Nickel-yttria stabilized zirconia (Ni-YSZ) is the most widely used material for solid oxide fuel cell (SOFC) anodes. Anode-supported SOFCs rely on the anode to provide mechanical strength to the positive–electrolyte–negative (PEN) structure. The stresses generated in the anode can result in the formation of microcracks that degrade its structural properties and electrochemical performance. In this paper, a brittle elastic damage model is developed for Ni-YSZ and implemented in finite element analysis with the help of a user-defined subroutine. The model is exploited to predict Ni-YSZ stress–strain relations at temperatures and porosities that are difficult to generate experimentally. It is observed that the anode material degradation depends on the level of strain regardless of the temperature at the same porosity: at higher temperature, lower load is required to produce a specified level of strain than at lower temperature. Conversely, the anode material degrades and fails at a lower level of strain at higher porosity at the same temperature. The information obtained from this research will be useful to establish material parameters to achieve optimal robustness of SOFC stacks.
References
1.
Douvartzides
, S. L.
, Coutelieris
, F. A.
, Demin
, A. K.
, and Tsiakaras
, P. E.
, 2003, “Fuel Options for Solid Oxide Fuel Cells: A Thermodynamic Analysis
,” AIChE J.
, 49
(1
), pp. 248
–257
.2.
Aguilar
, L.
, Zha
, S.
, Cheng
, Z.
, Winnick
, J.
, and Liu
, M.
, 2004, “A Solid Oxide Fuel Cell Operating on Hydrogen Sulfide (H2S) and Sulfur-Containing Fuels
,” J. Power Sources
, 135
(1–2
), pp. 17
–24
.3.
Nguyen
, B. N.
, Koeppel
, B. J.
, Ahzi
, S.
, Khaleel
, M. A.
, and Singh
, P.
, 2006, “Crack Growth in Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling
,” J. Am. Ceram. Soc.
, 89
(4
), pp. 1358
–1368
.4.
Radovic
, M.
, and Lara-Curzio
, E.
, 2004, “Mechanical Properties of Tape Cast Nickel-Based Anode Materials for Solid Oxide Fuel Cells Before and After Reduction in Hydrogen
,” Acta Mater.
, 52
(20
), pp. 5747
–5756
.5.
Selcuk
, A.
, Merere
, G.
, and Atkinson
, A.
, 2001, “The Influence of Electrodes on the Strength of Planar Zirconia Solid Oxide Fuel Cells
,” J. Mater. Sci.
, 36
(5
), pp. 1173
–1182
.6.
Fuel Cell Handbook
, 2004, 7th ed., US Department of Energy, EG&G Technical Services, Inc.
7.
Yates
, C.
, and Winnick
, J.
, 1999, “Anode Materials for a Hydrogen Sulfide Solid Oxide Fuel Cell
,” J. Electrochem. Soc.
, 146
(8
), pp. 2841
–2844
.8.
Gunji
, A.
, Wen
, C.
, Otomo
, J.
, Kobayashi
, T.
, Ukai
, K.
, Mizutani
, Y.
, and Takahashi
, H.
, 2004, “Carbon Deposition Behaviour on Ni–ScSZ Anodes for Internal Reforming Solid Oxide Fuel Cells
,” J. Power Sources
, 131
(1–2
), pp. 285
–288
.9.
Costa-Nunes
, O.
, Gorte
, R. J.
, and Vohs
, J. M.
, 2005, “Comparison of the Performance of Cu–CeO2–YSZ and Ni–YSZ Composite SOFC Anodes with H2, CO, and Syngas
,” J. Power Sources
, 141
(2
), pp. 241
–249
.10.
Ming
, N. Q.
, and Takahashi
, T.
, 1995, Science and Technology of the Ceramic Fuel Cells
, Elsevier
, Amsterdam
.11.
Larrain
, D.
, Van Herle
, J.
, and Favrat
, D.
, 2006, “Simulation of SOFC Stack and Repeat Elements Including Interconnect Degradation and Anode Reoxidation Risk
,” J. Power Sources
, 161
(1
), pp. 392
–403
.12.
Yokokawa
, H.
, Tu
, H.
, Iwanschitz
, B.
, and Mai
, A.
, 2008, “Fundamental Mechanisms Limiting Solid Oxide Fuel Cell Durability
,” J. Power Sources
, 182
(2
), pp. 400
–412
.13.
Kupkove
, M.
, 1993, “Porosity Dependence of Material Elastic Moduli
,” J. Mater. Sci.
