The maximum pore fluid pressures due to uniaxial compression are determined for both the vascular porosity (Haversian and Volkmann’s canals) and the lacunar–canalicular porosity of live cortical bone. It is estimated that the peak pore water pressure will be 19 percent of the applied axial stress in the vascular porosity and 12 percent of the applied axial stress in the lacunar–canalicular porosity for an impulsive step loading. However, the estimated relaxation time for the vascular porosity (1.36 μs) is three orders of magnitude faster than that estimated for the lacunar–canalicular porosity (4.9 ms). Thus, under physiological loading, which has a stress rise time generally larger than 1 ms, pressures higher than the vascular pressure cannot be sustained in the vascular porosity due to the swift pressure relaxation in this porosity (unless the fluid drainage through the boundary is obstructed). The model also predicts a slight hydraulic stiffening of the bulk modulus due to longer draining time of the lacunar–canalicular porosity. The undrained bulk modulus is 6 percent higher than the drained bulk modulus in this case.
Skip Nav Destination
Article navigation
December 1998
Research Papers
Estimates of the Peak Pressures in Bone Pore Water
D. Zhang,
D. Zhang
Center for Biomedical Engineering, CUNY Graduate School, and Department of Mechanical Engineering, The City College of New York, 140th St. and Convent Ave., New York, NY 10031
Search for other works by this author on:
S. Weinbaum,
S. Weinbaum
Center for Biomedical Engineering, CUNY Graduate School, and Department of Mechanical Engineering, The City College of New York, 140th St. and Convent Ave., New York, NY 10031
Search for other works by this author on:
S. C. Cowin
S. C. Cowin
Center for Biomedical Engineering, CUNY Graduate School, and Department of Mechanical Engineering, The City College of New York, 140th St. and Convent Ave., New York, NY 10031
Search for other works by this author on:
D. Zhang
Center for Biomedical Engineering, CUNY Graduate School, and Department of Mechanical Engineering, The City College of New York, 140th St. and Convent Ave., New York, NY 10031
S. Weinbaum
Center for Biomedical Engineering, CUNY Graduate School, and Department of Mechanical Engineering, The City College of New York, 140th St. and Convent Ave., New York, NY 10031
S. C. Cowin
Center for Biomedical Engineering, CUNY Graduate School, and Department of Mechanical Engineering, The City College of New York, 140th St. and Convent Ave., New York, NY 10031
J Biomech Eng. Dec 1998, 120(6): 697-703 (7 pages)
Published Online: December 1, 1998
Article history
Received:
February 12, 1998
Revised:
July 22, 1998
Online:
January 23, 2008
Citation
Zhang, D., Weinbaum, S., and Cowin, S. C. (December 1, 1998). "Estimates of the Peak Pressures in Bone Pore Water." ASME. J Biomech Eng. December 1998; 120(6): 697–703. https://doi.org/10.1115/1.2834881
Download citation file:
Get Email Alerts
Simulating the Growth of TATA-Box Binding Protein-Associated Factor 15 Inclusions in Neuron Soma
J Biomech Eng (December 2024)
Effect of Structure and Wearing Modes on the Protective Performance of Industrial Safety Helmet
J Biomech Eng (December 2024)
Sex-Based Differences and Asymmetry in Hip Kinematics During Unilateral Extension From Deep Hip Flexion
J Biomech Eng (December 2024)
Related Articles
Micromechanically Based Poroelastic Modeling of Fluid Flow in Haversian Bone
J Biomech Eng (February,2003)
A Finite Element Analysis of the Indentation Stress-Relaxation Response of Linear Biphasic Articular Cartilage
J Biomech Eng (May,1992)
Experimental Determination of the Permeability in the Lacunar-Canalicular Porosity of Bone
J Biomech Eng (October,2009)
Related Proceedings Papers
Related Chapters
A Review on Prediction over Pressured Zone in Hydrocarbon Well Using Seismic Travel Time through Artificial Intelligence Technique for Pre-Drilling Planing
International Conference on Software Technology and Engineering, 3rd (ICSTE 2011)
Completing the Picture
Air Engines: The History, Science, and Reality of the Perfect Engine
Later Single-Cylinder Engines
Air Engines: The History, Science, and Reality of the Perfect Engine