Research Papers

Use of Seismic Analyses for the Wind Energy Industry

[+] Author and Article Information
Weifei Hu

Department of Earth and Atmospheric Sciences,
Cornell University,
Bradfield Hall 1010,
306 Tower Road,
Ithaca, NY 14853
e-mail: wh348@cornell.edu

S. C. Pryor

Department of Earth and Atmospheric Sciences,
Cornell University,
Bradfield Hall 1117,
306 Tower Road,
Ithaca, NY 14853
e-mail: sp2279@cornell.edu

Frederick Letson

Department of Earth and Atmospheric Sciences,
Cornell University,
Bradfield Hall 1010,
306 Tower Road,
Ithaca, NY 14853
e-mail: fl368@cornell.edu

R. J. Barthelmie

Sibley School of Mechanical and
Aerospace Engineering,
Cornell University,
Upson Hall 313,
124 Hoy Road,
Ithaca, NY 14853
e-mail: rb737@cornell.edu

1Corresponding authors.

Contributed by the Solar Energy Division of ASME for publication in the JOURNAL OF SOLAR ENERGY ENGINEERING: INCLUDING WIND ENERGY AND BUILDING ENERGY CONSERVATION. Manuscript received March 8, 2017; final manuscript received June 21, 2017; published online July 27, 2017. Assoc. Editor: Yves Gagnon.

J. Sol. Energy Eng 139(5), 051007 (Jul 27, 2017) (8 pages) Paper No: SOL-17-1079; doi: 10.1115/1.4037218 History: Received March 08, 2017; Revised June 21, 2017

This paper proposes new seismic-based methods for use in the wind energy industry with a focus on wind turbine condition monitoring. Fourteen Streckeisen STS-2 Broadband seismometers and two three-dimensional (3D) sonic anemometers are deployed in/near an operating wind farm to collect the data used in these proof-of-principle analyses. The interquartile mean (IQM) value of power spectral density (PSD) of the seismic components in 10 min time series is used to characterize the spectral signatures (i.e., frequencies with enhanced variance) in ground vibrations deriving from vibrations of wind turbine subassemblies. A power spectral envelope approach is taken in which the probability density function (PDF) of seismic PSD is developed using seismic data collected under normal turbine operation. These power spectral envelopes clearly show the energy distribution of wind-turbine-induced ground vibrations over a wide frequency range. Singular PSD lying outside the power spectral envelopes can be easily identified and is used herein along with supervisory control and data acquisition (SCADA) data to diagnose the associated suboptimal turbine operating conditions. Illustrative examples are given herein for periods with yaw misalignment and excess tower acceleration. It is additionally shown that there is a strong association between drivetrain acceleration and seismic spectral power in a frequency band of 2.5–12.5 Hz. The long-term goal of the research is development of seismic-based condition monitoring (SBCM) for wind turbines. The primary advantages of SBCM are that the approach is low-cost, noninvasive, and versatile (i.e., one seismic sensor monitoring multiple turbine components).

Copyright © 2017 by ASME
Your Session has timed out. Please sign back in to continue.


