A numerical analysis of the flow behavior in industrial cooling systems based on arrays of impinging jets has been performed, using several eddy viscosity models to determine their modeling capabilities. For the cooling system studied, and in terms of mean Nusselt number values, the best agreement between experimental results and numerical predictions was obtained with the realizable model. On the other hand, numerical predictions of the local Nusselt number and its spatial variations along the wall are better adjusted to the experiments when using either the standard or the standard models. The results obtained also show that the predicted thermal field depends strongly on the combination of near-wall treatment and selected turbulence model.
Skip Nav Destination
e-mail: coussirat@mf.upc.es
Article navigation
July 2005
Technical Papers
Computational Fluid Dynamics Modeling of Impinging Gas-Jet Systems: II. Application to an Industrial Cooling System Device
M. Coussirat,
M. Coussirat
CDIF, Dpto. Mec. de Fluids,
e-mail: coussirat@mf.upc.es
Universidad Politècnica de Catalunya
, Av. Diagonal 647, 08028 Barcelona, Spain
Search for other works by this author on:
J. van Beeck,
J. van Beeck
von Kármán Institute for Fluid Dynamics
, Belgium
Search for other works by this author on:
M. Mestres,
M. Mestres
Instituto de Ingeniería del Agua y Medio Ambiente,
Universidad Politècnica de Valencia
, Spain
Search for other works by this author on:
E. Egusquiza,
E. Egusquiza
CDIF, Dpto. Mec. de Fluids,
Universidad Politècnica de Catalunya
, Av. Diagonal 647, 08028 Barcelona, Spain
Search for other works by this author on:
J.-M. Buchlin,
J.-M. Buchlin
von Kármán Institute for Fluid Dynamics
, Belgium
Search for other works by this author on:
C. Valero
C. Valero
CDIF, Dpto. Mec. de Fluids,
Universidad Politècnica de Catalunya
, Av. Diagonal 647, 08028 Barcelona, Spain
Search for other works by this author on:
M. Coussirat
CDIF, Dpto. Mec. de Fluids,
Universidad Politècnica de Catalunya
, Av. Diagonal 647, 08028 Barcelona, Spaine-mail: coussirat@mf.upc.es
J. van Beeck
von Kármán Institute for Fluid Dynamics
, Belgium
M. Mestres
Instituto de Ingeniería del Agua y Medio Ambiente,
Universidad Politècnica de Valencia
, Spain
E. Egusquiza
CDIF, Dpto. Mec. de Fluids,
Universidad Politècnica de Catalunya
, Av. Diagonal 647, 08028 Barcelona, Spain
J.-M. Buchlin
von Kármán Institute for Fluid Dynamics
, Belgium
C. Valero
CDIF, Dpto. Mec. de Fluids,
Universidad Politècnica de Catalunya
, Av. Diagonal 647, 08028 Barcelona, SpainJ. Fluids Eng. Jul 2005, 127(4): 704-713 (10 pages)
Published Online: April 19, 2005
Article history
Received:
July 21, 2004
Revised:
April 19, 2005
Connected Content
Citation
Coussirat, M., van Beeck, J., Mestres, M., Egusquiza, E., Buchlin, J., and Valero, C. (April 19, 2005). "Computational Fluid Dynamics Modeling of Impinging Gas-Jet Systems: II. Application to an Industrial Cooling System Device." ASME. J. Fluids Eng. July 2005; 127(4): 704–713. https://doi.org/10.1115/1.1949635
Download citation file:
Get Email Alerts
Switching Events of Wakes Shed From Two Short Flapping Side-by-Side Cylinders
J. Fluids Eng (May 2025)
Related Articles
Impingement Heat Transfer: Correlations and Numerical Modeling
J. Heat Transfer (May,2005)
Temperature Corrected Turbulence Model for High Temperature Jet Flow
J. Fluids Eng (September,2004)
Discussion: “Turbulent Gas Injections” (Ouellette, P., and Hill, P. G., 2000, ASME J. Fluids Eng., 122, pp. 743–752)
J. Fluids Eng (December,2000)
An Experimental and Analytical Investigation of Rectangular Synthetic Jets
J. Fluids Eng (December,2009)
Related Proceedings Papers
Related Chapters
CFD Simulations of a Mixed-flow Pump Using Various Turbulence Models
Mixed-flow Pumps: Modeling, Simulation, and Measurements
Antilock-Braking System Using Fuzzy Logic
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Adding Surface While Minimizing Downtime
Heat Exchanger Engineering Techniques