Guided by the experimental observations in the literature, this paper discusses two possible modes of defect growth in soft solids for which the size-dependent fracture mechanics is not always applicable. One is omni-directional growth, in which the cavity expands irreversibly in all directions; and the other is localized cracking along a plane. A characteristic material length is introduced, which may shed light on the dominant growth mode for defects of different sizes. To help determine the associated material properties from experimental measurement, the driving force of defect growth as a function of the remote load is calculated for both modes accordingly. Consequently, one may relate the measured critical load to the critical driving force and eventually to the associated material parameters. For comprehensiveness, the calculations here cover a class of hyperelastic materials. As an application of the proposed hypothesis, the experimental results (Cristiano et al., 2010, “An Experimental Investigation of Fracture by Cavitation of Model Elastomeric Networks,” J. Polym. Sci. Part B: Polym. Phys., 48(13), pp. 1409–1422) from two polymers with long and short chain elastomeric network are examined. The two polymers seem to be susceptible to either of the two dominating modes, respectively. The results are interpreted, and the material characteristic length and other growth parameters are determined.
Issue Section:
Research Papers
References
1.
Smith
, T. L.
, 1970
, “Rupture Processes in Polymers
,” Pure Appl. Chem.
, 23
(2–3
), pp. 235
–254
.2.
Thomas
, A. G.
, 1974
, “Factors Influencing the Strength of Rubbers
,” J. Polym. Sci.: Polym. Symp.
, 48
(1), pp. 145
–157
.3.
Gent
, A.
, and Lindley
, P.
, 1959
, “Internal Rupture of Bonded Rubber Cylinders in Tension
,” Proc. R. Soc. London A: Math., Phys. Eng. Sci.
, 249
(1257), pp. 195
–205
.4.
Crosby
, A. J.
, Shull
, K. R.
, Lakrout
, H.
, and Creton
, C.
, 2000
, “Deformation and Failure Modes of Adhesively Bonded Elastic Layers
,” J. Appl. Phys.
, 88
(5
), pp. 2956
–2966
.5.
Brown
, K.
, and Creton
, C.
, 2002
, “Nucleation and Growth of Cavities in Soft Viscoelastic Layers Under Tensile Stress
,” Eur. Phys. J. E
, 9
(1
), pp. 35
–40
.6.
Dorfmann
, A.
, 2003
, “Stress Softening of Elastomers in Hydrostatic Tension
,” Acta Mech.
, 165
(3–4
), pp. 117
–137
.7.
Bayraktar
, E.
, Bessri
, K.
, and Bathias
, C.
, 2008
, “Deformation Behaviour of Elastomeric Matrix Composites Under Static Loading Conditions
,” Eng. Fract. Mech.
, 75
(9
), pp. 2695
–2706
.8.
Lefèvre
, V.
, Danas
, K.
, and Lopez-Pamies
, O.
, 2017
, “A General Result for the Magnetoelastic Response of Isotropic Suspensions of Iron and Ferrofluid Particles in Rubber, With Applications to Spherical and Cylindrical Specimens
,” J. Mech. Phys. Solids
, 107
, pp. 343
–364
.9.
James
, R. D.
, and Spector
, S. J.
, 1991
, “The Formation of Filamentary Voids in Solids
,” J. Mech. Phys. Solids
, 39
(6
), pp. 783
–813
.10.
Hang-Sheng
, H.
, and Abeyaratne
, R.
, 1992
, “Cavitation in Elastic and Elastic-Plastic Solids
,” J. Mech. Phys. Solids
, 40
(3
), pp. 571
–592
.11.
Dollhofer
, J.
, Chiche
, A.
, Muralidharan
, V.
, Creton
, C.
, and Hui
, C.
, 2004
, “Surface Energy Effects for Cavity Growth and Nucleation in an Incompressible Neo-Hookean Material—-Modeling and Experiment
,” Int. J. Solids Struct.
, 41
(22
), pp. 6111
–6127
.12.
Biwa
, S.
, 2006
, “Cavitation in Finite Elasticity With Surface Energy Effects
,” Int. J. Non-Linear Mech.
, 41
(9
), pp. 1084
–1094
.13.
Lopez-Pamies
, O.
, Idiart
, M. I.
, and Nakamura
, T.
, 2011
, “Cavitation in Elastomeric Solids: I—A Defect-Growth Theory
,” J. Mech. Phys. Solids
, 59
(8
), pp. 1464
–1487
.14.
Fan
, C.
, Jar
, P.-Y. B.
, and Cheng
, J. R.
, 2007
, “Prediction of Energy Release Rates for Crack Growth Using Fem-Based Energy Derivative Technique
,” Eng. Fract. Mech.
, 74
(8
), pp. 1243
–1254
.15.
Krishnan
, V. R.
, Hui
, C. Y.
, and Long
, R.
, 2008
, “Finite Strain Crack Tip Fields in Soft Incompressible Elastic Solids
,” Langmuir
, 24
(24
), pp. 14245
–14253
.16.
Nait-Abdelaziz
, M.
, Zairi
, F.
, Qu
, Z.
, Hamdi
, A.