DOE and NREL, 2008, “ 20% Wind Energy by 2030, Increasing Wind Energy's Contribution to U.S. Electricity Supply,” National Renewable Energy Laboratory, Golden, CO, Report No. DOE/GO-102008-2567. http://www.nrel.gov/docs/fy08osti/41869.pdf
TPWind, 2008, “ Strategic Research Agenda and Market Deployment Strategy–From 2008 to 2030,” European Wind Energy Technology Platform, Brussels, Belgium, accessed July 18, 2016, http://www.windplatform.eu/fileadmin/ewetp_docs/Bibliography/Executive_summary.pdf
Walford, C. A. , 2006, “ Wind Turbine Reliability: Understanding and Minimizing Wind Turbine Operation and Maintenance Costs,” Sandia National Laboratories, Albuquerque, NM, Sandia Report No. SAND2006-1100. http://prod.sandia.gov/techlib/access-control.cgi/2006/061100.pdf
Hatch, C. , 2004, “ Improved Wind Turbine Condition Monitoring Using Acceleration Enveloping,” Orbit, 61, pp. 58–61. https://www.orbit-magazine.com/wp-content/uploads/2014/07/2q04windturbcondmon.pdf
Lu, B. , Li, Y. , Wu, X. , and Yang, Z. , 2009, “ A Review of Recent Advances in Wind Turbine Condition Monitoring and Fault Diagnosis,” Power Electronics and Machines in Wind Applications (PEMWA), Lincoln, NE, June 24–26, pp. 1–7.
Wymore, M. L. , Van Dam, J. E. , Ceylan, H. , and Qiao, D. , 2015, “ A Survey of Health Monitoring Systems for Wind Turbines,” Renewable Sustainable Energy Rev., 52, pp. 976–990. [CrossRef]
Zaher, A. , McArthur, S. , Infield, D. , and Patel, Y. , 2009, “ Online Wind Turbine Fault Detection Through Automated SCADA Data Analysis,” Wind Energy, 12(6), pp. 574–593. [CrossRef]
Tchakoua, P. , Wamkeue, R. , Ouhrouche, M. , Slaoui-Hasnaoui, F. , Tameghe, T. A. , and Ekemb, G. , 2014, “ Wind Turbine Condition Monitoring: State-of-the-Art Review, New Trends, and Future Challenges,” Energies, 7(4), pp. 2595–2630. [CrossRef]
Yang, W. , Court, R. , and Jiang, J. , 2013, “ Wind Turbine Condition Monitoring by the Approach of SCADA Data Analysis,” Renewable Energy, 53, pp. 365–376. [CrossRef]
Faulstich, S. , Hahn, B. , and Tavner, P. J. , 2011, “ Wind Turbine Downtime and Its Importance for Offshore Deployment,” Wind Energy, 14(3), pp. 327–337. [CrossRef]
Tavner, P. , Spinato, F. , Van Bussel, G. , and Koutoulakos, E. , 2008, “ Reliability of Different Wind Turbine Concepts With Relevance to Offshore Application,” European Wind Energy Conference (EWEC), Brussels, Belgium, Mar. 31–Apr. 3, pp. 2311–2319. https://community.dur.ac.uk/supergen.wind/Phase1/docs/Tavner,%20Spinato,%20van%20Bussel,%20Koutoulakos-EWEC2008.pdf
Westwood, R. F. , Styles, P. , and Toon, S. M. , 2015, “ Seismic Monitoring and Vibrational Characterization of Small Wind Turbines: A Case Study of the Potential Effects on the Eskdalemuir International Monitoring System Station in Scotland,” Near Surf. Geophys., 13(2), pp. 115–126.
Saccorotti, G. , Piccinini, D. , Cauchie, L. , and Fiori, I. , 2011, “ Seismic Noise by Wind Farms: A Case Study From the Virgo Gravitational Wave Observatory, Italy,” Bull. Seismol. Soc. Am., 101(2), pp. 568–578. [CrossRef]
Prowell, I. , Elgamal, A. , Uang, C. , and Jonkman, J. , 2010, “ Estimation of Seismic Load Demand for a Wind Turbine in the Time Domain,” European Wind Energy Conference (EWEC), Warsaw, Poland, Apr. 20–23, pp. 4710–4717. http://nheri.ucsd.edu/projects/2010-wind-turbine/pubs/2010-nrel-prowell-elgamal-uang-jonkman.pdf
Santangelo, F. , Failla, G. , Santini, A. , and Arena, F. , 2016, “ Time-Domain Uncoupled Analyses for Seismic Assessment of Land-Based Wind Turbines,” Eng. Struct., 123, pp. 275–299. [CrossRef]
Hu, W. , Pryor, S. C. , Letson, F. , Tytell, J. , and Barthelmie, R. J. , 2017, “ Investigation of Gust-Seismic Relationships and Applications to Gust Detection,” J. Geophys. Res.: Atmos., 122(1), pp. 140–151. [CrossRef]
Letson, F. , Hu, W. , Barthelmie, R. J. , Tytell, J. , and Pryor, S. C. , 2017, “ Wind Gust Quantification Using Seismic Measurements,” 11th International Conference on Energy Sustainability, Charlotte, NC, June 26–29, Paper No. ES2017-3568.
Pryor, S. C. , Conrick, R. , Miller, C. , Tytell, J. , and Barthelmie, R. J. , 2014, “ Intense and Extreme Wind Speeds Observed by Anemometer and Seismic Networks: An Eastern US Case Study,” J. Appl. Meteorol. Climatol., 53(11), pp. 2417–2429. [CrossRef]
McNamara, D. , and Buland, R. P. , 2004, “ Ambient Noise Levels in the Continental United States,” Bull. Seismol. Soc. Am., 94(4), pp. 1517–1527. [CrossRef]
Pryor, S. C. , Hu, W. , Letson, F. , and Barthelmie, R. J. , 2016, “ Applications of Seismic Analyses to the Wind Energy Industry,” EnergyTech Magazine, Dubuque, IA, accessed July 18, 2017, http://www.energy-tech.com/advanced_energy/article_0b281b0c-a5f4-11e6-ad6e-4fcbdc8c0992.html
Tytell, J. , Vernon, F. , Hedlin, M. , Hedlin, C. D. G. , Reyes, J. , Busby, B. , Hafner, K. , and Eakins, J. , 2016, “ The US Array Transportable Array as a Platform for Weather Observation and Research,” Bull. Am. Meteorol. Soc., 97(4), pp. 603–619. [CrossRef]
Ringler, A. , and Hutt, C. , 2010, “ Self-Noise Models of Seismic Instruments,” Seismol. Res. Lett., 81(6), pp. 972–983. [CrossRef]
Welch, P. D. , 1967, “ The Use of Fast Fourier Transform for the Estimation of Power Spectra: A Method Based on Time Averaging Over Short, Modified Periodograms,” IEEE Trans. Audio Electroacoust., 15(2), pp. 70–73. [CrossRef]
The MathWorks, 2015, “ Matlab Help,” The MathWorks, Inc., Natick, MA.
Diaz, J. , 2016, “ On the Origin of the Signals Observed Across the Seismic Spectrum,” Earth Sci. Rev., 161, pp. 224–232. [CrossRef]
Xi Engineering Consultants, 2014, “ Seismic Vibration Produced by Wind Turbines in the Eskdalemuir Region,” Xi Engineering Consultants Ltd., Edinburgh, UK, Document No. FMB_203_FINAL_V5R.
Fiori, I. , Giordano, L. , Hild, S. , Losurdo, G. , Marchetti, E. , Mayer, G. , and Paoletti, F. , 2009, “ A Study of the Seismic Disturbance Produced by the Wind Park Near the Gravitational Wave Detector,” Third International Meeting on Wind Turbine Noise, Aalborg, Denmark, June 17–19, pp. 570–594.
Peterson, J. , 1993, Observations and Modeling of Seismic Background Noise, U.S. Department of Interior Geological Survey, Albuquerque, NM.
Fleming, P. , Scholbrock, A. , Jehu, A. , Davoust, S. , Osler, E. , Wright, A. , and Clifton, A. , 2014, “ Field-Test Results Using a Nacelle-Mounted Lidar for Improving Wind Turbine Power Capture by Reducing Yaw Misalignment,” J. Phys. Conf. Ser., 524(1), p. 012002. [CrossRef]
Zhang, Z. , and Kusiak, A. , 2012, “ Monitoring Wind Turbine Vibration Based on SCADA Data,” ASME J. Sol. Energy Eng., 134(2), p. 021004. [CrossRef]


