0
Technical Briefs

Distributed Generation, Using Battery/Photovoltaic System: Modeling and Simulation With Relative Controller Design

[+] Author and Article Information
Peyman Naderi

Electrical Engineering Department,
Shahid Rajaee Teacher Training University,
Tehran 1678815811, Iran
e-mail: p.naderi@srttu.edu

Contributed by the Solar Energy Division of ASME for publication in the JOURNAL OF Solar Energy Engineering. Manuscript received April 6, 2012; final manuscript received November 9, 2012; published online January 25, 2013. Assoc. Editor: Santiago Silvestre.

J. Sol. Energy Eng 135(2), 024506 (Jan 25, 2013) (6 pages) Paper No: SOL-12-1093; doi: 10.1115/1.4023102 History: Received April 06, 2012; Revised November 09, 2012

Distributed generation (DG) using a parallel battery pack with photovoltaic (PV) system has been presented in this brief. Considering a two level inverter and a three phase transformer, a local load will be supplied by the DG and connected to a power grid. The DG has been connected to the high voltage network via a filter and a distribution power station. A nero-fuzzy network has been designed for the estimation of maximum power ability of PV and the connected dc/dc converter has been controlled relatively. So, the power management between the PV system and the battery pack can be confirmed. On the other hand, another controller has been designed for control of transferred power between the power network and the DG system that can control the battery pack power indirectly. Finally, a series of simulation results show the effectiveness of proposed method for some various conditions.

FIGURES IN THIS ARTICLE
<>
Copyright © 2013 by ASME
Your Session has timed out. Please sign back in to continue.

References

Nigm, K., and Hegazy, Y., 2003, “Intention Islanding of Distributed Generation for Reliability Enhancement,” IEEE Power Engineering Society General Meeting (PES 2003), Toronto, Canada, July 13–17, pp. 208–213. [CrossRef]
Pilo, F., Celli, G., and Mocci, S., 2004, “Improvement of Reliability in Active Networks With Intentional Islanding,” IEEE International Conference on Electric Utility Deregulation, Restructuring, and Power Technologies (DRPT 2004), Hong Kong, April 5–8, pp. 474–479. [CrossRef]
ZeinElDin, H. H., Bhattacharya, K., El-Saadany, E. F., and Salama, M. M. A., 2006, “Impact of Intentional Islanding of Distributed Generation on Electricity Market Prices,” IEE Proc.: Gener., Transm. Distrib., 153(2), pp. 147–154. [CrossRef]
IEEE Std. 929-2000, 2000, “IEEERecommended Practice for Utility Interface of Photovoltaic (PV) Systems.” [CrossRef]
IEEE Std. 1547-2003, 2003, “IEEEStandard for Interconnecting Distributed Resources With Electric Power Systems.” [CrossRef]
Barsali, S., Ceraolo, M., Pelachi, P., and Poli, D., 2002, “Control Techniques of Dispersed Generators to Improve the Continuity of Electricity Supply,” IEEE Power Engineering Society Winter Meeting, New York, January 27–31, pp. 789–794. [CrossRef]
Liang, J., Green, T. C., Weiss, G., and Zhong, Q., 2003, “Hybrid Control of Multiple Inverters in an Island-Mode Distribution System,” IEEE 34th Annual Conference on Power Electronics Specialist (PESC’03), Acapulco, Mexico, June 15–19, pp. 61–66. [CrossRef]
Marei, M. I., El-Saadany, E. F., and Salama, M. M. F., 2004, “A Novel Control Algorithm for the DG Interface to Mitigate Power Quality Problems,” IEEE Trans. Power Deliv., 19(3), pp. 1384–1392. [CrossRef]
Zeineldin, H., Marei, M. I., El-Saadany, E., and Salama, M. M. A., 2004, “Safe Controlled Islanding of Inverter Based Distributed Generation,” IEEE Power Engineering Specialist Conference (PESC’04), Aachen, Germany, June 20–25. [CrossRef]
Li, Y., Vilathgamuwa, D. M., and Loh, P., 2004, “Design, Analysis and Real Time Testing of a Controller for Multibus Microgrid System,” IEEE Trans. Power Electron., 19, pp. 1195–1204. [CrossRef]
Tsai, H.-L., Tu, C.-S., and Su, Y.-J., 2008, “Development of Generalized Photovoltaic Model Using MATLAB/SIMULINK,” Proceedings of the World Congress on Engineering and Computer Science (WCECS 2008), San Francisco, October 22–24.
matlab Software Guide, Version2010, Power System Toolbox, Electrical Sources Part, The MathWorks Inc., Natick, MA.
Naderi, P., and Farhadi, A., 2012, “Non-Driven Wheels Application for Intelligent Multi-Objective Control of Hybrid Vehicles,” Int. J. Rob. Control, 27(2), pp. 185–197. [CrossRef]
Naderi, P., and Mohammadi, T., 2011, “Distributed Generation, Using Battery Pack and Fuzzy Controller for Charge/Discharge Control,” J. Power Energy Syst., 5(3), pp. 330–342. [CrossRef]

Figures

Grahic Jump Location
Fig. 1

Proposed structure in this paper

Grahic Jump Location
Fig. 2

Sample curve for a given temperature equal to 0 °C

Grahic Jump Location
Fig. 3

Sample curve for a given irradiance equal to maximum level

Grahic Jump Location
Fig. 4

Two level three phase inverter connected to dc/dc converter

Grahic Jump Location
Fig. 5

Maximum power available of sample PV system based on various temperature and irradiance

Grahic Jump Location
Fig. 6

Membership functions of nero-fuzzy network used for estimation

Grahic Jump Location
Fig. 7

Fuzzy surface of nero-fuzzy network used for estimation

Grahic Jump Location
Fig. 8

Producing of dc/dc converter switching pulse

Grahic Jump Location
Fig. 9

Control of transferred power between DG and power system

Grahic Jump Location
Fig. 10

Overall controller diagram and interaction of subcontrollers

Grahic Jump Location
Fig. 11

Produced power of system for high irradiance, high SoC, and variable temperature

Grahic Jump Location
Fig. 12

Voltage and current of PV system for high irradiance, high SoC, and variable temperature

Grahic Jump Location
Fig. 13

The SoC for some initial SoC

Grahic Jump Location
Fig. 14

The injection power from DG to power network for some initial SoC

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In