In this work, a microtubular cell consisting of a thin (GDC) electrolyte (thickness: below ) on a support NiO/GDC anode (1.8 mm outer diameter, wall thickness) with a functional cathode has been developed for intermediate/low temperature operation. The functional cathode was prepared by in situ infiltrating the electrochemically catalytic nano-Ag particles into the as-established thick cathode. The as-proposed Ag-impregnation route ensures a very homogeneous particle dispersion and a good adhesion of Ag to the ceramic matrices. The cells were successfully operated to produce the maximum power densities of (, 0.32 V), (, 0.37 V), and (, 0.44 V) at , , and , respectively.
Development of Ceria Based SOFCs With a High Performance Composite Cathode
Liu, Y., Yasumoto, K., Hashimoto, S., Takei, K., Mori, M., Funahashi, Y., Fijishiro, Y., Hirano, A., and Takeda, Y. (August 17, 2010). "Development of Ceria Based SOFCs With a High Performance Composite Cathode." ASME. J. Fuel Cell Sci. Technol. December 2010; 7(6): 061003. https://doi.org/10.1115/1.3176220
Download citation file: