Sulfonated polyimide (SPI) based membranes for proton exchange membrane fuel cells (PEMFC) have been synthesized by using a one-step high temperature polymerization method. The membranes were characterized with Fourier transform infrared spectra (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC); water uptake, ion-exchange capacity, proton conductivity and mechanical stability were tested. The results showed that the membranes had good thermal and mechanical stability and exhibited good performance when they were assembled into membrane electrode assemblies (MEAs). Fuel cell testing was performed. The SPI copolymer based MEA was tested under different hydrogen flow rates to compare with the commercially available Nafion® based MEA.
Skip Nav Destination
Article navigation
August 2013
This article was originally published in
Journal of Fuel Cell Science and Technology
Research-Article
Synthesis and Characterization of Sulfonated Polyimide Based Membranes for Proton Exchange Membrane Fuel Cells
Hai Zheng
Hai Zheng
Polymer and Fiber Engineering Department
, Auburn University, Auburn, AL 36849
Search for other works by this author on:
Hai Zheng
Polymer and Fiber Engineering Department
, Auburn University, Auburn, AL 36849
Contributed by the Advanced Energy Systems Division of ASME for publication in the Journal of Fuel Cell Science and Technology. Manuscript received July 26, 2010; final manuscript received April 22, 2013; published online June 17, 2013. Assoc. Editor: Abel Hernandez.
J. Fuel Cell Sci. Technol. Aug 2013, 10(4): 041001 (5 pages)
Published Online: June 17, 2013
Article history
Received:
July 26, 2010
Revision Received:
April 22, 2013
Citation
Adanur, S., and Zheng, H. (June 17, 2013). "Synthesis and Characterization of Sulfonated Polyimide Based Membranes for Proton Exchange Membrane Fuel Cells." ASME. J. Fuel Cell Sci. Technol. August 2013; 10(4): 041001. https://doi.org/10.1115/1.4024564
Download citation file:
Get Email Alerts
Cited By
Exhaust gas composition of lignin reactions in molten carbonate salt of Direct Carbon Fuel Cell (DCFC) using Factsage
J. Electrochem. En. Conv. Stor
Effect of SiO2 coating on microstructure and electrochemical properties of LiNi0.5Mn1.5O4 cathode material
J. Electrochem. En. Conv. Stor
Modified Silicon Anode for Improved Low Temperature Performance of Lithium-ion Batteries
J. Electrochem. En. Conv. Stor
Optimization on Composition and Structure of Catalyst Layer for High-Temperature Polymer Electrolyte Membrane Fuel Cells
J. Electrochem. En. Conv. Stor (November 2023)
Related Articles
Synthesis of Proton Conducting and Highly Stable PWA-ZRP-Doped Composite Membrane for Proton Exchange Membrane Fuel Cell
J. Electrochem. En. Conv. Stor (May,2023)
Transport Phenomena Analysis in Proton Exchange Membrane Fuel Cells
J. Heat Transfer (December,2005)
Influence of Sulfonationity of Epoxy-Based Semi-Interpenetrating Polymer Networks of Sulfonated Polyimides as Proton Exchange Membranes on the Performance of Fuel Cell Application
J. Fuel Cell Sci. Technol (April,2010)
Simplified Model to Predict Incipient Flooding/Dehydration in Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol (August,2007)
Related Proceedings Papers
Related Chapters
Various Applications of the Membrane Theory
Stress in ASME Pressure Vessels, Boilers, and Nuclear Components
Makeup Water Treatment Plant Start-Up
Consensus on Pre-Commissioning Stages for Cogeneration and Combined Cycle Power Plants
Experiment Study on the Current Density Distribution of PEMFC
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)