Traditionally, engine performance has been simulated based on nondimensional maps for compressors and turbines. Component characteristic maps assume by default a given state of inlet conditions that cannot be easily altered in order to simulate two- or three-dimensional flow phenomena. Inlet flow distortion, for example, is usually simulated by applying empirical correction factors and modifiers to default component characteristics. Alternatively, the parallel compressor theory may be applied. The accuracy of the above methods has been rather questionable over the years since they are unable to capture in sufficient fidelity component-level, complex physical processes and analyze them in the context of the whole engine performance. The technique described in this paper integrates a zero-dimensional (nondimensional) gas turbine modelling and performance simulation system and a two-dimensional, streamline curvature compressor software. The two-dimensional compressor software can fully define the characteristics of any compressor at several operating conditions and is subsequently used in the zero-dimensional cycle analysis to provide a more accurate, physics-based estimate of compressor performance under clean and distorted inlet conditions, replacing the default compressor maps. The high-fidelity, two-dimensional compressor component communicates with the lower fidelity cycle via a fully automatic and iterative process for the determination of the correct operating point. This manuscript firstly gives a brief overview of the development, validation, and integration of the two-dimensional, streamline curvature compressor software with the low-fidelity cycle code. It also discusses the relative changes in the performance of a two-stage, experimental compressor with different types of radial pressure distortion obtained by running the two-dimensional streamline curvature compressor software independently. Moreover, the performance of a notional engine model, utilizing the coupled, two-dimensional compressor, under distorted conditions is discussed in detail and compared against the engine performance under clean conditions. In the cases examined, the analysis carried out by this study demonstrated relative changes in the simulated engine performance larger than 1%. This analysis proves the potential of the simulation strategy presented in this paper to investigate relevant physical processes occurring in an engine component in more detail, and to assess the effects of various isolated flow phenomena on overall engine performance in a timely and affordable manner. Moreover, in contrast to commercial computational fluid dynamics tools, this simulation strategy allows in-house empiricism and expertise to be incorporated in the flow-field calculations in the form of deviation and loss models.
Skip Nav Destination
e-mail: v.pachidis@cranfield.ac.uk
e-mail: p.pilidis@cranfield.ac.uk
e-mail: templalexis@hafa.gr
e-mail: t.alexander@qmul.ac.uk
e-mail: kotsiopoulos@hafa.gr
Article navigation
January 2007
Technical Papers
Prediction of Engine Performance Under Compressor Inlet Flow Distortion Using Streamline Curvature
Vassilios Pachidis,
Vassilios Pachidis
School of Engineering, Department of Power and Propulsion, Gas Turbine Engineering Group,
e-mail: v.pachidis@cranfield.ac.uk
Cranfield University
, Cranfield, Bedfordshire MK43 0AL, UK
Search for other works by this author on:
Pericles Pilidis,
Pericles Pilidis
School of Engineering, Department of Power and Propulsion, Gas Turbine Engineering Group,
e-mail: p.pilidis@cranfield.ac.uk
Cranfield University
, Cranfield, Bedfordshire MK43 0AL, UK
Search for other works by this author on:
Ioannis Templalexis,
Ioannis Templalexis
Section of Thermodynamics, Power, and Propulsion,
e-mail: templalexis@hafa.gr
Hellenic Air Force Academy
, Dekeleia Air Base, Greece
Search for other works by this author on:
Theodosios Korakianitis,
Theodosios Korakianitis
Department of Engineering,
e-mail: t.alexander@qmul.ac.uk
Queen Mary University of London
, Mile End Road, London E1 4NS, UK
Search for other works by this author on:
Petros Kotsiopoulos
Petros Kotsiopoulos
Section of Thermodynamics, Power, and Propulsion,
e-mail: kotsiopoulos@hafa.gr
Hellenic Air Force Academy
, Dekeleia Air Base, Greece
Search for other works by this author on:
Vassilios Pachidis
School of Engineering, Department of Power and Propulsion, Gas Turbine Engineering Group,
Cranfield University
, Cranfield, Bedfordshire MK43 0AL, UKe-mail: v.pachidis@cranfield.ac.uk
Pericles Pilidis
School of Engineering, Department of Power and Propulsion, Gas Turbine Engineering Group,
Cranfield University
, Cranfield, Bedfordshire MK43 0AL, UKe-mail: p.pilidis@cranfield.ac.uk
Ioannis Templalexis
Section of Thermodynamics, Power, and Propulsion,
Hellenic Air Force Academy
, Dekeleia Air Base, Greecee-mail: templalexis@hafa.gr
Theodosios Korakianitis
Department of Engineering,
Queen Mary University of London
, Mile End Road, London E1 4NS, UKe-mail: t.alexander@qmul.ac.uk
Petros Kotsiopoulos
Section of Thermodynamics, Power, and Propulsion,
Hellenic Air Force Academy
, Dekeleia Air Base, Greecee-mail: kotsiopoulos@hafa.gr
J. Eng. Gas Turbines Power. Jan 2007, 129(1): 97-103 (7 pages)
Published Online: February 1, 2006
Article history
Received:
October 1, 2005
Revised:
February 1, 2006
Citation
Pachidis, V., Pilidis, P., Templalexis, I., Korakianitis, T., and Kotsiopoulos, P. (February 1, 2006). "Prediction of Engine Performance Under Compressor Inlet Flow Distortion Using Streamline Curvature." ASME. J. Eng. Gas Turbines Power. January 2007; 129(1): 97–103. https://doi.org/10.1115/1.2363414
Download citation file:
Get Email Alerts
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
A Feasibility Study of Inverted Brayton Cycle for Gas Turbine Repowering
J. Eng. Gas Turbines Power (July,2005)
Real-Time Transient Three Spool Turbofan Engine Simulation: A Hybrid Approach
J. Eng. Gas Turbines Power (September,2009)
Component Map Generation of a Gas Turbine Using Genetic Algorithms
J. Eng. Gas Turbines Power (January,2006)
Performance Enhancement of Microturbine Engines Topped With Wave Rotors
J. Eng. Gas Turbines Power (January,2006)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students
Performance Testing of Combined Cycle Power Plant
Handbook for Cogeneration and Combined Cycle Power Plants, Second Edition