Skip Nav Destination
Issues
February 2006
ISSN 0148-0731
EISSN 1528-8951
Technical Papers
Bone/Orthopedics
Comparison of the Linear Finite Element Prediction of Deformation and Strain of Human Cancellous Bone to 3D Digital Volume Correlation Measurements
J Biomech Eng. February 2006, 128(1): 1–6.
doi: https://doi.org/10.1115/1.2146001
Cortical Bone Viscoelasticity and Fixation Strength of Press-Fit Femoral Stems: A Finite Element Model
J Biomech Eng. February 2006, 128(1): 7–12.
doi: https://doi.org/10.1115/1.2133765
Topics:
Bone
,
Press fits
,
Stress
,
Viscoelasticity
,
Friction
,
Finite element model
Cortical Bone Viscoelasticity and Fixation Strength of Press-Fit Femoral Stems: An In-Vitro Model
J Biomech Eng. February 2006, 128(1): 13–17.
doi: https://doi.org/10.1115/1.2133766
Topics:
Bone
,
Press fits
,
Stress
,
Viscoelasticity
Effect of Loading Rate on the Compressive Mechanics of the Immature Baboon Cervical Spine
J Biomech Eng. February 2006, 128(1): 18–23.
doi: https://doi.org/10.1115/1.2133767
Topics:
Cervical spine
,
Displacement
,
Failure
,
Pediatrics
,
Stiffness
,
Stress
,
Testing
,
Wounds
Determination of Ultrasound Phase Velocity in Trabecular Bone Using Time Dependent Phase Tracking Technique
J Biomech Eng. February 2006, 128(1): 24–29.
doi: https://doi.org/10.1115/1.2132369
Topics:
Bone
,
Signals
,
Ultrasound
,
Ultraviolet radiation
,
Stiffness
,
Algorithms
,
Errors
,
Phantoms
,
Delays
Fluids/Heat/Transport
Flow and Thrombosis at Orifices Simulating Mechanical Heart Valve Leakage Regions
J Biomech Eng. February 2006, 128(1): 30–39.
doi: https://doi.org/10.1115/1.2133768
Topics:
Blood
,
Flow (Dynamics)
,
Leakage
,
Orifices
,
Platelets
,
Thrombosis
,
Heart valve prostheses
,
Hinges
,
Shear stress
Comparison of Left Anterior Descending Coronary Artery Hemodynamics Before and After Angioplasty
S. D. Ramaswamy, S. C. Vigmostad, A. Wahle, Y.-G. Lai, M. E. Olszewski, K. C. Braddy, T. M. H. Brennan, J. D. Rossen, M. Sonka, K. B. Chandran
J Biomech Eng. February 2006, 128(1): 40–48.
doi: https://doi.org/10.1115/1.2132371
Two-Phase Computerized Planning of Cryosurgery Using Bubble-Packing and Force-Field Analogy
J Biomech Eng. February 2006, 128(1): 49–58.
doi: https://doi.org/10.1115/1.2136166
Topics:
Bubbles
,
Optimization
,
Packing (Shipments)
,
Packings (Cushioning)
,
Simulation
,
Biological tissues
,
Freezing
,
Bioheat transfer
Effects of Major Endoleaks on a Stented Abdominal Aortic Aneurysm
J Biomech Eng. February 2006, 128(1): 59–68.
doi: https://doi.org/10.1115/1.2132376
An Axisymmetric Single-Path Model for Gas Transport in the Conducting Airways
J Biomech Eng. February 2006, 128(1): 69–75.
doi: https://doi.org/10.1115/1.2133762
Topics:
Finite element analysis
,
Flow (Dynamics)
,
Leakage
,
Lung
,
Pressure
,
Simulation
,
Diffusion (Physics)
,
Bifurcation
,
Engineering simulation
Numerical Modeling of In Vivo Plate Electroporation Thermal Dose Assessment
J Biomech Eng. February 2006, 128(1): 76–84.
doi: https://doi.org/10.1115/1.2132375
Topics:
Biological tissues
,
Blood
,
Blood vessels
,
Damage
,
Electric fields
,
Electrodes
,
Electroporation
,
Liver
,
Temperature
,
Vessels
Pulsatile Flow and Mass Transport Over an Array of Cylinders: Gas Transfer in a Cardiac-Driven Artificial Lung
J Biomech Eng. February 2006, 128(1): 85–96.
doi: https://doi.org/10.1115/1.2133761
Topics:
Artificial lungs
,
Cycles
,
Cylinders
,
Fibers
,
Flow (Dynamics)
,
Fluids
,
Geometry
,
Oscillations
,
Porosity
,
Pulsatile flow
A New Drift-Flux Model for Particle Transport and Deposition in Human Airways
J Biomech Eng. February 2006, 128(1): 97–105.
doi: https://doi.org/10.1115/1.2133763
Topics:
Particulate matter
,
Bifurcation
Effect of Anatomical Fine Structure on the Flow of Cerebrospinal Fluid in the Spinal Subarachnoid Space
J Biomech Eng. February 2006, 128(1): 106–114.
doi: https://doi.org/10.1115/1.2132372
Topics:
Flow (Dynamics)
Joint/Whole Body
3D Finite Element Model of Meniscectomy: Changes in Joint Contact Behavior
J Biomech Eng. February 2006, 128(1): 115–123.
doi: https://doi.org/10.1115/1.2132370
Topics:
Biological tissues
,
Cartilage
,
Finite element model
,
Knee
,
Pressure
,
Stress
,
Surgery
,
Finite element analysis
Soft Tissue
A Penetration-Based Finite Element Method for Hyperelastic 3D Biphasic Tissues in Contact: Part 1-Derivation of Contact Boundary Conditions
J Biomech Eng. February 2006, 128(1): 124–130.
doi: https://doi.org/10.1115/1.2133769
Frictional Response of Bovine Articular Cartilage Under Creep Loading Following Proteoglycan Digestion With Chondroitinase ABC
J Biomech Eng. February 2006, 128(1): 131–134.
doi: https://doi.org/10.1115/1.2133764
Stresses and Strains in the Medial Meniscus of an ACL Deficient Knee under Anterior Loading: A Finite Element Analysis with Image-Based Experimental Validation
J Biomech Eng. February 2006, 128(1): 135–141.
doi: https://doi.org/10.1115/1.2132373
A Theoretical Model of Enlarging Intracranial Fusiform Aneurysms
J Biomech Eng. February 2006, 128(1): 142–149.
doi: https://doi.org/10.1115/1.2132374
Topics:
Aneurysms
,
Stress
,
Fibers
,
Biomechanics
Biomechanical Modeling of Refractive Corneal Surgery
J Biomech Eng. February 2006, 128(1): 150–160.
doi: https://doi.org/10.1115/1.2132368
Technical Brief
Evaluation of Filler Materials Used for Uniform Load Distribution at Boundaries During Structural Biomechanical Testing of Whole Vertebrae
Do-Gyoon Kim, Ph.D., X. Neil Dong, Ph.D., Ting Cao, M. Sc., Kevin C. Baker, Richard R. Shaffer, David P. Fyhrie, Ph.D., Yener N. Yeni, Ph.D.
J Biomech Eng. February 2006, 128(1): 161–165.
doi: https://doi.org/10.1115/1.2133770
Topics:
Biomechanics
,
Bone
,
Fillers (Materials)
,
Finite element analysis
,
Mechanical properties
,
Mechanical testing
,
Metals
,
Stiffness
,
Stress
,
Testing