Grahic Jump Location
Fig. 1

Annual failure frequency and downtime per failure ofdifferent onshore wind turbine subassemblies [10,11]. * denotes turbine components expected to produce a vibrational signature that can be detected using seismometers. WMEP and LWK shown in the legend refer to two wind turbine reliability studies: the Scientific Measurement and Evaluation Programme (WMEP) [10] and the Schleswig–Holstein LandWirtschaftsKammer (LWK) [11].

Grahic Jump Location
Fig. 2

A photograph of a Streckeisen STS-2 broadband seismometer (photograph reproduced courtesy of the Incorporated Research Institutions for Seismology (IRIS) Portable Array Seismic Studies of the Continental Lithosphere (PASSCAL) Instrument Center).

Grahic Jump Location
Fig. 3

A photograph of a vaulted seismic station

Grahic Jump Location
Fig. 4

A sample 10 min period of wind speeds from a sonic anemometer at hub-height, seismic signals (HNZ, HNN, and HNE) collected by (a) SS1 at the base of WT1 and (b) BSS1. Note the change of scale in the second to fourth panels in (a) and (b).

Grahic Jump Location
Fig. 5

Mean, median, IQM, and lower and upper bound of 95% confidence interval of PSD of HNE collected by (a) SS2, (b) SS3, and (c) SS4 at the base of WT2 for V10 ≈ 10 m s−1. Note the median and IQM PSD overlap and thus are not differentiable in the panels above.

Grahic Jump Location
Fig. 6

IQM of PSD of HNZ, HNN, and HNE collected by (a) SS2, (b) SS3, and (c) SS4, at the base of WT2 for V10 ≈ 12 m s−1

Grahic Jump Location
Fig. 7

IQM of PSD of HNN collected by (a) SS2, (b) SS3, and (c) SS4, at the base of WT2 under different 10 min mean hub-height wind speeds (V10)

Grahic Jump Location
Fig. 8

Spectral envelope of PSD of HNZ, under all wind speeds, collected by (a) SS2, (b) SS3, (c) SS4 at the base of WT2, (d) BSS1, and (e) BSS2

Grahic Jump Location
Fig. 9

IQM of PSD of HNE collected by (a) SS1 at the base of WT1, (b) SS5 at the base of WT3, (c) BSS1, and (d) BSS2 for V10 ≈ 8 m s−1 under different “yaw misalignments”

Grahic Jump Location
Fig. 10

Spectral envelope of PSD of HNZ collected by (a) SS1 at the base of WT1, (b) SS5 at the base of WT3, (c) BSS1, and (d) BSS2 for V10 ≈ 8 m s−1

Grahic Jump Location
Fig. 11

Scatterplot and polynomial fit of the relationship between drivetrain acceleration and ISPSD over f ∼ 2.5–12.5 Hz of HNZ collected by (a) SS1 at the base of WT1, (b) SS5 at the base of WT3, (c) BSS1, and (d) BSS2



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In