate Dependent Mechanical Properties of Additively Manufactured 17-4 Precipitation Hardening Stainless Steel
J. Eng. Mater. Technol (July 2023)
A Finite Volume Framework for the Simulation of Additive Friction Stir Deposition
J. Eng. Mater. Technol (July 2023)
