Abstract
Percussive drilling is suitable for the fragmentation of rocks and other similar materials with hard and brittle properties. Research on energy transfer efficiency is of great significance to improving the rock-breaking efficiency of percussive drilling. This paper numerically studied energy transfer efficiency and rock damage in percussive drilling with a multiple-button bit. In this study, the finite element method was used, and the concrete was selected as the research object. Moreover, the damage-plasticity model for concrete and the explicit dynamics solver in abaqus were adopted. Based on the above model, we analyzed the effects of different parameters on the energy transfer efficiency and the concrete damage. Results show that the degree of concrete damage is positively correlated with the output energy, referring to the energy actually absorbed by the concrete, of the percussive system. Under the condition of the same input energy, the energy transfer efficiency decreases as the number of buttons increases. With the increase of impact velocity of the impact hammer, the energy transfer efficiency augments. Multiple repeated impacts will cause the repeated damaging of the concrete, which reduces the energy transfer efficiency.
References
1.
Samuel
, G. R.
, 1996
, “Percussion Drilling…Is It a Lost Technique? A Review
,” Permian Basin Oil and Gas Recovery Conference
, Midland, TX
, Mar. 27–29
.2.
Pennington
, J. V.
, 1954
, “Rock Failure in Percussion
,” Petrol. Eng.
, 26
(5
), pp. B76
–B88
.3.
Han
, G.
, Bruno
, M.
, and Lao
, K.
, 2005
, “Percussion Drilling in Oil Industry: Review and Rock Failure Modelling
,” AADE 2005 National Technical Conference and Exhibition
, Wyndam Greenspoint in Houston, TX
, Apr. 5–7
.4.
He
, W.
, Hayatdavoudi
, A.
, Shi
, H.
, Sawant
, K.
, and Huang
, P.
, 2019
, “A Preliminary Fractal Interpretation of Effects of Grain Size and Grain Shape on Rock Strength
,” Rock Mech. Rock Eng.
, 52
(6
), pp. 1745
–1765
. 10.1007/s00603-018-1645-45.
Wu
, X.
, Huang
, Z.
, Zhang
, S.
, Cheng
, Z.
, Li
, R.
, Song
, H.
, Wen
, H.
, and Huang
, P.
, 2019
, “Damage Analysis of High-Temperature Rocks Subjected to LN 2 Thermal Shock
,” Rock Mech. Rock Eng.
, 52
(8
), pp. 2585
–2603
. 10.1007/s00603-018-1711-y6.
Wang
, T.
, Tian
, S.
, Li
, G.
, Sheng
, M.
, Ren
, W.
, Liu
, Q.
, and Zhang
, S.
, 2018
, “Molecular Simulation of CO2/CH4 Competitive Adsorption on Shale Kerogen for CO2 Sequestration and Enhanced gas Recovery
,” J. Phys. Chem. C
, 122
(30
), pp. 17009
–17018
. 10.1021/acs.jpcc.8b020617.
Simon
, R.
, 1964
, “Transfer of the Stress Wave Energy in the Drill Steel of a Percussive Drill to the Rock ☆
,” Int. J. Rock Mech. Mining Sci. Geomech. Abstracts
, 1
(3
), pp. 397
–411
. 10.1016/0148-9062(64)90006-38.
Lundberg
, B.
, 1973
, “Energy Transfer in Percussive Rock Destruction—I: Comparison of Percussive Methods
,” Int. J. Rock Mech. Mining Sci. & Geomech. Abst.
, 10
(5
), pp. 381
–399
. 10.1016/0148-9062(73)90024-79.
Lundberg
, B.
, 1973
, “Energy Transfer in Percussive Rock Destruction—II: Supplement on Hammer Drilling
,” Int. J. Rock Mech. Mining Sci. & Geomech. Abst.
, 10
(5
), pp. 401
–419
. 10.1016/0148-9062(73)90025-910.
Lundberg
, B.
, 1973
, “Energy Transfer in Percussive Rock Destruction—III: Stress Wave Transmission Through Joints
,” Int. J. Rock Mech. Mining Sci. & Geomech. Abst.
, 10
(5
), pp. 421
–435
. 10.1016/0148-9062(73)90026-011.
Gupta
, R.
, 1982
, “Optimum Design of Wave Transmitting Joints
,” Wave Motion
, 4
(1
), pp. 75
–83
. 10.1016/0165-2125(82)90015-412.
Wu
, C.
, 1991
, “An Analytical Study of Percussive Energy Transfer in Hydraulic Rock Drills
,” Mining Sci. Technol.
, 13
(1
), pp. 57
–68
. 10.1016/0167-9031(91)90254-A13.
Franca
, L. F. P.
, 2011
, “A bit–Rock Interaction Model for Rotary–Percussive Drilling
,” Int. J. Rock Mech. Mining Sci.
, 48
(5
), pp. 827
–835
. 10.1016/j.ijrmms.2011.05.00714.
Lundberg
, B.
, and Collet
, P.
, 2010
, “Optimal Wave with Respect to Efficiency in Percussive Drilling with Integral Drill Steel
,” Int. J. Impact Eng.
, 37
(8
), pp. 901
–906
. 10.1016/j.ijimpeng.2010.02.00115.
Lundberg
, B.
, and Collet
, P.
, 2015
, “Optimal Wave Shape with Respect to Efficiency in Percussive Drilling with Detachable Drill bit
,” Int. J. Impact Eng.
