Surface with hierarchical structures to enhance heat transfer performance has been investigated for decades. Here we present a unique two-stage vaporization phenomenon observed when the heated surface is covered to confine the thickness of liquid film. This multi-stage vaporization will be critical for optimization applications in thermal management. The hierarchical surface is prepared using: a) isotropic etching to form micro-pillars, and b) wet-chemical etching to produce silicon nanowires (SiNWs) on sidewalls of micro-pillars. Oxygen plasma was applied to modify their surface wettability from superhydrophobic to superhydrophilic. A glass slide was placed right on top of the structures, covering about half of the heated surface, and mechanically clamped by a stainless-steel block. Therefore, the liquid film is about the same height as the micro-pillars. The hierarchical surface was wetted with deionized water before being heated. There are two clear and separate stages that were observed under an high-speed camera: i) thinning while liquid is vaporizing, and ii) mixture of vaporizing and condensation until total dry-out happens. The detailed dynamics of this two-stage vaporization were explored and reported in this study.
- Heat Transfer Division
Two-Stage Phase Change Phenomenon of Water on Covered Hierarchical Structures
- Views Icon Views
- Share Icon Share
- Search Site
Chen, H, Zhou, Z, & Chen, C. "Two-Stage Phase Change Phenomenon of Water on Covered Hierarchical Structures." Proceedings of the ASME 2013 4th International Conference on Micro/Nanoscale Heat and Mass Transfer. ASME 2013 4th International Conference on Micro/Nanoscale Heat and Mass Transfer. Hong Kong, China. December 11–14, 2013. V001T12A002. ASME. https://doi.org/10.1115/MNHMT2013-22071
Download citation file: