In this study, Hyosung demonstrates how a dual-cell structured polymer electrolyte membrane fuel cells (PEMFC) can guarantee the development of a stack with enlarged active area and cost innovation without a change in electrochemical performance and operation conditions. The insertion of insulation part within the bipolar plate and divided membrane electrode assemblies allowed the two individual cells in single layer. This enables the development of highly cost effective stack for PEMFC of a 1 kW class for residential power generators. The decrease in the number of layers can be represented as a cost reduction. We developed a stack of 24 layers with 48 cells, 48 V at open circuit voltage (OCV) and achieved a performance rating of 0.75 V per cell at 250 mA/cm2.
Skip Nav Destination
Article navigation
August 2013
This article was originally published in
Journal of Fuel Cell Science and Technology
Technical Briefs
Development of Dual-Cell Structured Polymer Electrolyte Membrane Fuel Cell Stack
Jong-Chul Hong,
Seong-Ho Han
Seong-Ho Han
e-mail: hshfc@hyosung.com
Hyosung Corporation,
Gyeonggi-Do, 431-080
Power & Industrial Systems R&D Center
,Hyosung Corporation,
Gyeonggi-Do, 431-080
South Korea
Search for other works by this author on:
Hwa-Seob Song
e-mail: mrsong1@hyosung.com
Jong-Chul Hong
e-mail: jongchulhong@hyosung.com
Gyu-Jin Jang
e-mail: ejang@hyosung.com
Hui-Jeong Son
e-mail: july22@hyosung.com
Seong-Ho Han
e-mail: hshfc@hyosung.com
Hyosung Corporation,
Gyeonggi-Do, 431-080
Power & Industrial Systems R&D Center
,Hyosung Corporation,
Gyeonggi-Do, 431-080
South Korea
Contributed by the Advance Energy Systems Division of ASME for publication in the Journal of Fuel Cell Science and Technology. Manuscript received October 26, 2012; final manuscript received April 16, 2013; published online June 17, 2013. Assoc. Editor: Ken Reifsnider.
J. Fuel Cell Sci. Technol. Aug 2013, 10(4): 044502 (3 pages)
Published Online: June 17, 2013
Article history
Received:
October 26, 2012
Revision Received:
April 16, 2013
Accepted:
May 15, 2013
Citation
Song, H., Hong, J., Jang, G., Son, H., and Han, S. (June 17, 2013). "Development of Dual-Cell Structured Polymer Electrolyte Membrane Fuel Cell Stack." ASME. J. Fuel Cell Sci. Technol. August 2013; 10(4): 044502. https://doi.org/10.1115/1.4024568
Download citation file:
33
Views
Get Email Alerts
Cited By
Exhaust gas composition of lignin reactions in molten carbonate salt of Direct Carbon Fuel Cell (DCFC) using Factsage
J. Electrochem. En. Conv. Stor
Effect of SiO2 coating on microstructure and electrochemical properties of LiNi0.5Mn1.5O4 cathode material
J. Electrochem. En. Conv. Stor
Modified Silicon Anode for Improved Low Temperature Performance of Lithium-ion Batteries
J. Electrochem. En. Conv. Stor
Optimization on Composition and Structure of Catalyst Layer for High-Temperature Polymer Electrolyte Membrane Fuel Cells
J. Electrochem. En. Conv. Stor (November 2023)
Related Articles
Inversion-Based Control of a Proton Exchange Membrane Fuel Cell System Using Energetic Macroscopic Representation
J. Fuel Cell Sci. Technol (May,2009)
PBI / H 3 PO 4 Gel Based Polymer Electrolyte Membrane Fuel Cells Under the Influence of Reformates
J. Fuel Cell Sci. Technol (February,2010)
Transient Heat Transfer for Layered Ceramic Insulation and Stainless Foil Fire Barriers
J. Heat Transfer (November,1999)
Diagnostics and Life-Cycle Assessment of Medium-Voltage Cables in Nuclear Power Plants During Regular Overhaul Process
ASME J of Nuclear Rad Sci (October,2016)
Related Proceedings Papers
Related Chapters
Calculation of VFTOs Caused by Multi-Reignitions of Disconnector
International Symposium on Information Engineering and Electronic Commerce, 3rd (IEEC 2011)
Pressure Testing
Process Piping: The Complete Guide to ASME B31.3, Third Edition
Special Thermal Problems
Pipe Stress Engineering