In this paper, the issues and challenges of capturing CO2 from a pulverized coal (PC) power plant have been summarized and assessed and a hybrid power generation configuration is developed, which features a gas-turbine cogeneration unit supplying steam for stripping CO2, thereby decoupling the CO2 capture from the steam cycle of PC units. The hybrid power generation cases are modeled by using GTProTM and SteamProTM. The performance of the hybrid power plant is compared with the base case that uses extraction from the steam cycle. Retrofitting existing power plants by this hybrid concept is also assessed; performance comparison and economic analysis indicate that this kind of retrofitting is attractive to utilities with PC power generation fleet.
Skip Nav Destination
Article navigation
Research-Article
Hybrid Power Generation Plant for CO2 Capture
Brian Drover
Brian Drover
Hatch
,2800 Speakman Drive
,Mississauga, ON L5K 2R7
, Canada
Search for other works by this author on:
Shimin Deng
e-mail: bdeng@hatch.ca
Brian Drover
Hatch
,2800 Speakman Drive
,Mississauga, ON L5K 2R7
, Canada
Contributed by the Industrial and Cogeneration Committee of ASME for publication in the JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received February 16, 2013; final manuscript received November 22, 2013; published online January 2, 2014. Editor: David Wisler.
J. Eng. Gas Turbines Power. May 2014, 136(5): 052001 (6 pages)
Published Online: January 2, 2014
Article history
Received:
February 16, 2013
Revision Received:
November 22, 2013
Citation
Deng, S., Hynes, R., and Drover, B. (January 2, 2014). "Hybrid Power Generation Plant for CO2 Capture." ASME. J. Eng. Gas Turbines Power. May 2014; 136(5): 052001. https://doi.org/10.1115/1.4026116
Download citation file:
45
Views
0
Citations
Get Email Alerts
Cited By
Swirl Ratio Prediction Model in Rotor-Stator Cavity With Superposed Outward Radial Throughflow Based on Region Partition
J. Eng. Gas Turbines Power (August 2022)
Intercooled Recuperative Aero Engine System Optimization
J. Eng. Gas Turbines Power (August 2022)
Experimental Study of Various Low-Friction Coatings for High-Temperature Gas Foil Bearings Under Cold-Start Conditions
J. Eng. Gas Turbines Power (August 2022)
Performance Optimization of the High-Pressure Compressor in Series Two-Stage Turbocharging System Based on Low-Speed Performance Requirements of Diesel Engine
J. Eng. Gas Turbines Power (August 2022)
Related Articles
Examination of the Effect of System Pressure Ratio and Heat Recuperation on the Efficiency of a Coal-Based Gas Turbine Fuel Cell Hybrid Power Generation System With CO 2 Capture
J. Fuel Cell Sci. Technol (August,2011)
Technical and Economical Assessment of the Indirectly Heated Carbonate Looping Process
J. Energy Resour. Technol (July,2016)
Highly Efficient IGFC Hybrid Power Systems Employing Bottoming Organic Rankine Cycles With Optional Carbon Capture
J. Eng. Gas Turbines Power (February,2012)
Development of a Grid Connected Solar-Wind Hybrid System With Reduction in Levelized Tariff for a Remote Island in India
J. Sol. Energy Eng (August,2020)
Related Proceedings Papers
Related Chapters
Conclusions
Clean and Efficient Coal-Fired Power Plants: Development Toward Advanced Technologies
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
Carbon Capture for Coal-Fired Utility Power Generation: B&W's Perspective
Energy and Power Generation Handbook: Established and Emerging Technologies