Topics: Composite materials , Epoxy resins , Fibers , Machinery , Manufacturing , Plasma spraying , Pressure , Regression analysis , Spraying (Coating processes) , Surface roughness

Simulation and Measurement of Refractive Index Variation in Localized Rapid Heating Molding for Polymer Optics

Xiaohua Liu, Tianfeng Zhou, Lin Zhang, Wenchen Zhou, Jianfeng Yu, L. James Lee, Allen Y. Yi

J. Manuf. Sci. Eng. January 2018, 140(1): 011004. doi: https://doi.org/10.1115/1.4037707

Abstract

View articletitled, Simulation and Measurement of Refractive Index Variation in Localized Rapid Heating Molding for Polymer Optics

Open the PDF for in another window

Topics: Coatings , Graphene , Heating , Molding , Polymers , Refractive index , Simulation , Temperature , Lenses (Optics) , Deformation

Procedure for Selecting Key Performance Indicators for Sustainable Manufacturing

Deogratias Kibira, Michael P. Brundage, Shaw Feng, K. C. Morris

J. Manuf. Sci. Eng. January 2018, 140(1): 011005. doi: https://doi.org/10.1115/1.4037439

Abstract

View articletitled, Procedure for Selecting Key Performance Indicators for Sustainable Manufacturing

Open the PDF for in another window

Topics: Manufacturing , Sustainability

Formability Prediction for Tube Hydroforming of Stainless Steel 304 Using Damage Mechanics Model

J. Yuenyong, M. Suthon, S. Kingklang, P. Thanakijkasem, S. Mahabunphachai, V. Uthaisangsuk

J. Manuf. Sci. Eng. January 2018, 140(1): 011006. doi: https://doi.org/10.1115/1.4038208

Abstract

View articletitled, Formability Prediction for Tube Hydroforming of Stainless Steel 304 Using Damage Mechanics Model

Open the PDF for in another window

Topics: Damage , Failure , Forming limit diagrams , Simulation , Steel , Stainless steel , Fracture (Materials) , Steel sheet , Nucleation (Physics) , Pressure

In-Plane Stiffness of Additively Manufactured Hierarchical Honeycomb Metamaterials With Defects

Kazi Moshiur Rahman, Zhong Hu, Todd Letcher

J. Manuf. Sci. Eng. January 2018, 140(1): 011007. doi: https://doi.org/10.1115/1.4038205

Abstract

View articletitled, In-Plane Stiffness of Additively Manufactured Hierarchical Honeycomb Metamaterials With Defects

Open the PDF for in another window

Topics: Additive manufacturing , Honeycomb structures , Stiffness , Elastic moduli

A Roll-Stack Contact Mechanics Model to Predict Strip Profile in Rolling Mills With Asymmetric, Continuously Variable Crown Rolls

Feng Zhang, Arif Malik

J. Manuf. Sci. Eng. January 2018, 140(1): 011008. doi: https://doi.org/10.1115/1.4037600

Abstract

View articletitled, A Roll-Stack Contact Mechanics Model to Predict Strip Profile in Rolling Mills With Asymmetric, Continuously Variable Crown Rolls

Open the PDF for in another window

Topics: Strips , Contact mechanics , Rolling mills , Simulation , Finite element model

An Experimental and Simulation Study for Powder Injection Multitrack Laser Cladding of P420 Stainless Steel on AISI 1018 Steel for Selected Mechanical Properties

Navid Nazemi, Jill Urbanic

J. Manuf. Sci. Eng. January 2018, 140(1): 011009. doi: https://doi.org/10.1115/1.4037604

Abstract

View articletitled, An Experimental and Simulation Study for Powder Injection Multitrack Laser Cladding of P420 Stainless Steel on AISI 1018 Steel for Selected Mechanical Properties

Open the PDF for in another window

Topics: Cladding systems (Building) , Heat , Lasers , Microhardness , Simulation , Mechanical properties , Temperature , Stainless steel , Stress

