Pyrolysis and ignition characteristics of pulverized coals were examined under similar burning conditions to those of industrial burners. In the early stage, fine particles (less than 37 μm) were mainly pyrolyzed by convective heat transfer from surrounding gas. The coals ignited when pyrolyzed volatile matter mixed with surrounding air and formed a combustible mixture. Pyrolysis of large particles was delayed, but accelerated after ignition by radiant heat transfer from coal flames. The effects of radiant heat transfer were strong for intermediate-size particles (37–74 μm). Ignition temperature was examined analytically by using a modified distributed activation energy model for pyrolysis. The calculated results agreed with experimental ones obtained from both laboratory-scale and semi-industrial-scale burners.
Skip Nav Destination
masayuki_taniguchi@pis.hitachi.co.jp
Article navigation
March 2001
Technical Papers
Pyrolysis and Ignition Characteristics of Pulverized Coal Particles
Masayuki Taniguchi,
masayuki_taniguchi@pis.hitachi.co.jp
Masayuki Taniguchi
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
Search for other works by this author on:
Hirofumi Okazaki,
Hirofumi Okazaki
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
Search for other works by this author on:
Hironobu Kobayashi,
Hironobu Kobayashi
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
Search for other works by this author on:
Shigeru Azuhata,
Shigeru Azuhata
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
Search for other works by this author on:
Hiroshi Miyadera,
Hiroshi Miyadera
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
Search for other works by this author on:
Hidetaka Muto,
Hidetaka Muto
Power Engineering Systems, Babcock-Hitachi, K. K., Tokyo, Japan
Search for other works by this author on:
Toshikazu Tsumura
Toshikazu Tsumura
Kure Division, Babcock-Hitachi, K. K., Hiroshima, Japan
Search for other works by this author on:
Masayuki Taniguchi
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
masayuki_taniguchi@pis.hitachi.co.jp
Hirofumi Okazaki
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
Hironobu Kobayashi
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
Shigeru Azuhata
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
Hiroshi Miyadera
Power & Industrial Systems R & D Laboratory, Hitachi, Ltd. Power & Industrial Systems, Hitachi-shi, Ibaraki-ken, 319-1292, Japan
Hidetaka Muto
Power Engineering Systems, Babcock-Hitachi, K. K., Tokyo, Japan
Toshikazu Tsumura
Kure Division, Babcock-Hitachi, K. K., Hiroshima, Japan
Contributed by the Fuels and Combustion Technologies Division and presented at the 2nd International Symposium on Advanced Energy Conversion Systems and Related Technologies, Nagoya, Japan, December 1–3, 1998, of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS. Manuscript received by the FACT Division, March 15, 2000; revised manuscript received October 30, 2000. Associate Editor: C. Saltiel.
J. Energy Resour. Technol. Mar 2001, 123(1): 32-38 (7 pages)
Published Online: October 30, 2000
Article history
Received:
March 15, 2000
Revised:
October 30, 2000
Citation
Taniguchi, M., Okazaki , H., Kobayashi , H., Azuhata , S., Miyadera, H., Muto, H., and Tsumura, T. (October 30, 2000). "Pyrolysis and Ignition Characteristics of Pulverized Coal Particles ." ASME. J. Energy Resour. Technol. March 2001; 123(1): 32–38. https://doi.org/10.1115/1.1347989
Download citation file:
Get Email Alerts
Numerical Study of Composite Percussive Drilling With Consideration of Heat Transfer Between Drilling Fluid and Bottom-Hole Rock in Geothermal Drilling
J. Energy Resour. Technol (June 2023)
An Investigation of the Impact of Combustion Chamber Geometry on Turbulent Burning Speeds in a Thermodynamic Model
J. Energy Resour. Technol (June 2023)
Synergy in Syngas Yield From Co-Pyrolysis of Cow and Chicken Manures
J. Energy Resour. Technol (June 2023)
Related Articles
Lean Blowout Limit and NO x Production of a Premixed Sub-ppm NO x Burner With Periodic Recirculation of Combustion Products
J. Eng. Gas Turbines Power (April,2006)
Emission Characteristics of a Premixed Cyclic-Periodical-Mixing Combustor Operated With Hydrogen-Natural Gas Fuel Mixtures
J. Eng. Gas Turbines Power (February,2010)
Influence of the Gas and Particle Residence Time on Fast Pyrolysis of Lignite
J. Energy Resour. Technol (June,2007)
Two-Dimensional Spectroscopic Observation of Nonluminous Flames in a Regenerative Industrial Furnace Using Coal Gas
J. Eng. Gas Turbines Power (January,2004)
Related Proceedings Papers
Related Chapters
Lay-Up and Start-Up Practices
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration
Numerical Simulation Research on a Fixed Bed Gasifier
International Conference on Information Technology and Management Engineering (ITME 2011)
Inhibiting Pyrolysis Process for Fiber-Reinforced Composites by Using Flame Retardants Additions
International Conference on Software Technology and Engineering, 3rd (ICSTE 2011)