, 28
(19
), pp. 5265
–5268
.14.
Radovic
, M.
, and Lara-Curzio
, E.
, 2004, “Elastic Properties of Nickel-Based Anodes for Solid Oxide Fuel Cells as a Function of the Fraction of Reduced NiO
,” J. Am. Ceram. Soc.
, 87
(12
), pp. 2242
–2246
.15.
Liu
, W.
, Sun
, X.
, and Khaleel
, M. A.
, 2008, “Predicting Young’s Modulus of Glass/Ceramic Sealant for Solid Oxide Fuel Cell Considering the Combined Effects of Aging, Micro-voids and Self-healing
,” J. Power Sources
185
(2
), pp. 1193
–1200
.16.
Lin
, C. K.
, Chen
, T. T.
, Chyou
, Y. P.
, and Chiang
, L. K.
, 2007, “Thermal Stress Analysis of a Planar SOFC Stack
,” J. Power Sources
, 164
(1
), pp. 238
–251
.17.
Gutierrez-Mora
, F.
, Ralph
, J. M.
, and Routbort
, J. L.
, 2002, “High-Temperature Mechanical Properties of Anode-Supported Bilayers
,” Solid State Ion.
, 149
(3–4
), pp. 177
–184
.18.
Yakabe
, H.
, Ogiwara
, T.
, Hishinuma
, M.
, and Yasuda
, I.
, 2001, “3-D Model Calculation for Planar SOFC
,” J. Power Sources
, 102
(1–2
) pp. 144
–154
.19.
ABAQUS, 2004,
Analysis User’s Manual
, Version 6.5, Hibbitt, Karlsson & Sorensen
, Providence, RI
.20.
Taqieddin
, N.
, 2005, “Elasto-Plastic and Damage Modeling of Reinforced Concrete Ph.D. thesis,” Louisiana State University, Baton Rouge, LA.21.
Murakami
, S.
, and Kamiya
, K.
, 1997, “Constitutive and Damage Evolution Equations of Elastic-Brittle Materials Based on Irreversible Thermodynamics
,” Int. J. Mech. Sci.
39
(4
), pp. 473
–486
.22.
Wang
, P. T.
, 1977, “Complete Stress-Strain Curves of Concrete and Its Effect on Ductility of Reinforced Concrete Members Ph.D. thesis,” University of Illinois at Chicago Circle, Chicago, IL.23.
Lemaitre
, J.
, 1996, A Course on Damage Mechanics
, Springer
, Berlin, Chap. II
.24.
Kachanov
, L. M.
, 1999, “Rupture Time under Creep Conditions
,” Int. J. Fract.
, 97
(1–4
), pp. 11
–18
.25.
Chow
, C. L.
, and Wang
, J.
, 1987, “An Anisotropic Theory of Continuum Damage Mechanics for Ductile Fracture
,” Eng. Fract. Mech.
27
(5
), pp. 547
–558
.26.
Iqbal
, G.
, Guo
, H.
, Kang
, B. S.
, and Marina
, O. A.
, “Durability Prediction of Solid Oxide Fuel Cell Anode Material under Thermo-mechanical and Fuel Gas Contaminants Effects
,” Int. J. Appl. Ceram. Technol.
, 8
(1
), 13
–22
.27.
Wang
, J. C.
, 1984, “Young’s Modulus of Porous Materials—Part I: Theoretical Derivation of Modulus-Porosity Correlation
,” J. Mater. Sci.
, 19
(3
), pp. 801
–808
.28.
Rice
, R. W.
, 1996, “Evaluation and Extension of Physical Property-Porosity Models Based on Minimum Solid Area
,” J. Mater. Sci.
, 31
(1
), pp. 102
–118
.29.
Rice
, R. W.
, 1996, “Comparison of Physical Property-Porosity Behaviour with Minimum Solid Area Models
,” J. Mater. Sci.
, 31
(6
), pp. 1509
–1528
.30.
Weil
, K. S.
, Deibler
, J. E.
, Hardy
, J. S.
, Chick
, L. A.
, Coyle
, C. A.
, Kim
, D. S.
, and Xia
, G.
, 2004, “Rupture Testing as a Tool for Developing Planar Solid Oxide Fuel Cell Seals
,” J. Mater. Eng. Perform
, 13
(3
), pp. 316
–326
.Copyright © 2011
by American Society of Mechanical Engineers
You do not currently have access to this content.