A Cohesive Zone Model for the Stamping Process Encountered During Three-Dimensional Printing of Fiber-Reinforced Soft Composites

Clayson C. Spackman, James F. Nowak, Kristen L. Mills, Johnson Samuel

J. Manuf. Sci. Eng. January 2018, 140(1): 011010. doi: https://doi.org/10.1115/1.4037603

Abstract

View articletitled, A Cohesive Zone Model for the Stamping Process Encountered During Three-Dimensional Printing of Fiber-Reinforced Soft Composites

Open the PDF for in another window

Topics: Fibers , Metal stamping , Additive manufacturing , Design , Polymers , Aluminum , Simulation , Rollers

Deformation Compensation During Buoyancy-Enabled Inkjet Printing of Three-Dimensional Soft Tubular Structures

Kyle Christensen, Zhengyi Zhang, Changxue Xu, Yong Huang

J. Manuf. Sci. Eng. January 2018, 140(1): 011011. doi: https://doi.org/10.1115/1.4037996

Abstract

View articletitled, Deformation Compensation During Buoyancy-Enabled Inkjet Printing of Three-Dimensional Soft Tubular Structures

Open the PDF for in another window

Topics: Deformation , Printing , Buoyancy

Effects of Laser Radiation on the Wetting and Diffusion Characteristics of Kovar Alloy on Borosilicate Glass

Min Zhang, Y. Lawrence Yao, Chang Jun Chen, Panjawat Kongsuwan, Grant Brandal, Dakai Bian

J. Manuf. Sci. Eng. January 2018, 140(1): 011012. doi: https://doi.org/10.1115/1.4037426

Abstract

View articletitled, Effects of Laser Radiation on the Wetting and Diffusion Characteristics of Kovar Alloy on Borosilicate Glass

Open the PDF for in another window

Topics: Alloys , Borosilicate glasses , Diffusion (Physics) , Glass , Lasers , Oxidation , Wetting , Oxygen , Bonding , Heat resistant glass

Optimization of Electro Discharge Machining Process Parameters With Fuzzy Logic for Stainless Steel 304 (ASTM A240)

Alaa M. Ubaid, Fikri T. Dweiri, Shukry H. Aghdeab, Laith Abdullah Al-Juboori

J. Manuf. Sci. Eng. January 2018, 140(1): 011013. doi: https://doi.org/10.1115/1.4038139

Abstract

View articletitled, Optimization of Electro Discharge Machining Process Parameters With Fuzzy Logic for Stainless Steel 304 (ASTM A240)

Open the PDF for in another window

Topics: Electrical discharge machining , Fuzzy logic , Machining , Optimization

Design for Manufacturing of Variable Microgeometry Cutting Tools

N. Z. Yussefian, A. Hosseini, K. Hosseinkhani, H. A. Kishawy

J. Manuf. Sci. Eng. January 2018, 140(1): 011014. doi: https://doi.org/10.1115/1.4038206

Abstract

View articletitled, Design for Manufacturing of Variable Microgeometry Cutting Tools

Open the PDF for in another window

Topics: Cutting , Cutting tools , Design for Manufacturing , Machining , Manufacturing , Modeling , Wear , Wedges , Finite element analysis , Design

Time-Domain Modeling of Varying Dynamic Characteristics in Thin-Wall Machining Using Perturbation and Reduced-Order Substructuring Methods

Oguzhan Tuysuz, Yusuf Altintas

J. Manuf. Sci. Eng. January 2018, 140(1): 011015. doi: https://doi.org/10.1115/1.4038000

Abstract

View articletitled, Time-Domain Modeling of Varying Dynamic Characteristics in Thin-Wall Machining Using Perturbation and Reduced-Order Substructuring Methods

Open the PDF for in another window

Topics: Dynamics (Mechanics) , Machining , Mode shapes , Modeling , Stiffness , Eigenvalues , Blades , Cutting , Algorithms , Milling

