The design and implementation of feed, speed, and torque controllers for drilling is discussed. Dynamic models of the feedrate drive and spindle motors were developed using experimental data and least squares estimation. These dynamic models were subsequently used to design closed loop feed and speed controllers, which allow for independent control of the machining feed and speed during drilling. They effectively track constant, as well as step-change, command references. Subsequently, the feed controller was used to develop a dynamic model between feed and torque, and then was cascaded with a torque control loop. The dynamic modeling and subsequent closed loop controller design and performance are described.

Issue Section:
Technical Papers
Topics:
Control equipment, Drilling, Torque, Design, Dynamic models, Dynamic modeling, Machining, Motors, Torque control
1.
Amitay
G.
,
Malkin
S.
, and
Koren
Y.
,
1981
, “
Adaptive Control Optimization of Grinding
,”
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, Vol.
103
, No.
1
, pp.
103
–
108
.
2.
Astrom, K. J., and Wittenmark, B., 1990, Computer-Controlled Systems: Theory and Design, Prentice-Hall, NJ.
3.
Bedini
R.
, and
Pinotti
P. C.
,
1982
, “
Experiments on Adaptive Constrained Control of a CNC Lathe
,”
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, Vol.
104
, No.
2
, pp.
139
–
149
.
4.
Daneshmend
L. K.
, and
Pak
H. A.
,
1986
, “
Model Reference Adaptive Control of Feed Force in Turning
,”
ASME Journal of Dynamic Systems, Measurement, and Control
, Vol.
108
, No.
3
, pp.
215
–
222
.
5.
de Silva, C. W., 1989, Control Sensors and Actuators, Prentice-Hall, NJ.
6.
Drozda, T. J., and Wick, C., eds., 1983, Tool and Manufacturing Engineers Handbook: Volume 1—Machining, Fourth Edition, Society of Manufacturing Engineers, Dearborn, MI.
7.
Elbestawi
M. A.
, and
Sagherian
R.
,
1987
, “
Parameter Adaptive Control in Peripheral Milling
,”
International Journal of Machine Tools and Manufacturing
, Vol.
27
, No.
3
, pp.
399
–
414
.
8.
Furness, R. J., Wu, C. L., and Ulsoy, A. G., 1992a, “Statistical Analysis of the Effects of Feed, Speed, and Wear on Hole Quality in Drilling,” Sensors and Signal Processing for Manufacturing, S. Y. Liang, C. L. Wu, eds., PED-Vol. 55, pp. 97–112.
9.
Furness, R. J., Ulsoy, A. G., and Wu, C. L., 1992b, “Dynamic Modeling of the Thrust Force and Torque for Drilling,” Proceedings of the 1992 American Control Conference, pp. 384–390.
10.
Furness, R. J., Ulsoy, A. G., and Wu, C. L., 1992c, “Supervisory Drilling Control,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, in press.
11.
Koren, Y., and Ulsoy, A. G., 1989, “Adaptive Control in Machining,” Metals Handbook: Machining, J. R. Davis, eds., Vol. 16, 9th ed., ASM International, Metals Park, OH, pp. 618–626.
12.
Koren
Y.
, and
Masory
O.
,
1981
, “
Adaptive Control System with Process Estimation
,”
Annals of the CIRP
, Vol.
30
, No.
1
, pp.
373
–
376
.
13.
Koren, Y., 1983, Computer Control of Manufacturing Systems, McGraw-Hill, NY.
14.
Lauderbaugh
L. K.
, and
Ulsoy
A. G.
,
1989
, “
Model Reference Adaptive Force Control in Milling
,”
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, Vol.
111
, No.
1
, pp.
13
–
21
.
15.
Masory
O.
,
1984
, “
Real-Time Estimation of Cutting Process Parameters in Turning
,”
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, Vol.
106
, No.
3
, pp.
218
–
221
.
16.
Masory
O.
, and
Koren
Y.
,
1980
, “
Adaptive Control System for Turning
,”
Annals of the CIRP
, Vol.
29
, No.
1
, pp.
281
–
284
.
17.
Machining Data Handbook: Volumes 1 and 2, 1983, 3rd Edition, Machinability Data Center, Cincinnati, OH.
18.
Tomizuka, M., and Zhang, S., 1985, “Modeling and Conventional/Adaptive PI Control of a Lathe Cutting Process,” Proceedings of the 1985 American Control Conference.
19.
Tomizuka, M., Oh, J-H., and Dornfeld, D. C., 1983, “Model Reference Adaptive Control of the Milling Process,” Control of Manufacturing Processes and Robotic Systems, D. Hardt, ed., ASME, NY, pp. 55–63.
20.
Ulsoy
A. G.
, and
Koren
Y.
,
1989
, “
Applications of Adaptive Control to Machine Tool Process Control
,”
IEEE Control Systems Magazine
, Vol.
9
, No.
4
, pp.
33
–
37
.
21.
Ulsoy
A. G.
,
Koren
Y.
, and
Rasmussen
F.
,
1983
, “
Principal Developments in the Adaptive Control of Machine Tools
,”
ASME Journal of Dynamic Systems, Measurement, and Control
, Vol.
105
, pp.
107
–
112
.
This content is only available via PDF.
Copyright © 1996
 by The American Society of Mechanical Engineers
You do not currently have access to this content.