In industrial production, the roller trace design is still based on the trial-and-error method that is more like an art than science. In this paper, we establish the mathematical model of the involute curve roller trace and adopted the forming clearance compensation in the attaching-mandrel process. The backward pass roller trace is optimized to avoid the roller interference due to blank springback. The spinning simulation model of seven forming passes is set up and verified by the experiments with superalloy GH3030. The wall thickness, the strain distribution, and the tool forces are analyzed. The results show that the forming clearance compensation can greatly shorten the forming time and enhance the production efficiency and saving energy. The metal accumulates at the edge of the blank, and the maximum thinning zone appeared near the edge and is prone to crack. In the straightening pass, the tool forces of both the roller and the mandrel are larger than those in the other passes.
References
1.
Wong
, C. C.
, Dean
, T. A.
, and Lin
, J.
, 2003
, “A Review of Spinning, Shear Forming and Flow Forming Processes
,” Int. J. Mach. Tool. Manuf.
, 43
(14
), pp. 1419
–1435
. 2.
Music
, O.
, Allwood
, J. M.
, and Kawai
, K.
, 2010
, “A Review of the Mechanics of Metal Spinning
,” J. Mater. Process. Technol.
, 210
(1
), pp. 3
–23
. 3.
Quigley
, E.
, and Monaghan
, J.
, 2000
, “Metal Forming: An Analysis of Spinning Processes
,” J. Mater. Process. Technol.
, 103
(1
), pp. 114
–119
. 4.
Xia
, Q. X.
, Xiao
, G. F.
, Long
, H.
, Cheng
, X. Q.
, and Sheng
, X. F.
, 2014
, “A Review of Process Advancement of Novel Metal Spinning
,” Int. J. Mach. Tool. Manuf.
, 85
, pp. 100
–121
. 5.
Hayama
, M.
, Kudo
, H.
, and Shinokura
, T.
, 1970
, “Study of the Pass Schedule in Conventional Simple Spinning
,” Bull. JSME
, 13
(65
), pp. 1358
–1365
. 6.
Kawai
, K. I.
, and Hayama
, M.
, 1987
, “Roller Pass Programming in Conventional Spinning by N.C. Spinning Machine
,” Adv. Technol. Plast.
, 27
(308
), pp. 1053
–1059
. 7.
Hayama
, M.
, 1989
, “Roller Pass Programming and Selection of Working Conditions in Conventional Spinning
,” J. Jpn. Soc. Technol. Plast.
, 30
(345
), pp. 1403
–1410
.8.
Kang
, D. C.
, Gao
, X. C.
, Meng
, X. F.
, and Wang
, Z. H.
, 1999
, “Study on the Deformation Mode of Conventional Spinning of Plates
,” J. Mater. Process. Technol.
, 91
(1–3
), pp. 226
–230
. 9.
Liu
, J. H.
, Yang
, H.
, and Li
, Y. Q.
, 2002
, “A Study of the Stress and Strain Distributions of First-Pass Conventional Spinning Under Different Roller Traces
,” J. Mater. Process. Technol.
, 129
(1–3
), pp. 326
–329
. 10.
James
, A. P.
, and Julian
, M. A.
, 2015
, “Parametric Toolpath Design in Metal Spinning
,” CIRP Ann.- Manuf. Technol.
, 64
(1
), pp. 301
–304
. 11.
Li
, Y.
, Wang
, J.
, Lu
, G. D.
, and Pan
, G. J.
, 2014
, “A Numerical Study of the Effects of Roller Paths on Dimensional Precision in Die-Less Spinning of Sheet Metal
,” J. Zhejiang Univ.-Sci. A (Appl. Phys. Eng.)
, 15
(6
), pp. 432
–446
. 12.
Gan
, T.
, Kong
, Q.
, Yu
, Z.
, Zhao
, Y.
, and Lai
, X.
, 2016
, “A Numerical Study of Multi-Pass Design Based on Bezier Curve in Conventional Spinning of Spherical Components
,” MATEC Web Conf.
, 80
, p. 15012
. 13.
Gan
, T.
, Yu
, Z.
, Zhao
, Y.
, Evsyukov
, S. A.
, and Lai
, X.
, 2018
, “Effects of Backward Path Parameters on Formability in Conventional Spinning of Aluminum Hemispherical Parts
,” Trans. Nonferrous Met. Soc. China
, 28
(2
), pp. 328
–339
. 14.
Filip
, A. C.
, and Neagoe
, I.
, 2010
, “Simulation of the Metal Spinning Process by Multi-Pass Path using AutoCAD/VisualLISP
,” Proceedings of the 3rd WSEAS International Conference on Engineering Mechanics, Structures, Engineering Geology
, Corfu Island, Greece
, July 22–24
, pp. 161
–165
.15.
Mohamed
, A. A.
, Mahmoud
, A.
, and Mohamed
, Y.
, 2018
, “Experimental Investigation on the Geometrical Accuracy of the CNC Multi-Pass Sheet Metal Spinning Process
,” J. Manuf. Mater. Process.
, 2
(3
), 59
. 16.
Wang
, L.
, and Long
, H.
, 2013
, “Roller Path Design by Tool Compensation in Multi-Pass Conventional Spinning
,” Mater. Des.
, 46
, pp. 645
–653
. 17.
Wang
, L.
, and Long
, H.
, 2011
, “A Study of Effects of Roller Path Profiles on Tool Forces and Part Wall Thickness Variation in Conventional Metal Spinning
,” J. Mater. Process. Technol.
, 211
(12
), pp. 2140
–2151
. 18.
Chen
, J.
, Wan
, M.
, Li
, W. D.
, Xu
, C. X.
, Xu
, X. D.
, and Huang
, Z. B.
