Skip Nav Destination
1-6 of 6
Keywords: fracture toughnessClose
Proc. ASME. IPC2020, Volume 1: Pipeline and Facilities Integrity, V001T03A010, September 28–30, 2020
Paper No: IPC2020-9389
...Abstract Abstract In order for the pipeline industry to usher in the next-level fracture mechanics engineering analysis, reasonable and prudent fracture toughness characterizations are needed to improve burst pressure predictions and fatigue crack growth analysis of pipelines with planar cracks...
Proc. ASME. IPC2020, Volume 3: Operations, Monitoring, and Maintenance; Materials and Joining, V003T05A012, September 28–30, 2020
Paper No: IPC2020-9255
... the effectiveness of an ILI-crack-tool integrity assessment of a pipeline comprised of LF or DC welded ERW seams by reducing the number of unnecessary excavations while still being able to find the critical defects with an acceptable level of confidence. Keywords: ERW pipe, fracture toughness, seam weld, defect...
Proc. ASME. IPC2010, 2010 8th International Pipeline Conference, Volume 2, 269-278, September 27–October 1, 2010
Paper No: IPC2010-31076
.... Some 8-mm DWTT specimens (N10 and N11 steels) were straightened using the wing-back technique and therefore no deformation was applied to the test section. The wing-back technique follows the straightening technique as used for fracture toughness testing of welds . Loading Rate Quasi-static tests...
Proc. ASME. IPC2008, 2008 7th International Pipeline Conference, Volume 3, 29-38, September 29–October 3, 2008
Paper No: IPC2008-64060
... between surface measurements and those from the S-SSM, and it was found that the CTOA decreased somewhat with increasing ligament size from 66 mm to 95 mm. Transferability of results from lab to field will be discussed briefly. CTOA ductile fracture fracture toughness pipe steel test method...
Proc. ASME. IPC2002, 4th International Pipeline Conference, Parts A and B, 451-455, September 29–October 3, 2002
Paper No: IPC2002-27188
... of the Pipeline, such as limit load, fracture toughness and threshold defect sizes, etc. According to the research results, some advices are presented for design, maintenance and repair of the Pipeline. girth weld strength mismatch pipeline limit load fracture toughness Proceedings of IPC2002 ep I...
Proc. ASME. IPC2004, 2004 International Pipeline Conference, Volumes 1, 2, and 3, 1725-1732, October 4–8, 2004
Paper No: IPC2004-0192
... stress ductile fracture fracture toughness steel CTOA Proceedings of IPC 2004 International Pipeline Conference October 4 - 8, 2004 Calgary, Alberta, Canada IPC04-0192 FLOW BEHAVIOUR AND DUCTILE FRACTURE TOUGHNESS OF A HIGH TOUGHNESS STEEL S. Xu, R. Bouchard and W.R. Tyson CANMET-Materials...