, and Hocine
, N. A.
, 2012
, “J Integral as a Fracture Criterion of Rubber-like Materials Using the Intrinsic Defect Concept
,” Mech. Mater.
, 53
, pp. 80
–90
.17.
Extrand
, C.
, and Gent
, A.
, 1991
, “Strength Under Various Modes of Deformation
,” Int. J. Fract.
, 48
(4
), pp. 281
–297
.18.
Lin
, Y.-Y.
, and Hui
, C.-Y.
, 2004
, “Cavity Growth From Crack-like Defects in Soft Materials
,” Int. J. Fract.
, 126
(3
), pp. 205
–221
.19.
Ait-Bachir
, M.
, Mars
, W.
, and Verron
, E.
, 2012
, “Energy Release Rate of Small Cracks in Hyperelastic Materials
,” Int. J. Non-Linear Mech.
, 47
(4
), pp. 22
–29
.20.
Ball
, J. M.
, 1982
, “Discontinuous Equilibrium Solutions and Cavitation in Nonlinear Elasticity
,” Philos. Trans. R. Soc. London A: Math., Phys. Eng. Sci.
, 306
(1496
), pp. 557
–611
.21.
Mooney
, M.
, 1940
, “A Theory of Large Elastic Deformation
,” J. Appl. Phys.
, 11
(9
), pp. 582
–592
.22.
Gent
, A.
, and Tompkins
, D.
, 1969
, “Nucleation and Growth of Gas Bubbles in Elastomers
,” J. Appl. Phys.
, 40
(6
), pp. 2520
–2525
.23.
Williams
, M.
, and Schapery
, R.
, 1965
, “Spherical Flaw Instability in Hydrostatic Tension
,” Int. J. Fract. Mech.
, 1
(1
), pp. 64
–72
.24.
Diani
, J.
, 2001
, “Irreversible Growth of a Spherical Cavity in Rubber-like Material: A Fracture Mechanics Description
,” Int. J. Fract.
, 112
(2
), pp. 151
–161
.25.
Lake
, G.
, 1995
, “Fatigue and Fracture of Elastomers
,” Rubber Chem. Technol.
, 68
(3
), pp. 435
–460
.26.
Yeoh
, O.
, 2002
, “Relation Between Crack Surface Displacements and Strain Energy Release Rate in Thin Rubber Sheets
,” Mech. Mater.
, 34
(8
), pp. 459
–474
.27.
Gent
, A.
, and Wang
, C.
, 1991
, “Fracture Mechanics and Cavitation in Rubber-like Solids
,” J. Mater. Sci.
, 26
(12
), pp. 3392
–3395
.28.
Long
, R.
, and Hui
, C.-Y.
, 2010
, “Effects of Triaxiality on the Growth of Crack-Like Cavities in Soft Incompressible Elastic Solids
,” Soft Matter
, 6
(6
), pp. 1238
–1245
.29.
Cristiano
, A.
, Marcellan
, A.
, Long
, R.
, Hui
, C.-Y.
, Stolk
, J.
, and Creton
, C.
, 2010
, “An Experimental Investigation of Fracture by Cavitation of Model Elastomeric Networks
,” J. Polym. Sci. Part B: Polym. Phys.
, 48
(13
), pp. 1409
–1422
.30.
Gent
, A.
, 1990
, “Cavitation in Rubber: A Cautionary Tale
,” Rubber Chem. Technol.
, 63
(3
), pp. 49
–53
.31.
Fu
, Y. B.
, and Ogden
, R. W.
, 2001
, Nonlinear Elasticity: Theory and Applications
, Vol. 283
, Cambridge University Press
, Cambridge, UK
.32.
Green
, A. E.
, and Zerna
, W.
, 1992
, Theoretical Elasticity
, Courier Corporation
, New York
.33.
Zhu
, J.
, Li
, T.
, Cai
, S.
, and Suo
, Z.
, 2011
, “Snap-Through Expansion of a Gas Bubble in an Elastomer
,” J. Adhes.
, 87
(5
), pp. 466
–481
.34.
Gent
, A.
, and Thomas
, A.
, 1958
, “Forms for the Stored (Strain) Energy Function for Vulcanized Rubber
,” J. Polym. Sci.
, 28
(118
), pp. 625
–628
.35.
Seitz
, M. E.
, Martina
, D.
, Baumberger
, T.
, Krishnan
, V. R.
, Hui
, C.-Y.
, and Shull
, K. R.
, 2009
, “Fracture and Large Strain Behavior of Self-Assembled Triblock Copolymer Gels
,” Soft Matter
, 5
(2
), pp. 447
–456
.36.
Gent
, A.
, 1996
, “A New Constitutive Relation for Rubber
,” Rubber Chem. Technol.
, 69
(1
), pp. 59
–61
.37.
Arruda
, E. M.
, and Boyce
, M. C.
, 1993
, “A Three-Dimensional Constitutive Model for the Large Stretch Behavior of Rubber Elastic Materials
,” J. Mech. Phys. Solids
, 41
(2
), pp. 389
–412
.Copyright © 2018 by ASME
You do not currently have access to this content.
