0
Research Papers

Effectiveness of Phase Change Material for Cooling of Photovoltaic Panel for Hot Climate

[+] Author and Article Information
Adeel Waqas

Department of Thermal Science
and Energy Engineering,
University of Science and Technology of China,
96 Jinzhai Road,
Hefei City 230026, China;
Center for Advanced studies in Energy (CASEN),
National University of Science
and Technology (NUST),
H-12 Campus,
Islamabad 44000, Pakistan
e-mails: adeel12@ustc.edu.cn;
adeel@casen.nust.edu.pk

Ji Jie

Department of Thermal Science
and Energy Engineering,
University of Science and Technology of China,
96 Jinzhai Road,
Hefei City 230026, China
e-mail: jijie@ustc.edu.cn

1Corresponding author.

Contributed by the Solar Energy Division of ASME for publication in the JOURNAL OF SOLAR ENERGY ENGINEERING: INCLUDING WIND ENERGY AND BUILDING ENERGY CONSERVATION. Manuscript received June 28, 2017; final manuscript received February 19, 2018; published online March 27, 2018. Assoc. Editor: Ming Qu.

J. Sol. Energy Eng 140(4), 041006 (Mar 27, 2018) (10 pages) Paper No: SOL-17-1253; doi: 10.1115/1.4039550 History: Received June 28, 2017; Revised February 19, 2018

Phase change materials (PCMs) are investigated in this study as an option to reduce the surface temperature of the photovoltaic (PV) cell during sunshine hours to enhance the electrical efficiency of the cells. For this purpose, thermal energy balance model of the PV panel is integrated with PCM enthalpy model. The simulated results of the model have been validated with experimental results from the literature. The results indicate that PCM can be effectively used for limiting the temperature rise of the PV cell, thus increasing the efficiency of the PV cell up to 10%. Peak temperature of the PV cell can be reduced from 86 °C to 57 °C during the hottest summer month. It has observed that maximum benefits can be obtained when PCM melting point is selected in such a way that there is 10–12 °C difference between melting point of PCM and average minimum ambient temperature of the hottest summer month. PCM selected in such way will also require minimum mass. In current study, PCMs with melting points of 40 °C and 44 °C provide the best result compared to the PCMs having melting points of 35 °C and 30 °C with average minimum ambient temperature of 28 °C.

FIGURES IN THIS ARTICLE
<>
Copyright © 2018 by ASME
Your Session has timed out. Please sign back in to continue.

References

Islam, M. M. , Pandey, A. K. , Hasanuzzaman, M. , and Rahim, N. A. , 2016, “ Recent Progresses and Achievements in Photovoltaic-Phase Change Material Technology: A Review With Special Treatment on Photovoltaic Thermal-Phase Change Material Systems,” Energy Convers. Manage., 126, pp. 177–204. [CrossRef]
Browne, M. C. , Norton, B. , and McCormack, S. J. , 2015, “ Phase Change Materials for Photovoltaic Thermal Management,” Renewable Sustainable Energy Rev., 47, pp. 762–782. [CrossRef]
Browne, M. C. , Norton, B. , and McCormack, S. J. , 2016, “ Heat Retention of a Photovoltaic/Thermal Collector With PCM,” Sol. Energy, 133, pp. 533–548. [CrossRef]
Waqas, A. , and Phase, U. D. Z. , 2013, “ Change Material (PCM) Storage for Free Cooling of Buildings—A Review,” Renewable Sustainable Energy Rev., 18, pp. 607–625. [CrossRef]
Waqas, A. , Ali, M. , and Ud Din, Z. , 2017, “ Performance Analysis of Phase-Change Material Storage Unit for Both Heating and Cooling of Buildings,” Int. J. Sustainable Energy, 36(4), pp. 379–397. [CrossRef]
Maiti, S. , Banerjee, S. , Vyas, K. , Patel, P. , and Ghosh, P. K. , 2011, “ Self Regulation of Photovoltaic Module Temperature in V-Trough Using a Metal-Wax Composite Phase Change Matrix,” Sol. Energy, 85(9), pp. 1805–1816. [CrossRef]
Stropnik, R. , and Stritih, U. , 2016, “ Increasing the Efficiency of PV Panel With the Use of PCM,” Renewable Energy, 97, pp. 671–679. [CrossRef]
Kibria, M. A. , Saidur, R. , Al-Sulaiman, F. A. , and Aziz, M. M. A. , 2016, “ Development of a Thermal Model for a Hybrid Photovoltaic Module and Phase Change Materials Storage Integrated in Buildings,” Sol. Energy, 124, pp. 114–123. [CrossRef]
Lazaro, A. , Dolado, P. , Marín, M. , and Zalba, B. , 2009, “ PCM–Air Heat Exchangers for Free-Cooling Applications in Buildings: Experimental Results of Two Real-Scale Prototypes,” Energy Convers. Manage., 50(3), pp. 439–443. [CrossRef]
Joshi, A. S. , and Tiwari, A. , 2007, “ Energy and Exergy Efficiencies of a Hybrid Photovoltaic-Thermal (PV/T) Air Collector,” Renewable Energy, 32(13), pp. 2223–2241. [CrossRef]
Tiwari, A. , and Sodha, M. S. , 2006, “ Performance Evaluation of Solar PV/T System: An Experimental Validation,” Sol. Energy, 80(7), pp. 751–759. [CrossRef]
Solanki, S. C. , Dubey, S. , and Tiwari, A. , 2009, “ Indoor Simulation and Testing of Photovoltaic Thermal (PV/T) Air Collectors,” Appl. Energy, 86(11), pp. 2421–2428. [CrossRef]
Ho, C. J. , Tanuwijava, A. O. , and Lai, C. M. , 2012, “ Thermal and Electrical Performance of a BIPV Integrated With a Microencapsulated Phase Change Material Layer,” Energy Build., 50, pp. 331–338. [CrossRef]
Ji, J. , Liu, K. , Chow, T. T. , Pei, G. , He, W. , and He, H. , 2008, “ Performance Analysis of a Photovoltaic Heat Pump,” Appl. Energy, 85(8), pp. 680–693. [CrossRef]
Keliang, L. , Jie, J. , Tin-Tai, C. , Gang, P. , Hanfeng, H. , Aiguo, J. , and Jichun, Y. , 2009, “ Performance Study of a Photovoltaic Solar Assisted Heat Pump With Variable-Frequency Compressor—A Case Study in Tibet,” Renewable Energy, 34(12), pp. 2680–2687. [CrossRef]
Dubey, S. , and Tiwari, G. N. , 2008, “ Thermal Modeling of a Combined System of Photovoltaic Thermal (PV/T) Solar Water Heater,” Sol. Energy, 82(7), pp. 602–612. [CrossRef]
Voller, V. R. , Cross, M. , and Markatos, N. C. , 1987, “ An Enthalpy Method for Convection/Diffusion Phase Change,” Int. J. Numer. Methods Eng., 24(1), pp. 271–284. [CrossRef]
Zivkovic, B. , and Fujii, I. , 2001, “ An Analysis of Isothermal Phase Change of Phase Change Material Within Rectangular and Cylindrical Containers,” Sol. Energy, 70(1), pp. 51–61. [CrossRef]
Hasan, A. , McCormack, S. J. , Huang, M. J. , and Norton, B. , 2010, “ Evaluation of Phase Change Materials for Thermal Regulation Enhancement of Building Integrated Photovoltaics,” Sol. Energy, 84(9), pp. 1601–1612. [CrossRef]
Bahaidarah, H. , Subhan, A. , Gandhidasan, P. , and Rehman, S. , 2013, “ Performance Evaluation of a PV (Photovoltaic) Module by Back Surface Water Cooling for Hot Climatic Conditions,” Energy, 59, pp. 445–453. [CrossRef]

Figures

Grahic Jump Location
Fig. 1

Location of the solar park established in Bahawalpur-Pakistan

Grahic Jump Location
Fig. 2

Climatic data of the study area

Grahic Jump Location
Fig. 3

Photovoltaic panel integrated with PCM

Grahic Jump Location
Fig. 4

Discretization of a nodal point inside the PCM domain

Grahic Jump Location
Fig. 5

Comparison of PV cell temperature integrated with PCM with experimental results of Hassan et al. [19]

Grahic Jump Location
Fig. 6

Temperature of PV cell with and without PCM for the month of June

Grahic Jump Location
Fig. 7

Quantity of PCM solidified and liquefied (0 → completely solid; 100% → completely liquid)

Grahic Jump Location
Fig. 8

Effect of melting point of PCM on PV cell temperature

Grahic Jump Location
Fig. 9

Quantity of PCM solidified and liquefied for the first week of June

Grahic Jump Location
Fig. 10

Effect of PCM mass on peak temperature of PV cell

Grahic Jump Location
Fig. 11

Photovoltaic cell efficiency without PCM

Grahic Jump Location
Fig. 12

Effect of PCM mass on efficiency of PV cell for the first 4 days of June

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In