An investigation was performed to determine the fracture patterns produced by localized impulsive loading on brittle plates and their dependence on the intensity and area of the load. Experiments were performed on effectively infinite plates loaded over a finite area with sheet explosive. The mechanisms, location, and time sequence of deformation and fracture were determined by terminal observation, high-speed framing camera photographs, and strain gages. It was found that all fractures were initiated by bending stress; two different fracture patterns in plates were produced experimentally. The plate response was also predicted analytically by numerically integrating the characteristic equations of Mindlin plate theory. It was found analytically that, depending on loading intensity and duration, a total of five fracture patterns in plates, including both those observed experimentally, can be produced by localized impulsive loads.
Skip Nav Destination
Multiple Fracture of Plates Under Localized Impulsive Loading
J. D. Colton
Engineering Mechanics Group, Poulter Laboratory, Stanford Research Institute, Menlo Park, Calif.
- Views Icon Views
- Share Icon Share
- Search Site
Colton, J. D. (March 1, 1976). "Multiple Fracture of Plates Under Localized Impulsive Loading." ASME. J. Appl. Mech. March 1976; 43(1): 33–38. https://doi.org/10.1115/1.3423791
Download citation file:
Get Email Alerts
Nonlinear Oscillations of Dielectric Elastomer Actuators With Stretch-Dependent Permittivity
J. Appl. Mech (November 2022)
Moiré Tuning of the Dynamic Behavior of a Twisted Bilayer van der Waals Material Resonator
J. Appl. Mech (December 2022)