For a perforated sheet with circular holes, used in shadow masks, the diameter of the circular hole varies through the thickness, and the nonuniform circular holes are arranged in a triangular pattern. In order to simplify the analysis, a perforated sheet with equivalent circular holes of uniform diameter is proposed such that its plastic behavior is similar to that with the given nonuniform circular holes. In this study, a yield criterion is discussed for the perforated sheet with uniform circular holes by employing an equivalent continuum approach, which is then applied to examine the plastic deformation of the perforated sheet with nonuniform circular holes. The analytical results predicted by the theory, including those for the apparent yield stresses and strain ratios, are verified by the results obtained from the finite element analysis and also from experiments.
Skip Nav Destination
e-mail: fkchen@w3.me.ntu.edu.tw
Article navigation
October 2002
Technical Papers
Plastic Deformation of a Perforated Sheet With Nonuniform Circular Holes Along the Thickness Direction
Fuh-Kuo Chen, Professor,
e-mail: fkchen@w3.me.ntu.edu.tw
Fuh-Kuo Chen, Professor
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, ROC
11
Search for other works by this author on:
Yi-Che Lee, Graduate Student
Yi-Che Lee, Graduate Student
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, ROC
Search for other works by this author on:
Fuh-Kuo Chen, Professor
11
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, ROC
e-mail: fkchen@w3.me.ntu.edu.tw
Yi-Che Lee, Graduate Student
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, ROC
Contributed by the Materials Division for publication in the JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY. Manuscript received by the Materials Division June 19, 2001; revised manuscript received February 3, 2002. Associate Editor: H. M. Zbib.
J. Eng. Mater. Technol. Oct 2002, 124(4): 434-439 (6 pages)
Published Online: September 30, 2002
Article history
Received:
June 19, 2001
Revised:
February 3, 2002
Online:
September 30, 2002
Citation
Chen, F., and Lee, Y. (September 30, 2002). "Plastic Deformation of a Perforated Sheet With Nonuniform Circular Holes Along the Thickness Direction ." ASME. J. Eng. Mater. Technol. October 2002; 124(4): 434–439. https://doi.org/10.1115/1.1493805
Download citation file:
Get Email Alerts
Cited By
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Related Articles
Plastic Deformation of a Perforated Sheet With Non-Uniform Circular Holes Along the Thickness Direction
J. Eng. Mater. Technol (January,2003)
Torsion/Simple Shear of Single Crystal Copper
J. Eng. Mater. Technol (July,2002)
Relationship Between Rockwell C Hardness and Inelastic Material
Constants
J. Eng. Mater. Technol (April,2002)
Effect of Strain Rate on the Dynamic Hardness in Metals
J. Eng. Mater. Technol (October,2007)
Related Proceedings Papers
Related Chapters
Subsection NB—Class 1 Components
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 1, Third Edition
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading
Subsection NB—Class 1 Components
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1 Sixth Edition