The need for improvements in the on-line estimation of engine performance variables is greater nowadays as a result of more stringent emission control legislation. There is also a concurrent requirement for improved on-board diagnostics to detect different types of malfunctions. For example, recent California Air Resources Board (CARB) regulations mandate continuous monitoring of misfires, a problem which, short of an expensive measurement of combustion pressure in each cylinder, is most directly approached by estimating individual cylinder torque. This paper describes the theory and experimental results of a method for the estimation of individual cylinder torque in automative engines, with the intent of satisfying the CARB misfire detection requirements. Estimation, control, and diagnostic functions associated with automotive engines involve near periodic processes, due to the nature of multi-cylinder engines. The model of the engine dynamics used in this study fully exploits the inherent periodicity of the combustion process in the crank angle domain in order to obtain a simple deconvolution method for the estimation of the mean torque produced by each cylinder during each stroke from a measurement of crankshaft angular velocity. The deconvolution is actually performed in the spatial frequency domain, recognizing that the combustion energy is concentrated at discrete spatial frequencies, which are harmonics of the frequency of rotation of the crankshaft. Thus, the resulting deconvolution algorithm is independent of engine speed, and reduces to an algebraic operation in the frequency domain. It is necessary to perform a Discrete Fourier Transform (DFT) on the measured angular velocity signal, sampled at fixed uniform crank angle intervals. The paper discusses the model used in the study, and the experimental validation of the algorithm, which has been implemented in real time using a portable computer and has been tested extensively on different production vehicles on a chassis dynamometer and on the road.

This content is only available via PDF.
You do not currently have access to this content.