Composite elliptic spring is a new concept as an application of fiber reinforced plastics in automotive suspensions. It functions in the same vertical deflection mode and packaging space as a steel coil spring and has the potential of saving as much as 50 percent by weight over a steel spring. The unique feature of the elliptic spring is that the fibers are utilized in tension instead of shear, thus avoiding the inherent weakness of a composite material in a coiled configuration. Several elliptic spring elements can be mounted in series to obtain the desired spring rate. In this paper, mechanical performance and failure analysis of composite elliptic springs under static loads are presented. Both thick and thin walled elliptic spring elements constructed from unidirectional E-glass fiber reinforced epoxy tapes were tested in static compression. Interlaminar shear failure is the primary failure mode in these springs. Both failure load and spring rate depend on the thickness of the spring. Joining of spring elements by bolts is also investigated.
Skip Nav Destination
Article navigation
January 1987
Research Papers
Static Mechanical Performance of Composite Elliptic Springs
P. K. Mallick
P. K. Mallick
Department of Mechanical Engineering, The University of Michigan-Dearborn, Dearborn, Mich. 48128
Search for other works by this author on:
P. K. Mallick
Department of Mechanical Engineering, The University of Michigan-Dearborn, Dearborn, Mich. 48128
J. Eng. Mater. Technol. Jan 1987, 109(1): 22-26 (5 pages)
Published Online: January 1, 1987
Article history
Received:
November 1, 1986
Online:
September 15, 2009
Citation
Mallick, P. K. (January 1, 1987). "Static Mechanical Performance of Composite Elliptic Springs." ASME. J. Eng. Mater. Technol. January 1987; 109(1): 22–26. https://doi.org/10.1115/1.3225927
Download citation file:
Get Email Alerts
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Related Articles
Impact Energy Absorption of Continuous Fiber Composite Tubes
J. Eng. Mater. Technol (January,1987)
Local Buckling and Failure of Pultruded Fiber-Reinforced Plastic Beams
J. Eng. Mater. Technol (April,1994)
Deformation and Failure Behavior of Woven Composite Laminates
J. Eng. Mater. Technol (April,1994)
Analytical and Experimental Studies of Short-Beam Interlaminar Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures
J. Eng. Mater. Technol (January,2001)
Related Chapters
Research on Strengthening Mechanism of Plant Root in Slope Protection
Geological Engineering: Proceedings of the 1 st International Conference (ICGE 2007)
Basic Concepts
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range
Fatigue Behavior of Continuous Carbon Fiber-Reinforced PEEK
Composite Materials: Fatigue and Fracture (Third Volume)