Numerical simulations of the turbulent flow in an asymmetric two-dimensional diffuser are carried out using three commercial CFD codes: CFX, Fluent, and Star-CD. A low-Reynolds number -ε model with damping functions and the four-equation model are used; the first one is available as a standard feature in all the codes, the model was implemented using the User Defined Routines. The flow features a large recirculating zone due to the adverse pressure gradient in the diffuser; the predictions agree very well with the experiments both for the mean velocity and the turbulent kinetic energy. The length of the separation bubble is also computed within 6 percent of the measured value. The -ε calculations do not show any recirculation and the agreement with the measurements is very poor. The three codes employed show very similar characteristics in terms of convergence and accuracy; in particular, the results obtained using the are consistent in all the codes, while appreciable differences are obtained when the -ε is employed.
Skip Nav Destination
Article navigation
December 2001
Technical Papers
Predictions of a Turbulent Separated Flow Using Commercial CFD Codes
Gianluca Iaccarino
Gianluca Iaccarino
Center for Turbulence Research, Stanford University, Stanford, CA 94305-3030
Search for other works by this author on:
Gianluca Iaccarino
Center for Turbulence Research, Stanford University, Stanford, CA 94305-3030
Contributed by the Fluids Engineering Division for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received by the Fluids Engineering Division October 16, 2000; revised manuscript received May 21, 2001. Associate Editor: I. Celik.
J. Fluids Eng. Dec 2001, 123(4): 819-828 (10 pages)
Published Online: May 21, 2001
Article history
Received:
October 16, 2000
Revised:
May 21, 2001
Citation
Iaccarino, G. (May 21, 2001). "Predictions of a Turbulent Separated Flow Using Commercial CFD Codes ." ASME. J. Fluids Eng. December 2001; 123(4): 819–828. https://doi.org/10.1115/1.1400749
Download citation file:
Get Email Alerts
Related Articles
Spectral Methods for Incompressible Viscous Flow. Applied Mathematical Sciences, Vol 148
Appl. Mech. Rev (January,2003)
Discussion: “Turbulent Gas Injections” (Ouellette, P., and Hill, P. G., 2000, ASME J. Fluids Eng., 122, pp. 743–752)
J. Fluids Eng (December,2000)
Combined Experimental/Numerical Development of Propulsor Evaluation Capability
J. Fluids Eng (August,2011)
Alternative LES and Hybrid RANS/LES for Turbulent Flows
J. Fluids Eng (December,2002)
Related Proceedings Papers
Related Chapters
CFD Simulations of a Mixed-flow Pump Using Various Turbulence Models
Mixed-flow Pumps: Modeling, Simulation, and Measurements
Assessment of Flow Aggressiveness at an Ultrasonic Horn Cavitation Erosion Test Device by PVDF Pressure Measurements and 3D Flow Simulations
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Cavitation CFD Prediction for NACA0015 Hydrofoil Flow Considering Boundary Layer Characteristics
Proceedings of the 10th International Symposium on Cavitation (CAV2018)