In this work, the effect of temperature on the pressure loss for Newtonian fluid in fully eccentric annulus with pipe rotation is investigated. Extensive experiments with water are conducted at Izmir Katip Celebi University (IKCU), Civil Engineering Department for various flow velocities ranging between 0.7 m/s and 2.9 m/s, pipe rotation range between 0 rpm and 120 rpm. The effect of temperature on frictional pressure losses is also examined, and the temperature is varied from 20 °C to 65 °C. It was observed that, an increase in the fluid temperature in fully eccentric annulus results in a decrease in the pressure gradient. On the other hand, the influence of temperature on pressure gradient becomes more significant, as the Reynolds number is raised. Variation of Taylor number causes negligible changes on frictional pressure losses for all temperature conditions considered. By using regression analysis of the dataset obtained from the experimental work, a simple empirical frictional pressure losses correlation taking into account of temperature effect is proposed. Results showed that a good agreement between the measured and predicted values is achieved with almost 94% coefficient of determination.
Skip Nav Destination
Article navigation
July 2017
Research-Article
Determination of Newtonian Fluid Flow Behavior Including Temperature Effects in Fully Eccentric Annulus
Erman Ulker,
Erman Ulker
Department of Civil Engineering,
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: erman.ulker@ikc.edu.tr
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: erman.ulker@ikc.edu.tr
Search for other works by this author on:
Mehmet Sorgun,
Mehmet Sorgun
Department of Civil Engineering,
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: mehmetsorgun@gmail.com
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: mehmetsorgun@gmail.com
Search for other works by this author on:
Ismail Solmus,
Ismail Solmus
Department of Mechanical Engineering,
Ataturk University,
Erzurum 25240, Turkey
e-mail: solmus@atauni.edu.tr
Ataturk University,
Erzurum 25240, Turkey
e-mail: solmus@atauni.edu.tr
Search for other works by this author on:
Ziya Haktan Karadeniz
Ziya Haktan Karadeniz
Department of Mechanical Engineering,
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: zhaktan.karadeniz@ikc.edu.tr
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: zhaktan.karadeniz@ikc.edu.tr
Search for other works by this author on:
Erman Ulker
Department of Civil Engineering,
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: erman.ulker@ikc.edu.tr
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: erman.ulker@ikc.edu.tr
Mehmet Sorgun
Department of Civil Engineering,
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: mehmetsorgun@gmail.com
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: mehmetsorgun@gmail.com
Ismail Solmus
Department of Mechanical Engineering,
Ataturk University,
Erzurum 25240, Turkey
e-mail: solmus@atauni.edu.tr
Ataturk University,
Erzurum 25240, Turkey
e-mail: solmus@atauni.edu.tr
Ziya Haktan Karadeniz
Department of Mechanical Engineering,
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: zhaktan.karadeniz@ikc.edu.tr
Izmir Katip Celebi University,
Izmir 35620, Turkey
e-mail: zhaktan.karadeniz@ikc.edu.tr
1Corresponding author.
Contributed by the Advanced Energy Systems Division of ASME for publication in the JOURNAL OF ENERGY RESOURCES TECHNOLOGY. Manuscript received August 29, 2016; final manuscript received January 21, 2017; published online February 24, 2017. Assoc. Editor: Antonio J. Bula.
J. Energy Resour. Technol. Jul 2017, 139(4): 042001 (5 pages)
Published Online: February 24, 2017
Article history
Received:
August 29, 2016
Revised:
January 21, 2017
Citation
Ulker, E., Sorgun, M., Solmus, I., and Karadeniz, Z. H. (February 24, 2017). "Determination of Newtonian Fluid Flow Behavior Including Temperature Effects in Fully Eccentric Annulus." ASME. J. Energy Resour. Technol. July 2017; 139(4): 042001. https://doi.org/10.1115/1.4035908
Download citation file:
Get Email Alerts
Cited By
Numerical Study of Composite Percussive Drilling With Consideration of Heat Transfer Between Drilling Fluid and Bottom-Hole Rock in Geothermal Drilling
J. Energy Resour. Technol (June 2023)
An Investigation of the Impact of Combustion Chamber Geometry on Turbulent Burning Speeds in a Thermodynamic Model
J. Energy Resour. Technol (June 2023)
Synergy in Syngas Yield From Co-Pyrolysis of Cow and Chicken Manures
J. Energy Resour. Technol (June 2023)
Related Articles
Simple Correlations and Analysis of Cuttings Transport With Newtonian and Non-Newtonian Fluids in Horizontal and Deviated Wells
J. Energy Resour. Technol (September,2013)
Extrapolation and Curve-Fitting of Calibration Data for Differential Pressure Flow Meters
J. Eng. Gas Turbines Power (February,2010)
Advanced Geothermal Wellbore Hydraulics Model
J. Energy Resour. Technol (September,2000)
Heat Transfer Through a Pressure-Driven Three-Dimensional Boundary Layer
J. Heat Transfer (May,1991)
Related Proceedings Papers
Related Chapters
Example Open-Book Questions
Quick Guide to the API 570 - Certified Pipework Inspector Syllabus
Pressure Testing
Process Piping: The Complete Guide to ASME B31.3, Third Edition
Boundary Layer Analysis
Centrifugal Compressors: A Strategy for Aerodynamic Design and Analysis