1-7 of 7
Keywords: glass
Close
Sort by
Journal Articles
Publisher: ASTM International
Article Type: Research-Article
J. ASTM Int.. May 2012, 9(5): 1–20.
Published Online: July 17, 2012
...Bernhard Weller; Iris Vogt The architecture of the past 100 years is characterized by a desire for ever greater transparency. Inevitably, that goes hand in hand with a constantly growing proportion of glass in the building envelope. But owing to the brittle nature of glass, there are only limited...
Journal Articles
Publisher: ASTM International
Article Type: Research-Article
J. ASTM Int.. March 2012, 9(3): 1–17.
Published Online: March 16, 2012
... maintain full composite action at the interface between adjacent dissimilar materials is critical in order to achieve optimum performance of the hybrid structural members. The objective of this experimental program was to investigate the bond performance between glass fibre reinforced polymer (GFRP) plates...
Journal Articles
Publisher: ASTM International
Article Type: Research-Article
J. ASTM Int.. November 2011, 8(10): 1–8.
Published Online: November 1, 2011
... visual fused glass 2010-12-08 Symposium onIn-Service Lubricant and Machine Analysis, Diagnostics, and Prognostics Jacksonville, FL References ASTM D7596-10, 2010, “ Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging...
Journal Articles
Publisher: ASTM International
Article Type: Research-Article
J. ASTM Int.. October 2009, 6(9): 1–13.
Published Online: October 1, 2009
...Bernhard Weller; Silke Tasche Adhesive joints in glass construction have been realized with one- and two-component silicones for more than 20 years. However, ultraviolet and visible light curing acrylates in glass constructions provide additional design potential due to their inherent transparency...
Journal Articles
Publisher: ASTM International
Article Type: Research-Article
J. ASTM Int.. July 2009, 6(7): 1–7.
Published Online: July 1, 2009
..., if it contacts these surfaces inadvertently from improper application or fluid run-down. This article focuses on the challenge of removing silicone residue from window glass. Several of the likely sources of the silicone residue are discussed, along with the difficulty of measuring the presence of the colorless...
Journal Articles
Publisher: ASTM International
Article Type: Research-Article
J. ASTM Int.. July 2009, 6(7): 1–6.
Published Online: July 1, 2009
...: windows, walls, performance, risk, energy ef ciency, durability, water performance, design loads, glass, structural performance, code compliance, builder training, durability, sustainability The Basics of ASTM E2112 The most basic premise of ASTM E2112 1 is that fenestration units must be adequately...
Journal Articles
Publisher: ASTM International
Article Type: Research-Article
J. ASTM Int.. April 2006, 3(4): 1–16.
Published Online: April 1, 2006
...NF Johnson Glass fragments are a prime source of injury to occupants of buildings subjected to an explosive event. Health and safety considerations and the principles of a “reasonable duty of care” impose requirements on employers and on the designers and managers of buildings. Two International...