, 86
, pp. 179
–187
. 10.1016/j.ijimpeng.2015.06.02116.
Miaokang
, Z.
, and Johnsson
, O.
,1983
, On Dynamic Failure of Rock in Percussive Drilling, University of Lulea, Sweden
.17.
Karlsson
, L. G.
, 1989
, “Experimental Study of a Percussive Process for Rock Fragmentation
,” Int. J. Rock Mech. Mining Sci. Geomech. Abstracts
, 26
(1
), pp. 45
–50
. 10.1016/0148-9062(89)90524-X18.
Liu
, H. Y.
, Kou
, S. Q.
, and Lindqvist
, P. A.
, 2008
, “Numerical Studies on Bit-Rock Fragmentation Mechanisms
,” Int. J. Geomech.
, 8
(1
), pp. 45
–67
. 10.1061/(ASCE)1532-3641(2008)8:1(45)19.
Saadati
, M.
, Forquin
, P.
, Weddfelt
, K.
, Larsson
, P. L.
, and Hild
, F.
, 2014
, “Granite Rock Fragmentation at Percussive Drilling—Experimental and Numerical Investigation
,” Int. J. Numer. Anal. Methods Geomech.
, 38
(8
), pp. 828
–843
. 10.1002/nag.223520.
Saksala
, T.
, 2013
, “3D Numerical Modelling of bit–Rock Fracture Mechanisms in Percussive Drilling with a Multiple-Button bit
,” Int. J. Numer. Anal. Methods Geomech.
, 37
(3
), pp. 309
–324
. 10.1002/nag.208821.
Saksala
, T.
, Gomon
, D.
, Hokka
, M.
, and Kuokkala
, V. T.
, 2014
, “Numerical and Experimental Study of Percussive Drilling with a Triple-Button bit on Kuru Granite
,” Int. J. Impact Eng.
, 72
(4
), pp. 56
–66
. 10.1016/j.ijimpeng.2014.05.00622.
Saksala
, T.
, 2016
, “Numerical Study of the Influence of Hydrostatic and Confining Pressure on Percussive Drilling of Hard Rock
,” Comput. Geotech.
, 76
, pp. 120
–128
. 10.1016/j.compgeo.2016.02.02123.
Song
, H.
, Shi
, H.
, Ji
, Z.
, Wu
, X.
, Li
, G.
, Zhao
, H.
, Wang
, G.
, Liu
, Y.
, and Hou
, X.
, 2019
, “The Percussive Process and Energy Transfer Efficiency of Percussive Drilling With Consideration of Rock Damage
,” Int. J. Rock Mech. Mining Sci.
, 119
, pp. 1
–12
. 10.1016/j.ijrmms.2019.04.01224.
Sakoguchi
, K.
, Minami
, H.
, Suzuki
, S.
, and Tanaka
, T.
, 2013
, “Evaluation of Fracture Resistance of Indirect Composite Resin Crowns by Cyclic Impact Test: Influence of Crown and Abutment Materials
,” Dental Mater. J.
, 32
(3
), pp. 433
–440
. 10.4012/dmj.2012-31325.
Salesky
, W. J.
, and Payne
, B. R.
, 1987
, “Preliminary Field Test Results of Diamond-Enhanced Inserts for Three-Cone Rock Bits
,” SPE/IADC Drilling Conference
, New Orleans, LA
, Mar. 15–18
.26.
Genikomsou
, A. S.
, and Polak
, M. A.
, 2015
, “Finite Element Analysis of Punching Shear of Concrete Slabs Using Damaged Plasticity Model in ABAQUS
,” Eng. Struct.
, 98
, pp. 38
–48
. 10.1016/j.engstruct.2015.04.01627.
Jankowiak
, T.
, and Lodygowski
, T.
, 2005
, “Identification of Parameters of Concrete Damage Plasticity Constitutive Model
,” Found. Civ. Environ. Eng.
, 6
(1
), pp. 53
–69
.28.
Lubliner
, J.
, Oliver
, J.
, Oller
, S.
, and Onate
, E.
, 1989
, “A Plastic-Damage Model for Concrete
,” Int. J. Solids Struct.
, 25
(3
), pp. 299
–326
. 10.1016/0020-7683(89)90050-429.
Lee
, J.
, and Fenves
, G. L.
, 1998
, “Plastic-damage Model for Cyclic Loading of Concrete Structures
,” J. Eng. Mech.
, 124
(8
), pp. 892
–900
. 10.1061/(ASCE)0733-9399(1998)124:8(892)30.
Sun
, J. S.
, Lee
, K. H.
, and Lee
, H. P.
, 2000
, “Comparison of Implicit and Explicit Finite Element Methods for Dynamic Problems
,” J. Mater. Processing Technol.
, 105
(1–2
), pp. 110
–118
. 10.1016/S0924-0136(00)00580-X31.
Wu
, J.-Y.
, and Li
, J.
, 2006
, “Elastoplastic Damage Constitutive Model for Concrete Considering Strain Rate Effect Under Dynamic Loading
,” J.-Tongji Univ.
, 34
(11
), pp. 1427–1430+1440
.32.
Cicekli
, U.
, Voyiadjis
, G. Z.
, and Al-Rub
, R. K. A.
, 2007
, “A Plasticity and Anisotropic Damage Model for Plain Concrete
,” Int. J. Plasticity
, 23
(10–11
), pp. 1874
–1900
. 10.1016/j.ijplas.2007.03.006Copyright © 2020 by ASME
You do not currently have access to this content.
