The nonlinear indentation response of hydrated articular cartilage at phsiologically relevant rates of mechanical loading is studied using a two-phase continuum model of the tissue based on the theory of mixtures under finite deformation. The matrix equations corresponding to the governing mixture equations for this nonlinear problem are derived using a total Lagrangian penalty finite element method, and solved using a predictor-corrector iteration within a modified Newton-Raphson scheme. The stress relaxation indentation problem is examined using either a porous (free draining) indenter or solid (impermeable) indenter under fast and slow compression rates. The creep indentation problem is studied using a porous indenter. We examine the finite deformation response and compare with the response obtained using the linear infinitesimal response. Differences between the finite deformation response and the linear response are shown to be significant when the compression rate is fast or when the indenter is impermeable. The finite deformation model has a larger ratio of peak-to-equilibrium reaction force, and higher relaxation rate than the linear model during the early relaxation period, but a similar relaxation time. The finite deformation model predicts a slower creep rate than the linear model, as well as a smaller equilibrium creep displacement. The pressure distribution below the indenter, particularly near the loaded surface is also larger with the finite deformation model.
Skip Nav Destination
Article navigation
February 1994
Research Papers
Indentation Analysis of Biphasic Articular Cartilage: Nonlinear Phenomena Under Finite Deformation
Jun-Kyo Suh,
Jun-Kyo Suh
Musculoskeletal Research Center, Department of Orthopaedic Research, University of Pittsburgh, Pittsburgh, PA 15213
Search for other works by this author on:
Robert L. Spilker
Robert L. Spilker
Department of Mechanical Engineering, Aeronautical Engineering, and Mechanics, Rensselaer Polytechnic Institute, Troy, NY 12180-3590
Search for other works by this author on:
Jun-Kyo Suh
Musculoskeletal Research Center, Department of Orthopaedic Research, University of Pittsburgh, Pittsburgh, PA 15213
Robert L. Spilker
Department of Mechanical Engineering, Aeronautical Engineering, and Mechanics, Rensselaer Polytechnic Institute, Troy, NY 12180-3590
J Biomech Eng. Feb 1994, 116(1): 1-9 (9 pages)
Published Online: February 1, 1994
Article history
Received:
February 20, 1992
Revised:
March 5, 1992
Online:
March 17, 2008
Citation
Suh, J., and Spilker, R. L. (February 1, 1994). "Indentation Analysis of Biphasic Articular Cartilage: Nonlinear Phenomena Under Finite Deformation." ASME. J Biomech Eng. February 1994; 116(1): 1–9. https://doi.org/10.1115/1.2895700
Download citation file:
Get Email Alerts
Simulating the Growth of TATA-Box Binding Protein-Associated Factor 15 Inclusions in Neuron Soma
J Biomech Eng (December 2024)
Effect of Structure and Wearing Modes on the Protective Performance of Industrial Safety Helmet
J Biomech Eng (December 2024)
Sex-Based Differences and Asymmetry in Hip Kinematics During Unilateral Extension From Deep Hip Flexion
J Biomech Eng (December 2024)
Related Articles
Estimation of in Situ Elastic Properties of Biphasic Cartilage Based on a Transversely Isotropic Hypo-Elastic Model
J Biomech Eng (February,2000)
Unconfined Compression of Articular Cartilage: Nonlinear Behavior and Comparison With a Fibril-Reinforced Biphasic Model
J Biomech Eng (April,2000)
Experimental Verification of the Roles of Intrinsic Matrix Viscoelasticity and Tension-Compression Nonlinearity in the Biphasic Response of Cartilage
J Biomech Eng (February,2003)
An Analysis of the Unconfined Compression of Articular Cartilage
J Biomech Eng (May,1984)
Related Proceedings Papers
Related Chapters
Basic Concepts
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range
Members in Compression
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range
Compressive Deformation of Hot-Applied Rubberized Asphalt Waterproofing
Roofing Research and Standards Development: 10th Volume