Partial/Parallel Disassembly Sequence Planning for Complex Products

Fei Tao, Luning Bi, Ying Zuo, A. Y. C. Nee

J. Manuf. Sci. Eng. January 2018, 140(1): 011016. doi: https://doi.org/10.1115/1.4037608

Abstract

View articletitled, Partial/Parallel Disassembly Sequence Planning for Complex Products

Open the PDF for in another window

Topics: Algorithms , Fasteners , Optimization , Energy consumption , Recycling

Technical Brief

Experimental Verification of Dynamic Behavior of a Capsule-Type Modular Machine Tool for Multifunctional Processes

Sungcheul Lee, Jong-Kweon Park

J. Manuf. Sci. Eng. January 2018, 140(1): 014501. doi: https://doi.org/10.1115/1.4037999

Abstract

View articletitled, Experimental Verification of Dynamic Behavior of a Capsule-Type Modular Machine Tool for Multifunctional Processes

Open the PDF for in another window

Topics: Design , Kinematics , Lasers , Machine tools , Machinery , Machining , Milling , Simulation , Structural analysis , Stiffness

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

On-orbit Processing and Hardware Performance of Microgravity Hydrothermal Synthesis for Graphene Aerogel

J. Manuf. Sci. Eng

Special Issue on the State-of-the-Art in Japanese Manufacturing Research

J. Manuf. Sci. Eng

On the Effects of Substrate Temperature on Glass Internal Modification Using Femtosecond Laser Pulses

J. Manuf. Sci. Eng (March 2025)

A Review of Advanced Roll-to-Roll Manufacturing: System Modeling and Control

J. Manuf. Sci. Eng (April 2025)

Data and Model Synergy-Driven Rolling Bearings Remaining Useful Life Prediction Approach Based on Deep Neural Network and Wiener Process

J. Manuf. Sci. Eng (April 2025)

Editorial

Reviewer's Recognition

Research Papers

A Generalized and Efficient Approach for Accurate Five-Axis Flute Grinding of Cylindrical End-Mills

Analytical Model for Prediction of Residual Stress in Dynamic Orthogonal Cutting Process

Optimizing the Manufacturing Processes of Carbon Fiber Epoxy Resin Composite Panels

Simulation and Measurement of Refractive Index Variation in Localized Rapid Heating Molding for Polymer Optics

Procedure for Selecting Key Performance Indicators for Sustainable Manufacturing

Formability Prediction for Tube Hydroforming of Stainless Steel 304 Using Damage Mechanics Model

In-Plane Stiffness of Additively Manufactured Hierarchical Honeycomb Metamaterials With Defects

A Roll-Stack Contact Mechanics Model to Predict Strip Profile in Rolling Mills With Asymmetric, Continuously Variable Crown Rolls

An Experimental and Simulation Study for Powder Injection Multitrack Laser Cladding of P420 Stainless Steel on AISI 1018 Steel for Selected Mechanical Properties

A Cohesive Zone Model for the Stamping Process Encountered During Three-Dimensional Printing of Fiber-Reinforced Soft Composites

Deformation Compensation During Buoyancy-Enabled Inkjet Printing of Three-Dimensional Soft Tubular Structures

Effects of Laser Radiation on the Wetting and Diffusion Characteristics of Kovar Alloy on Borosilicate Glass

Optimization of Electro Discharge Machining Process Parameters With Fuzzy Logic for Stainless Steel 304 (ASTM A240)

Design for Manufacturing of Variable Microgeometry Cutting Tools

Time-Domain Modeling of Varying Dynamic Characteristics in Thin-Wall Machining Using Perturbation and Reduced-Order Substructuring Methods

Partial/Parallel Disassembly Sequence Planning for Complex Products

Technical Brief

Experimental Verification of Dynamic Behavior of a Capsule-Type Modular Machine Tool for Multifunctional Processes

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Editorial

Research Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only