, 2008
, “Design of the Involute Trace of Multi-Pass Conventional Spinning and Application in Numerical Simulation
,” J. Plast. Eng.
, 15
(6
), pp. 53
–57
. (in Chinese).19.
Su
, P.
, and Wei
, Z. C.
, 2014
, “Roller Trace Design and Impact on Outcome of Spin Forming Molding
,” Ordnance Ind. Autom.
, 33
(8
), pp. 31
–38
(in Chinese).20.
Wei
, Z.
, Li
, W.
, Wan
, M.
, Xu
, C.
, Huang
, Z.
, and Liu
, J.
, 2010
, “Influence of Roller-Trace on Multi-Pass Conventional Spinning Process
,” J. Plast. Eng.
, 17
(3
), pp. 108
–112
(in Chinese).21.
Pan
, G.
, Li
, Y.
, Wang
, J.
, and Lu
, G.
, 2015
, “Review of Conventional Spinning Process and its Roller Path Design Development
,” J. Zhejiang Univ.-Sci. A (Appl. Phys. Eng.)
, 49
(4
), pp. 644
–653
.22.
Liu
, J. H.
, and Yang
, H.
, 2003
, “Development of Multi-Process Conventional Spinning and Research on Roller-Trace
,” Mech. Sci. Technol.
, 22
(5
), pp. 805
–807
(in Chinese).23.
Du
, J. H.
, Lu
, X. D.
, Deng
, Q.
, and Bi
, Z. N.
, 2015
, “Progress in the Research and Manufacture of GH4169 Alloy
,” J. Iron Steel Res. Int.
, 22
(8
), pp. 657
–663
. 24.
Kalpakcioglu
, S.
, 1961
, “On the Mechanics of Shear Spinning
,” ASME J. Eng. Ind.
, 83
(2
), pp. 125
–130
. 25.
Kobayashi
, S.
, 1963
, “Instability in Conventional Spinning of Cones
,” ASME J. Eng. Ind.
, 85
(1
), pp. 44
–48
. 26.
Sortais
, H. C.
, Kobayashi
, S.
, and Thomsen
, E. G.
, 1963
, “Mechanics of Conventional Spinning
,” ASME J. Eng. Ind.
, 85
(4
), pp. 346
–350
. 27.
Hayama
, M.
, and Murota
, T.
, 1963
, “Study of Metal Spinning (1st Report)-Cylindrical Shapes
,” Precis. Mach.
, 29
(5
), pp. 369
–376
(in Japanese).28.
Hayama
, M.
, and Murota
, T.
, 1963
, “Study of Metal Spinning (2nd Report)-Analysis of Conventional Simple Spinning I
,” Precis. Mach.
, 29
(6
), pp. 427
–435
(in Japanese).29.
Hayama
, M.
, and Murota
, T.
, 1963
, “Study of Metal Spinning (3rd Report)-Analysis of Conventional Simple Spinning II
,” Precis. Mach.
, 29
(8
), pp. 580
–586
(in Japanese).30.
Wang
, Z. R.
, and Liu
, G.
, 1989
, “A Suggestion on the Standardization of English Technical Terminology Used in Rotary Forming
,” Proceedings of the Fourth International Conference of Rotary Forming
, China
, Vol. 10
, pp. 38
–41
.31.
Avitzur
, B.
, and Yang
, C. T.
, 1960
, “Analysis of Power Spinning of Cones
,” ASME J. Eng. Ind.
, 82
(3
), pp. 231
–244
. 32.
Kim
, C.
, Jung
, S. Y.
, and Choi
, J. C.
, 2003
, “A Lower Upper-Bound Solution for Shear Spinning of Cones
,” Int. J. Mech. Sci.
, 45
(11
), pp. 1893
–1911
. 33.
Kim
, J. H.
, Park
, J. H.
, and Kim
, C.
, 2003
, “A Study on the Mechanics of Shear Spinning of Cones
,” J. Mech. Sci. Technol.
, 20
(6
), pp. 806
–818
. 34.
Nagarajan
, H. N.
, Kotrappa
, H.
, and Mallanna
, C.
, 1981
, “Mechanics of Flow Forming
,” Ann. CIRP
, 30
(1
), pp. 159
–162
. 35.
Wang
, L.
, and Long
, H.
, 2011
, “Investigation of Material Deformation in Multi-Pass Conventional Metal Spinning
,” Mater. Des.
, 32
(5
), pp. 2891
–2899
. 36.
Polyblank
, J. A.
, and Allwood
, J. M.
, 2014
, “Support Roller Control and Springback Compensation in Flexible Spinning
,” 11th ICTP
, Nagoya, Japan
, Oct. 19–24
, Vol. 81
, pp. 2499
–2504
.37.
Veille
, J. R.
, Toussaint
, F.
, Tabourot
, L.
, Vautrot
, M.
, and Balland
, P.
, 2015
, “Experimental and Numerical Investigation of a Short, Thin-Walled Steel Tube Incremental Forming Process
,” J. Manuf. Process.
, 19
, pp. 59
–66
. 38.
Wang
, Y.
, Shu
, X. D.
, Tian
, D. Y.
, Wei
, Y. L.
, and Zhu
, Y.
, 2017
, “Influence of Process Parameters on Flange Flatness of Conical Spun Parts With Thin Wall
,” Mech. Sci. Technol.
, 36
(7
), pp. 1068
–1072
(in Chinese).39.
Simufact.forming, Demos&examples. MSC Software Corporation,
2016
.40.
Li
, Z. X.
, and Shu
, X. D.
, 2019
, “Numerical and Experimental Analysis on Multi-Pass Conventional Spinning of the Cylindrical Part With GH3030
,” Int. J. Adv. Manuf. Technol.
Copyright © 2019 by ASME
You do not currently have access to this content.
